Home » Service & Support » Technical Documentation
Fisher Actuators - Diaphragm & Seal Spare Parts List
Release time:2026-11-23 01:35:36 | Views:

The wear parts of Fisher pneumatic actuators are concentrated in diaphragms, O-rings and stem seals, with service temperature and cycle count determining replacement intervals. This article organizes diaphragm materials and temperature ranges by actuator family, lists common repair kit and magnet strip part numbers for positioners and boosters, and gives spare-part management points; actual part numbers are subject to the official parts lists and nameplates.

I. Product Positioning

ItemDescription
BrandFisher (Emerson)
Actuator families657 / 667 / 655 / 656 / 3025 diaphragm; 585C / 685 piston; 1052 rotary
Wear partsDiaphragms, O-rings, stem packing, springs, guides
Related accessoriesDVC2000 / DVC6200 positioners, 2625 / VBL boosters, 67C/67D regulators
Key documentsD100087X012, D103409X012, D100348X012 and official parts lists

Source: Fisher 657 / 667 diaphragm actuator product bulletin D100087X012 (61.1:657); DVC6200 manual D103409X012; 2625 manual D100348X012; actuator parts lists subject to the official manuals.

Actuator diaphragm, illustration
Actuator diaphragm, illustration only, not a Fisher product; for illustration only, not the actual model; parameters subject to the official data sheet

II. Diaphragm Materials and Temperature Ranges

ActuatorStandard diaphragm / temperatureOptional diaphragm / temperature
657 / 667Nitrile -40 to 82 C (-40 to 180 F)Silicone -54 to 149 C (-65 to 300 F); low-temperature version to -50 C
657NS2 / 667NS2 (nuclear)EPDM -40 to 82 CEPDM up to 121 C / 250 F (reduced life)
1052PSV size 60EPDM -40 to 107 C (-40 to 225 F)Verify by service conditions
DVC6200 internal elastomerNitrile (standard)Fluorosilicone (extreme -52 to +85 C; remote unit -52 to +125 C)
2625 boosterNitrile / nylon diaphragm2625NS uses EPDM / meta-aramid

Source: Fisher 657 / 667 diaphragm actuator product bulletin D100087X012 (61.1:657); DVC6200 manual D103409X012; 2625 manual D100348X012; actuator parts lists subject to the official manuals.

Diaphragm selection is essentially about temperature and medium compatibility: standard nitrile covers normal service; silicone for high temperature; EPDM / fluorosilicone for low temperature or nuclear duty. When replacing, inspect both diaphragm plates, springs and seats together; do not change the diaphragm alone without checking other wear parts.

III. Booster and Positioner Repair Kits

CategoryApplicabilityPart number
Diaphragm kit2625, 3/32" exhaustR2625D33212
Diaphragm kit2625, 3/8" exhaustR2625D38012
Diaphragm kit2625, 1/2" exhaustR2625D12012
Valve plug kit2625, 3/8" supplyR2625V38012
Valve plug kit2625, 1/2" supplyR2625V12012
Diaphragm kit2625SST, 3/8" exhaustR2625SD3812
Diaphragm kit2625SST, 1/2" exhaustR2625SD1212
Spring kitMax supply 2.8 / 10.3 barR2625S40012 / R2625S15012

Source: Fisher 657 / 667 diaphragm actuator product bulletin D100087X012 (61.1:657); DVC6200 manual D103409X012; 2625 manual D100348X012; actuator parts lists subject to the official manuals.

IV. Common Positioner and Accessory Part Numbers

CategoryApplicabilityPart number / note
I/P converter kitDVC6000 standard38B6041X152
Cover assemblyDVC6000 aluminium / extreme / stainless38B9580X012 / X032 / X042
Feedback magnet stripDVC6000 remote DVC6015 / 6025 / 603549B7986X012 / 49B7987X012 / 49B7988X012
Junction box kitDVC6000 remote mountGE00418X012
Magnetic feedback arrayDVC2000 sliding stem 110 / 210 mmR4300AAX112 / GG20240X082 / GG20243X012
Positioner order code exampleDVC6200 HART / Housing B / Al / with I/O / nitrile / double-actingGE40184XAT2
Mounting bracket657/667 size 30-60 / size 70-87GG12343X012 / GG12361X012
Pressure gaugeDVC series 0-160 psi / 0-1.1 MPa18B7713X022 (per official parts list)

Source: Fisher 657 / 667 diaphragm actuator product bulletin D100087X012 (61.1:657); DVC6200 manual D103409X012; 2625 manual D100348X012; actuator parts lists subject to the official manuals.

V. Spare Part Management and Selection Guide

Spare management order: actuator model and size, then diaphragm material and temperature, then repair kit and accessory part numbers. Within one family, diaphragm area and thrust vary widely; 657/667 sizes 30 to 100 range from about 10 kN to 200 kN allowable thrust, so spares must match the size exactly. Before replacing discontinued parts such as DVC6200 HW1, confirm HW2 / DVC7K compatibility. All part numbers are subject to official parts lists and nameplates; where unavailable, answer "please consult for confirmation" rather than inventing.

Selection guide: Select in the order of actuator model and size, diaphragm material / temperature, repair kit number and accessories. Diaphragms and seals are classified by material rather than price; high / low temperature, nuclear and natural gas services require the matching elastomer to avoid early failure.

Common models: 657/667 diaphragm actuators (nitrile / silicone / EPDM), 1052 rotary (EPDM), DVC6200 positioner (nitrile / fluorosilicone), 2625 / 2625SST booster repair kits, 67C/67D regulator seal sets.

If you need a diaphragm or seal set for a specific actuator, or only have the nameplate and are unsure of the repair kit number, please share the actuator model, size, medium temperature and existing part number. We can check material and part number together and help avoid incompatible spares.

Orders & Inquiries

Baoman Industrial Technology (Chengdu) Co., Ltd
Tel: +86 028-60220547 | Email: info@bit-cd.com
Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China

The information above is not guaranteed to remain valid at all times. Subsequent changes will not be notified separately. Please confirm the latest information at the time of inquiry.