Home » Service & Support » Technical Documentation
Masoneilan SVI3 vs SVI2 - Generational Differences & Selection
Release time:2026-11-23 01:35:36 | Views:

Masoneilan (now part of Baker Hughes) introduced the SVI II AP (commonly SVI2) after the SVi1000, and then the third-generation flagship SVI3. All three share mounting brackets and a 4-20 mA + HART platform, but differ in travel sensing, action mode, diagnostic depth and Ex certification. This article compares SVI2 and SVI3 item by item against the official manuals and data sheets and gives selection logic for deciding between upgrade replacement and a fresh selection.

I. Three-Generation Positioning

SeriesGenerationActionTravel sensingCommunicationDiagnostics
SVi1000Previous-generation economic smart typeSingle-acting (reverse amplifier for double-acting)Magnetic sensing, contacting mechanical feedback rodHART 5 (HART 7 with new firmware)No advanced diagnostics, local alarm only
SVI II AP (SVI2)Second generation, full single/double-acting coverageSingle / double acting (standard / high flow)Hall-effect magnetic feedback, non-contactHART 5 / 6ES smart / SD standard / AD advanced, three levels
SVI3Third-generation flagship, modularSingle-acting (reverse amplifier for double-acting)Non-contact shielded magnetic sensingHART 7Basic / offline advanced / online diagnostics, three levels

Source: MASONEILAN (Baker Hughes) smart valve positioner selection and parameter summary (SVI II AP operating manual, SVI3 data sheet, SVi1000 specification manual, NEPSI 3C certificate 2020322307001314); subject to the latest official catalog.

All three generations share mounting brackets: SVI3 brackets are fully backward compatible with SVI II AP / SVi1000, so retrofit projects can reuse the original bracket - a real advantage of Masoneilan. When quoting "with display", note that SVi1000 has only LEDs and no graphic screen; true local display starts with SVI2 (display cover retrofit capable) or SVI3 (optional LCD).

Masoneilan SVI2 digital positioner
Masoneilan SVI2 positioner, for selection reference only; SVI3 subject to the official catalog

II. Core Parameter Comparison

ParameterSVI2SVI3
Input signal4-20 mA loop powered4-20 mA loop powered
Minimum start current3.2 mA3.2 mA
CommunicationHART 5 / 6HART 7
Action modeSingle / double acting (standard / high flow)Single-acting (reverse amplifier for double-acting)
AccuracyTypical ±0.5% F.S.±0.5% F.S. (linear characteristic)
Linear travel0.25"-2.5" (6-64 mm)0.25"-8" (6.4-200 mm)
Rotary travel18 deg to 140 deg18 deg to 140 deg
Ambient temperature-40 to +85 CStandard -40 to +85 C; extreme -55 to +85 C
Supply pressureSingle 1.4-6.9 bar; double 1.73-10.3 bar1.4-8.3 bar, proof pressure 12.4 bar
Steady air consumption0.2-0.35 scfm2.8-3.4 SLPM at 30/45 psi
Ingress ratingIP66 class (per certification)IP66 & NEMA 4X
WeightStandard aluminum 3.3 kg / stainless 7.3 kgAluminum 3.3 kg / stainless 6.26 kg

Source: MASONEILAN (Baker Hughes) smart valve positioner selection and parameter summary (SVI II AP operating manual, SVI3 data sheet, SVi1000 specification manual, NEPSI 3C certificate 2020322307001314); subject to the latest official catalog.

III. Ex Certifications and Electrical Interfaces

ItemSVI2SVI3
Ex protectionIntrinsically safe and flameproof (varies with certification code)Flameproof, intrinsically safe, dust ignition protection, increased safety e
Main certificationsATEX / FM / CSA / NEPSI / IEC etc.ATEX / IECEx / US / Canada / UKEX etc.
Functional safetyNo SIL claimIEC 61508 SIL 3 (EXIDA)
Electrical connection2 x 1/2" NPT (adaptable to M20)2 x 1/2" NPT female
Local displayOptional LCD + buttons (display cover retrofit capable)Optional high-contrast graphic LCD + 4 buttons, hazardous-area approved

Source: MASONEILAN (Baker Hughes) smart valve positioner selection and parameter summary (SVI II AP operating manual, SVI3 data sheet, SVi1000 specification manual, NEPSI 3C certificate 2020322307001314); subject to the latest official catalog.

