Home » Service & Support » Technical Documentation
Common Positioner Brands - Spare Parts List Comparison
Release time:2026-11-22 09:38:23 | Views:

Spare-parts management for positioners and actuators is about matching the official spare-parts list by brand, model and nameplate data, not swapping parts across brands by appearance. Consumable categories are similar across brands: diaphragms, springs, seals, feedback and sensor assemblies, electrical modules, filters and coils, but part-number systems are completely different. This article compares spare-parts categories by brand and lists the official list sources that could be verified, with an actuator-side example. Any part number that could not be verified is marked "subject to the official spare-parts list / nameplate" and is never invented.

I. Subject Positioning and Spare-Parts Management Principles

ItemDescription
SubjectSpare-parts list comparison for common positioner brands
GoalLocate consumables quickly by brand / model / nameplate data and avoid mismatches and waiting time
CategoriesConsumables (diaphragm, seals, filters), maintenance parts (springs, fasteners), functional parts (feedback rod, sensor, electrical module), main body parts
Verification basisOfficial spare-parts list / exploded view, order number, tag number, model and nameplate data
Red linesElectrical parts for Ex ia intrinsic safety and Ex d flameproof enclosures are not interchangeable; part numbers for similar models cannot be copied; if unknown, write "please consult for confirmation"
Data basisPart numbers are listed only where seen in official lists; everything else is subject to the official spare-parts list / nameplate

Before ordering spares, provide the instrument tag number, complete model code, serial or order number, nameplate data, explosion-protection approval and installation environment. The generic words "positioner diaphragm" cannot guarantee the correct part number.

Management principles come from general requirements in official spare-parts lists / installation manuals. Specific part numbers are subject to the official spare-parts list / nameplate.

Digital positioner appearance
Fisher DVC6200 digital positioner, spare-parts comparison appearance reference, not the actual model; parameters subject to official samples

II. General Consumable Categories in Positioners

CategoryTypical partsNotes
Pneumatic consumablesDiaphragm, O-rings, radial shaft seal, wiper ring, dry / sliding bearingAging and wear appear as increased air consumption and position drift
Feedback / sensing partsFeedback rod, feedback spring, position sensor / potentiometer, non-contacting sensor NCSDifferent travels and mounting styles require different assemblies
Electrical / electronic partsI/P converter, piezo valve, terminal board, display / keypad module, communication moduleElectrical parts for hazardous-area versions are not interchangeable with non-hazardous versions
Air-path accessoriesFilter element (hydrophobic / dust), silencer, air connector, restriction orificePoor air quality blocks filters and orifices first
Indication / switching partsMechanical position indicator, proximity switch, microswitch, limit-switch assemblyMust be compatible with the mechanical indicator and approval version
Mounting partsMounting bracket, feedback-rod linkage, NAMUR / VDI-VDE 3845 adapter kitsSelected by actuator interface, not by brand habit

Build a spares list in layers: consumables first, then functional parts and finally main body parts. Keep diaphragms, seals and filters on site, stock a small number of functional parts for in-service models, and order main body parts as needed to avoid tied-up capital.

Categories compiled from the general structure of official spare-parts lists / manuals for SAMSON, Flowserve, Fisher, ABB and Siemens. Specific part numbers are subject to the official lists.

III. Spare Parts by Brand

Brand / modelCommon spare categoriesOfficial list / manual sourceNotes
Fisher DVC6000 / DVC6200 (Emerson)Feedback rods and mounting kits, diaphragm / seals, I/P and piezo-valve assemblies, terminal / display assembliesEmerson / Fisher official spare-parts lists and installation manualsDVC6200H/F/P/SIS versions differ greatly; verify by complete model. No part numbers are invented here
ABB TZIDC (V18345)Feedback modules (analog / digital), mechanical position indicator, proximity switch SJ2-SN, microswitch module, I/P and three-way valve assembliesABB sample DS_TZIDC_ZH_I REV. I and official spare-parts listModular upgrade design; segment 7 mechanical kits have exclusions with approvals / indicators, so verify by code
Siemens SIPART PS2 (6DR5)Piezo valve module, NCS sensor, DIO / AOM / AIM modules, ILS / MLS switches, pressure gauge and silencer, Bluetooth kitSiemens selection-rules manual and function-module order-number tables (6DR4004 series)6DR52XX is discontinued and 6DR51XX is current; flameproof and non-flameproof accessories are not interchangeable
SAMSON 3730 / 3731 seriesFeedback rods, sensors, pressure-monitoring modules, limit / solenoid options, housing and connection partsSAMSON data sheets T 8384-x / T 8387-x and official spare-parts lists3730-6 has pressure monitoring and 3731 is flameproof; codes cannot be copied between models
Flowserve Logix 3400MDHydrophobic filter element, O-ring, spool-valve cover assembly, spool-valve shroudOfficial manual FCD LGENIM3404-10 (3/22)Filter replacement procedure in manual section 8.5 and Figure 18
Masoneilan / Neles digital positionersFeedback rods, position sensors, electrical interface modules, sealsOfficial spare-parts lists of each brandBrand ownership: Masoneilan belongs to Baker Hughes; Neles belongs to Valmet (formerly Metso)

