Home » Service & Support » Technical Documentation
Masoneilan Model 78 Air Filter Regulator - Technical Data & Applications
Release time:2026-11-23 01:35:36 | Views:

In Masoneilan literature, the "Type 78" usually refers to the Model 78 series air filter regulator - a reducing instrument that supplies stable, clean air to positioners, I/P converters and other process control devices, rather than a valve positioner itself. The official installation and maintenance manual GEA31190D lists two standard models, 78-4 and 78-40. This article follows the official manual on model rules, technical data, materials and application boundaries, and separates it from the 78-80/08-80 transfer valves and the SVI digital positioners.

I. Product Positioning and Identity

ItemDescription
BrandMasoneilan (now part of Baker Hughes, formerly GE Oil & Gas)
SeriesModel 78 series air filter regulator (air set)
FunctionFilters, reduces and relieves air; supplies stable air to positioners and I/P converters
Official manualGEA31190D, Rev. D, 2017-03; an installation/maintenance manual, not a selection catalog
Standard modelsOnly 78-4 and 78-40; connection fixed at 1/4 NPT
Common confusion78-80H/08-80H and 78-80S/08-80S are transfer/lock-up valves; SVI1000/SVI2/SVI3 are digital positioners

Source: GE Oil & Gas - Masoneilan Model 78 Series Air Filter Regulator Instructions Manual, Rev. D, document GEA31190D (2017-03); Model 78-80H/08-80H and 78-80S/08-80S Transfer Valve Instructions Manual (2017). Connections, materials, Cv and temperature are fixed standard values in that manual; no expanded ordering code is given. Subject to the latest official catalog.

Clarify the identity first: the Model 78 in the official manual is an air filter regulator that supplies air to a positioner; it is not itself a positioner converting an electrical signal into pneumatic pressure. If a document says "Type 78 positioner", check the nameplate and packing list to confirm whether it means the 78 air set, a 78-80 transfer valve, or another positioner model.

Masoneilan digital positioner, illustration
Masoneilan digital positioner, illustration only, not the actual Type 78; parameters subject to the official catalog

II. Model Numbering Rules

ModelPressure set rangeDescription
78-45-40 psi (35-280 kPa, 0.35-2.8 bar)Air loading with relief and filter
78-405-100 psi (35-700 kPa, 0.35-7 bar)Air loading with relief and filter

Source: GE Oil & Gas - Masoneilan Model 78 Series Air Filter Regulator Instructions Manual, Rev. D, document GEA31190D (2017-03); Model 78-80H/08-80H and 78-80S/08-80S Transfer Valve Instructions Manual (2017). Connections, materials, Cv and temperature are fixed standard values in that manual; no expanded ordering code is given. Subject to the latest official catalog.

The model template is "78 - [pressure range code]": 78 is the series, suffix -4 means 5-40 psi and -40 means 5-100 psi. This manual is an installation/maintenance document giving only these two standard models; it provides no expanded ordering options for connection size, materials, Ex certification or gauges - those are fixed standard configurations. For optional configurations, consult the Masoneilan Type 78 selection catalog rather than inferring from this manual.

III. Main Technical Data

ItemSpecification
Inlet pressure rating210 psi (1.5 MPa, 15 bar) maximum
Pressure set range78-4: 5-40 psi; 78-40: 5-100 psi
Air connection1/4 NPT (fixed standard connection on both models)
Rated Cv0.25
Filter elementSintered porous polyethylene, 5 micron
Ambient temperature-40 to +83 C (-40 to +182 F)
Air consumption0.004 scfm (100 sccm)
Weight14 oz. (0.4 kg)
FunctionFiltration + regulation + relief

Source: GE Oil & Gas - Masoneilan Model 78 Series Air Filter Regulator Instructions Manual, Rev. D, document GEA31190D (2017-03); Model 78-80H/08-80H and 78-80S/08-80S Transfer Valve Instructions Manual (2017). Connections, materials, Cv and temperature are fixed standard values in that manual; no expanded ordering code is given. Subject to the latest official catalog.