The exact Ex marking of SVI2 and SVI3 varies with the chosen certification code and area; check the certification field of the full ordering number when placing an order. Ex ia intrinsic safety and Ex d flameproof enclosure are different protection types with different wiring and cover-opening rules and must not be mixed; consult the manufacturer where unclear. For domestic 3C requirements, SVi1000 may be preferred (valid NEPSI 3C certificate 2020322307001314).

IV. Functions and Diagnostics

CapabilitySVI2SVI3
Ramp / step testYesYes
Cycle count / travel odometerYesYes
Valve signature (friction, spring range, seat profile)Only with AD advanced diagnosticsAvailable with offline advanced diagnostics
Online valve diagnostics (stiction, obstruction, RMS error)NoOnly with a=3 online diagnostics; one-year data storage
NAMUR NE 107 alarmNot listed in catalogYes
Partial stroke test (PST)Requires SVI II ESD modelPST not listed for SVI3
One-button tuningConventional initializationSmartCal completes setup and calibration without extra tools

Source: MASONEILAN (Baker Hughes) smart valve positioner selection and parameter summary (SVI II AP operating manual, SVI3 data sheet, SVi1000 specification manual, NEPSI 3C certificate 2020322307001314); subject to the latest official catalog.

The diagnostics level (field a) can be upgraded by software without changing hardware, but the nameplate model stays unchanged; changing the physical nameplate requires explicit user consent. For SIL3, only SVI3 carries an explicit claim; for PST, discuss SVI II ESD rather than promising PST on SVI2/SVI3.

V. Generational Selection Logic

RequirementRecommendation
Native single/double acting with full standard and high-flow coveragePrefer SVI2
HART 7, longer linear travel (up to 200 mm), online diagnostics and SIL3Prefer SVI3
True local graphic display neededSVI3 optional LCD, or SVI2 display cover retrofit
Domestic 3C intrinsically safe project, cost sensitiveSVi1000 (with 3C certificate)
Retrofit reusing the original bracketSVI3 brackets fully backward compatible with SVI2 / SVi1000
PST / ESD neededSVI II ESD; do not promise PST on SVI2/SVI3

Source: MASONEILAN (Baker Hughes) smart valve positioner selection and parameter summary (SVI II AP operating manual, SVI3 data sheet, SVi1000 specification manual, NEPSI 3C certificate 2020322307001314); subject to the latest official catalog.

Selection sequence: decide single/double acting and linear/rotary travel first, then the communication version (HART in this batch), then narrow by position feedback, display, diagnostic depth and Ex certification, and finally rely on the complete code generated by the official ordering tool. SVI2 and SVI3 are not a simple old-for-new replacement: linear travel range and native action mode differ, so check item by item before substitution.

Selection guide: The difference between SVI2 and SVI3 is more than generational: SVI2 is natively single/double acting with HART 5/6 and 6-64 mm linear travel; SVI3 is HART 7 with 6.4-200 mm travel, online diagnostics and SIL3. Decide action mode and travel first, then diagnostics and certification. Brackets are backward compatible but the models are not directly interchangeable.

Common models: SVi1000 (economic intrinsically safe, 3C), SVI II AP / SVI2 (second generation, standard/high flow), SVI3 (third-generation flagship, SIL3), SVI II ESD (SIL3 emergency shutdown and PST); related but separate products include SVI FF and 4700/4800P/E.

If you are considering upgrading SVI2 to SVI3, or are unsure whether the existing bracket can be reused and how diagnostic levels map to SIL requirements, please share the valve travel, action mode and certification needs. We can check item by item and avoid treating two generations as the same model.

Orders & Inquiries

Baoman Industrial Technology (Chengdu) Co., Ltd
Tel: +86 028-60220547 | Email: info@bit-cd.com
Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China

The information above is not guaranteed to remain valid at all times. Subsequent changes will not be notified separately. Please confirm the latest information at the time of inquiry.