This table only builds the spare-category framework and provides no part numbers that have not been confirmed in official lists. Modules, cables and connectors that look similar across brands are not interchangeable, especially electrical parts involving intrinsic-safety or flameproof approvals.

Source: ABB DS_TZIDC_ZH_I REV. I, Siemens SIPART PS2 selection manual, Flowserve Logix 3400MD manual FCD LGENIM3404-10, SAMSON T 8384-x / T 8387-x. Unlisted part numbers are subject to the official spare-parts list / nameplate.

IV. Actuator-Side Spare Example (SAMSON 3271 / 3277)

Part no.NameCategory
4DiaphragmConsumable (core)
5Diaphragm plateConsumable
10 / 11 / 12Spring (external / internal)Maintenance part (setting element)
7 / 50Actuator stemMaintenance part
40 / 76Radial shaft sealConsumable
41 / 49Wiper ringConsumable
42 / 77Dry bearing / sliding bearingMaintenance part
6 / 8 / 19Hose clamp, ring nut, compressor on the hose clampMaintenance part

Springs are preloaded parts and stored energy must be released before disassembly (see EB 8051 chapter 11 safety notes). The complete part numbers 1 to 106 and exploded view are in EL 8310-6 EN. This list corresponds to SAMSON 3271 / 3277 pneumatic actuators and must not be copied to other brands or models.

Source: SAMSON EL 8310-6 EN (Edition Aug 2020) spare-parts list and EB 8051 safety notes. Part numbers are subject to the official exploded view / spare-parts list.

V. Spare Identification and Ordering Points

ItemPoint
Nameplate dataProvide complete model code, order / serial number, tag number and nameplate data
Approval versionElectrical parts for Ex ia intrinsic safety and Ex d flameproof enclosures are strictly distinct; write "please consult for confirmation" if unknown
Similar modelsPart numbers cannot be copied among DVC6200H/F/P/SIS, 3730-0/1/2/4/6, SVI3 and SVI-FF
Safe handlingRelease stored energy before handling preloaded springs; isolate and depressurize the air supply
Quality checkVerify filter / seal material and temperature rating; verify approval labels on electrical parts
Stock strategyKeep consumables on site, stock small numbers of functional parts and order main parts as needed

Special reminder: associated equipment such as safety barriers and isolators in an intrinsically safe loop is not part of the positioner's own spares and must be confirmed separately by loop design. Damaged flameproof sealing faces must not be machined and repaired on site; follow the manufacturer's requirements.

Based on general requirements in official installation / maintenance manuals. Specific items are subject to the official manual / nameplate.

VI. Selection Guide and Common Practice

Selection guide: The sequence is "confirm brand and complete model, confirm approval version and mounting interface, locate the part number in the official list, check nameplate and order number, then confirm safe-handling requirements". Red lines: 1. do not swap parts across brands by appearance; 2. Ex ia intrinsic safety is not Ex d flameproof enclosure and electrical parts must not be mixed; 3. part numbers for similar models cannot be copied; 4. stored energy must be released before handling preloaded springs; 5. unverified part numbers are marked "subject to the official spare-parts list / nameplate" and never invented.

Common practice: Maintain a "tag - model - part number - quantity" ledger, keep diaphragms, O-rings, filters and feedback-rod linkages on site, confirm replacement models and spare availability early for discontinued series such as SIPART PS2 6DR52XX, and check package labels and approval marks on receipt before booking parts into stock.

If you need to verify a positioner spare-part number, or are unsure whether electrical parts for intrinsic-safety and flameproof versions are interchangeable, feel free to send us the complete model, nameplate and tag data. We can check each item against the official spare-parts list and avoid wrong parts and waiting time.

Orders & Inquiries

Baoman Industrial Technology (Chengdu) Co., Ltd
Tel: +86 028-60220547 | Email: info@bit-cd.com
Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China

The information above is not guaranteed to remain valid at all times. Subsequent changes will not be notified separately. Please confirm the latest information at the time of inquiry.