IV. Materials and Dimensions

PartStandard material
Body / spring casing / bottom capAluminum die casting
Knob / spacer / plug guide / aspiratorVALOX 420
Diaphragm / O-ringNBR nitrile rubber
PlugNeoprene / 416 stainless steel
FilterSintered polyethylene
Adjusting screw / lock screw / drain cockStainless steel
SpringCoated spring steel
Spring buttonZn-Cr plated carbon steel

Source: GE Oil & Gas - Masoneilan Model 78 Series Air Filter Regulator Instructions Manual, Rev. D, document GEA31190D (2017-03); Model 78-80H/08-80H and 78-80S/08-80S Transfer Valve Instructions Manual (2017). Connections, materials, Cv and temperature are fixed standard values in that manual; no expanded ordering code is given. Subject to the latest official catalog.

Mounting itemDimension
Threaded holes for mounting bracketM5
Outline dimensions (section/top view)52 / 81 / 60 / 55 / 141 mm (approx. 2.05 / 3.19 / 2.36 / 2.17 / 5.55 in)

Source: GE Oil & Gas - Masoneilan Model 78 Series Air Filter Regulator Instructions Manual, Rev. D, document GEA31190D (2017-03); Model 78-80H/08-80H and 78-80S/08-80S Transfer Valve Instructions Manual (2017). Connections, materials, Cv and temperature are fixed standard values in that manual; no expanded ordering code is given. Subject to the latest official catalog.

V. Applications and Selection Notes

ApplicationNote
Positioner air supplySupplies stable instrument air to SVI, SAMSON, Fisher and other positioners; check whether Cv 0.25 covers the positioner air demand
I/P converter supplyProvides clean, regulated air to I/P converters; the 5 micron element suits general instrument air quality
Small-flow air pointsRegulation and filtration for single units and small pneumatic devices; relief prevents overpressure
Not suitable forHigh air demand, optional connection/material/Ex configurations, or when a positioning function is required - this manual cannot support such selection

Source: GE Oil & Gas - Masoneilan Model 78 Series Air Filter Regulator Instructions Manual, Rev. D, document GEA31190D (2017-03); Model 78-80H/08-80H and 78-80S/08-80S Transfer Valve Instructions Manual (2017). Connections, materials, Cv and temperature are fixed standard values in that manual; no expanded ordering code is given. Subject to the latest official catalog.

Selection sequence: first decide whether the need is air preparation or valve positioning, then choose 78-4 or 78-40 by pressure set range, and finally verify inlet pressure does not exceed 15 bar and ambient temperature stays within -40 to +83 C. Ordering codes for Ex certification, special connections or materials are not given in this manual; obtain the official selection catalog or rely on the nameplate and order.

Selection guide: The Type 78 series is an air preparation device, not a positioner: decide the function boundary (air preparation versus positioning) first, then choose 78-4 (5-40 psi) or 78-40 (5-100 psi) by pressure set range. Connection is fixed at 1/4 NPT and Cv is 0.25, all from GEA31190D; configurations needing flameproof enclosure, special connections or materials are outside this manual - please consult for confirmation.

Common models: 78-4 (5-40 psi / 0.35-2.8 bar), 78-40 (5-100 psi / 0.35-7 bar); related but separate products include 78-80H/08-80H (high-capacity transfer valve, Cv 4.5/5.0) and 78-80S/08-80S (standard capacity, Cv 0.8/1.3), plus the SVI1000 / SVI2 / SVI3 digital positioners.

If a spare parts list shows "Type 78" but you are unsure whether it means a filter regulator, a transfer valve or a positioner, please share the nameplate data and the site function. We can work against the official manual to confirm the product identity, pressure range and connection and help avoid ordering the wrong air set.

Orders & Inquiries

Baoman Industrial Technology (Chengdu) Co., Ltd
Tel: +86 028-60220547 | Email: info@bit-cd.com
Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China

The information above is not guaranteed to remain valid at all times. Subsequent changes will not be notified separately. Please confirm the latest information at the time of inquiry.