Home » Service & Support » Technical Documentation
Fisher DVC6200S Stainless Steel Housing & Housing Material Options (Segment 2 Co
Release time:2026-11-23 01:35:36 | Views:

The standard Fisher DVC6200 housing is A03600 low-copper aluminium. For corrosive, food and pharmaceutical, or coastal high-humidity service, a stainless steel housing is available. Stainless is not a separate series; it is obtained by writing code 2B in segment 2 of the order code. This article explains the 2A/2B material codes, the segment 3 housing-type restriction, and the differences in weight, elastomer and temperature.

I. Product Positioning

ItemDescription
BrandFisher (Emerson)
SeriesFIELDVUE DVC6200 digital valve controller
Standard housingA03600 low-copper aluminium (segment 2 code 2A)
Stainless optionSegment 2 code 2B, stainless with fluorosilicone elastomer, Housing B only
Typical serviceCorrosive areas, food and pharma, coastal humidity, frequent washdown
EnclosureCSA / FM Type 4X, IP66; ATEX / IECEx IP66
Key documentsD104363X0CN, D103409X012, D103557X012

Source: Fisher Bulletin 62.1 "Digital Valve Controller" D104363X0CN; DVC6200 instruction manual D103409X012 (Table 1-2 Specifications); DVC6200 SIS manual D103557X012; diagnostic levels D103605X012.

Fisher DVC6200 digital valve controller
Fisher DVC6200 digital positioner, same-series illustration; for illustration only, not the actual model; parameters subject to the official data sheet

II. Segment 2 Housing Material Codes

CodeMaterialKey note
2AAluminiumStandard A03600 low-copper aluminium; nitrile elastomer by default; XT option for -52 C with fluorosilicone
2BStainless steelStainless housing with fluorosilicone elastomer; Housing B only (segment 3 code 3A); default low rating -52 C

Source: Fisher Bulletin 62.1 "Digital Valve Controller" D104363X0CN; DVC6200 instruction manual D103409X012 (Table 1-2 Specifications); DVC6200 SIS manual D103557X012; diagnostic levels D103605X012.

Important: 2B is not a free-standing material upgrade. The official ordering table restricts 2B to Housing B (the general housing). Segment 3 code 3B is Housing A, the one-piece aluminium design for Fisher GX valves, and cannot be combined with 2B stainless. Also, the 2B stainless construction includes fluorosilicone elastomer as standard, so the XT extreme-temperature option is normally unnecessary.

III. Stainless vs Aluminium: Key Differences

ItemAluminium (2A)Stainless (2B)
Housing materialA03600 low-copper aluminiumStainless steel
Standard elastomerNitrile (NBR)Fluorosilicone
Low-temperature rating-40 C; XT option to -52 C-52 C by default
Ambient temperature-40 to +85 C-40 to +85 C (fluorosilicone -52 to +85 C)
WeightDVC6200 approx. 3.5 kgDVC6200 approx. 8.6 kg
RM remote mountAvailable (aluminium)Not offered
EnclosureType 4X / IP66Type 4X / IP66
Max inlet pressure10.0 bar (145 psig) or actuator rating, whichever lowerSame

Source: Fisher Bulletin 62.1 "Digital Valve Controller" D104363X0CN; DVC6200 instruction manual D103409X012 (Table 1-2 Specifications); DVC6200 SIS manual D103557X012; diagnostic levels D103605X012.

IV. Ordering Example and Identification

ItemExample / note
Ordering exampleDVC6200H 1D_2B_3A_4A_5A_6B_7C_8A_PD
Segment meaningHART body / ATEX Ex d / stainless housing / Housing B / fieldbus module n.a. / single-acting direct / no I/O / 0-60 psig gauge / 1/2 NPT + 1/4 NPT / performance diagnostics
Obsolete prefixDVC6200S was an old prefix for stainless DVC6200 and is obsolete; use segment 2B instead
Field identificationRely on the nameplate, serial card and order acknowledgement, not appearance

Source: Fisher Bulletin 62.1 "Digital Valve Controller" D104363X0CN; DVC6200 instruction manual D103409X012 (Table 1-2 Specifications); DVC6200 SIS manual D103557X012; diagnostic levels D103605X012.

V. Selection Guide and Common Models

Judge whether a real corrosion risk exists: 2A aluminium is sufficient for ordinary indoor or outdoor service; choose 2B stainless for coastal, chemical, acid/alkali or frequent washdown areas and accept the added weight and cost. When specifying 2B, also lock segment 3 to 3A (Housing B); do not combine it with 3B (GX one-piece aluminium) or with the RM remote-mount option. For natural gas service, verify the relevant approvals and seal materials separately.

Selection guide: The sequence is: set protocol and approvals, then housing material and type, then pneumatic action and diagnostics. The key constraints of 2B stainless are Housing B only, fluorosilicone as standard and no RM; these follow a different logic from the XT extreme-temperature option on 2A aluminium and must not be interchanged.

Common models: DVC6200H (HART) + 2B, DVC6200F (FF) + 2B, DVC6200P (PROFIBUS PA) + 2B, and DVC6200-SIS + 2B (stainless SIS version).

If you are undecided between aluminium and stainless housing, or want to check whether a nameplate 2A / 2B entry matches the order code, please contact us. We can review the housing material segment against the medium, site corrosion class and mounting arrangement.

Orders & Inquiries

Baoman Industrial Technology (Chengdu) Co., Ltd
Tel: +86 028-60220547 | Email: info@bit-cd.com
Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China

The information above is not guaranteed to remain valid at all times. Subsequent changes will not be notified separately. Please confirm the latest information at the time of inquiry.