Home » Service & Support » Technical Documentation
GO Switch Series Models - Technical Data & Selection (71/75/80/81)
Release time:2026-11-22 09:38:23 | Views:

GO Switch is an Emerson brand of integrated proximity sensor plus limit switch (rodless limit switch) using non-contact detection of a permanent-magnet or ferrous target with sealed dry-contact output. It needs no operating power, resists electrical noise and RFI, and operates from -50 C to +204 C and down to 7010 m underwater. This article separates the 10 series (11/21/31/81), 70 series (71/75 etc.), 35 series and specialty products, with technical data, order codes and selection points.

I. Product Positioning

ItemDescription
BrandGO Switch (an Emerson brand; often paired with TOPWORX switch boxes)
Product typeIntegrated proximity sensor plus limit switch (rodless limit switch) with sealed dry-contact output
DetectionNon-contact detection of permanent-magnet or ferrous targets; target magnets available to extend sensing range
Common featuresNo operating power; flexible AC/DC and NO/NC wiring; series or parallel connection; all-metal housing with environmental sealing compound
Environmental capability-50 to +204 C (high-temperature option); submersible to 7010 m; resistant to vibration and RFI
SourceGO Switch product brochure, Chinese edition (brochure-go-switch-product-chinese, 20 pages)

GO Switch belongs to Emerson and, although in the same group as TOPWORX, is a distinct product line: the 35 series is commonly used as built-in position feedback inside TOPWORX D/T series switch boxes.

Source: GO Switch product brochure, Chinese edition; TopWorx discrete valve controller product manual (TOPWORX.pdf).

Limit switch feedback device illustration
Limit switch feedback device illustration, not an actual GO Switch; for illustration only, not the actual model; parameters subject to the official data sheet

II. Series Overview and Quick Selection

SeriesTypical modelsSensing typeFeatures
10 series11 / 21 / 31 / 81Side sensing (11/21), end sensing (31/81)Replaces conventional mechanical limit switches; 6-10 mm sensing distance; highest switch rating (SPDT 10 A/120 VAC)
70 series71-77, 7G / 7H / 7I / 7L / 7APrecision end sensingAll stainless steel; corrosion resistant; up to 10000 psi; worldwide hazardous-area approvals
35 series35 SPDT / DPDTEnd sensingValve-monitoring dedicated, sealed contacts; 4 A/120 VAC, 3 A/24 VDC
Specialty sensorsStroke-To-GO / submersible / HiTemp / 7A / nuclearVariousCylinder end-of-stroke, 7010 m underwater, 204 C high temperature, pneumatic logic valves, etc.
ApplicationRecommended model
Mechanical limit replacement, long range, vibration11 (3/8-inch long range) / 21 (side) / 31 (end 1/4-inch) / 81 (DPDT end)
Precise position detection71 (0.040-inch) / 72, 73 (0.100-inch) / 74, 75 (long thread) / 76 / 77 (long body)
DPDT required81 (10 series), 7G / 7H / 7I (70 series)
LED status indication7L (BriteLite LED, 316 stainless, -40 to 71 C)
Pneumatic logic control7A (3-port P-A-E, 3.5 SCFM, max 60 psi)
Built-in feedback in switch boxes (SOV option)35 series (sealed SPDT / DPDT)

Source: GO Switch product brochure, Chinese edition (series overview and quick selection guide 2.1-2.2).

III. 10 Series (11/21/31/81) Data and Coding

ModelContactSwitch ratingSensing distanceDirectionTemperatureHousing
11SPDT gold-plated5 A/240 VAC, 10 A/120 VAC, 3 A/24 VDC3/8-inch (10 mm); extended 9/16-inch (14 mm)Side-50 to 105 C (high-temp option -50 to 176 C)Brass (matte black / corrosion coating) or 304 stainless
21SPDT gold-plated5 A/240 VAC, 10 A/120 VAC, 3 A/24 VDC3/8-inch (10 mm)Side-50 to 105 CBrass or 304 stainless
31SPDT gold-plated3 A/240 VAC, 6 A/120 VAC, 2 A/24 VDC1/4-inch (6 mm)End-50 to 105 CBrass or 304 stainless
81DPDT gold-plated5 A/240 VAC, 10 A/120 VAC, 3 A/24 VDC1/4-inch (6 mm)End-50 to 105 CBrass or 304 stainless

The 10 series order code is assembled as model / contact form / sensing range / exit position / housing material / termination / approval. Contact: 1=SPDT, 2=DPDT (81 only), 3=SPDT latching (11/21 only); sensing range: 0=1/4-inch end (81 only), 1=standard 3/8-inch side (11/21), 2=extended 9/16-inch side (11 only), 7=precision 1/4-inch side; approval: 4=CSA/FM Class I Div 1, 9=ATEX/IECEx Zone 1 Ex d IIC (70 series) and others, all subject to the official manual.

