| Fisher 67CFR Filter Regulator - Technical Data & Selection (1/4" NPT only) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Release time:2026-11-23 01:35:36 | Views: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The Fisher 67CFR is a direct-acting instrument filter regulator of the 67C family, with an aluminium body, 1/4" NPT connections only, an integral 5 micron filter and a soft-seat internal relief valve. It is a common choice for supplying single instruments and small pneumatic devices. This article covers technical data, outlet spring ranges, selection steps and family boundaries, with emphasis on the 1/4" NPT limit. I. Product Positioning
Source: Fisher 67C series instrument regulator technical manual, document 5469; 67D series pressure-reducing regulator manual, document 5858.
II. Main Technical Data
Source: Fisher 67C series instrument regulator technical manual, document 5469; 67D series pressure-reducing regulator manual, document 5858. The internal relief valve has a Cv of only 0.045 and can handle minute seat leakage only; it is not full overpressure protection. If inlet pressure can exceed the maximum rating of downstream equipment, a separate relief or limiting device must be added. This is the most commonly misread point in 67CFR selection and installation. III. Outlet Springs and Material Selection
Source: Fisher 67C series instrument regulator technical manual, document 5469; 67D series pressure-reducing regulator manual, document 5858.
Source: Fisher 67C series instrument regulator technical manual, document 5469; 67D series pressure-reducing regulator manual, document 5858. IV. Selection Steps and Ordering Examples
Source: Fisher 67C series instrument regulator technical manual, document 5469; 67D series pressure-reducing regulator manual, document 5858. Typical order codes: 67CFR-224 (1/4", 0-35 psig, no gauge), 67CFR-226 (0-125 psig, no gauge), 67CFR-235 (with gauge), 67CFR-239 (1/4 NPT, 0-8.6 bar / 0-125 psig, with gauge), 67CF-1663-38512 / 38550. Full codes and pressure scales are subject to the official manual and nameplate. V. Family Boundaries and Selection Guide
Source: Fisher 67C series instrument regulator technical manual, document 5469; 67D series pressure-reducing regulator manual, document 5858. Red line: the 67CFR has 1/4" NPT connections only; never assume 1/2" or other ports; 1/2" high-flow needs belong to the 67D platform. Select in the order port size, material, outlet spring, gauge and special options. For low temperature note that VMQ is incompatible with hydrocarbon gas; high aromatic service requires a different filter element; full overpressure protection requires an external relief device. Selection guide: Select in the order of 1/4" port size, material and environment, then outlet spring and accessories. The only connection is 1/4" NPT; any 1/2" reference points to the 67D, not this model. Outlet pressure is set by changing the spring; never adjust beyond the marked range. Common models: 67CFR-224 (0-35 psig, no gauge), 67CFR-226 (0-125 psig), 67CFR-235 / 239 (with gauge), 67CF-1663-38512 / 38550; stainless alternative 67CFSR. If you are selecting a filter regulator for a positioner or a single instrument, or are unsure about the pressure range and gauge configuration behind a 67CFR suffix, please share the port size, medium and required outlet pressure. We can review the order code together and avoid mixing up the 1/4" and 1/2" platforms. Orders & InquiriesBaoman Industrial Technology (Chengdu) Co., LtdTel: +86 028-60220547 | Email: info@bit-cd.com Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China The information above is not guaranteed to remain valid at all times. Subsequent changes will not be notified separately. Please confirm the latest information at the time of inquiry. |

简体中文
ENGLISH