Source: GO Switch product brochure, Chinese edition (10 series data table 2.3 and order code 2.3.1).

IV. 70 Series (71/75 etc.) Data and Coding

ModelContactSwitch ratingSensing distanceBody / threadApproval
71SPDT (palladium)2 A/240 VAC, 4 A/120 VAC, 3 A/24 VDC0.040-inch (1 mm)3/8-inch straightCSA / UL
72/73SPDTPer manual0.100-inch (73)5/8-inch diameterCSA / UL etc.
75SPDTPer manualStandard 0.100-inchLong threadWorldwide hazardous-area approvals
7G/7H/7IDPDTPer manual0.090-inchStainless steelATEX / IECEx / CSA etc.
7LSPDT plus LEDPer manual0.100-inch316 stainless-40 to 71 C
7APneumatic logic3-port P-A-ENot applicable3.5 SCFM, max 60 psiPneumatic logic valve

Common 70 series features: all stainless steel (303/316), flexible AC/DC and NO/NC wiring, dry contact, intrinsic safety, end sensing; options include high temperature -50 to +204 C, pressure 2000/3500/5000/10000 psi, submersible connectors, quick-disconnects, sealing and imperial / metric threads (M suffix such as 71M). The order code has 7 segments: model (71-77, 7G/7H/7I/7L/7A) / contact (1=SPDT, 2=DPDT only 7G/7H) / sensing range (3=standard 0.100-inch, 4=0.072-inch, 5=0.060-inch, 6=0.040-inch only 71/72) / exit position / housing (2=303 2000 psi, 3=303 5000 psi, 4=303 10000 psi, 6=316 2000 psi) / termination / approval (9=Zone 1 Ex d IIC, F/G/H=Zone 0 Ex ia IIC T6/T4/T3, N=NEPSI Ex d IIC).

Source: GO Switch product brochure, Chinese edition (70 series data 2.4.1 and order code 2.4.2).

V. 35 Series, Notes on the 80 Series and Selection Red Lines

ItemDescription
35 series (valve monitoring)SPDT / DPDT, sealed contacts 4 A/120 VAC, 3 A/24 VDC; SPDT in matte-black coated brass housing, DPDT in stainless housing; used as built-in feedback option in TOPWORX D/T switch boxes
Model 81Belongs to the 10 series DPDT end-sensing type, gold-plated contacts, 5 A/240 VAC, 10 A/120 VAC, 3 A/24 VDC, 1/4-inch (6 mm) sensing
80 seriesThe official manual excerpts available in this review do not list digit-by-digit data or coding for an 80 series; refer to the official manual / nameplate or consult for confirmation, without inventing parameters
Ex ia is NOT Ex dIn the 70 series, F/G/H are Zone 0 Ex ia IIC T6/T4/T3 while 9/N are Ex d IIC; their certification and wiring requirements differ
Brand ownershipGO Switch belongs to Emerson, same group as TOPWORX but a different product line

Selection path: define the target (ferrous metal / permanent magnet) and sensing distance, then output form (SPDT / DPDT, NO/NC) and load current, then environment (temperature, pressure, submersible, corrosion), then hazardous-area certification (Zone 0 Ex ia / Zone 1 Ex d), and finally assemble the series order code with compatibility checks.

Source: GO Switch product brochure, Chinese edition (35 series 2.5 and 10/70 series codes 2.3/2.4); specific certifications and dimensions subject to the official manual.

VI. Selection Guide and Common Models

Selection guide: Quick mapping by application: replacing mechanical limits with long range / high rating means the 10 series 11/21/31/81; high precision, small travel, high pressure or hazardous areas mean the 70 series such as 71/75; built-in valve feedback inside TOPWORX switch boxes means the 35 series. Model 81 is the 10 series DPDT type and 75 is the 70 series long-thread type. No official digit-by-digit data for an 80 series was found in this review; refer to the official manual / nameplate or consult for confirmation. Ex ia and Ex d are strictly distinguished.

Common models: 11 / 21 / 31 (SPDT, 10 series), 81 (DPDT, 10 series), 71 / 72 / 73 / 75 / 76 / 77 and 7G / 7H / 7I / 7L / 7A (70 series), 35 SPDT / DPDT (valve monitoring), plus specialty products such as Stroke-To-GO, submersible, HiTemp and the 7A pneumatic logic type.

If you are selecting a GO Switch for mechanical limit replacement or valve feedback, or want to confirm the data and approvals of the 71/75/81, please feel free to contact us. We can check the model and order code against the target, load and hazardous-area certification; parameters not found are subject to the official manual.

Orders & Inquiries

Baoman Industrial Technology (Chengdu) Co., Ltd
Tel: +86 028-60220547 | Email: info@bit-cd.com
Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China

The information above is not guaranteed to remain valid at all times. Subsequent changes will not be notified separately. Please confirm the latest information at the time of inquiry.