| TOPWORX TVA / TVP Valve Position Indicators - Technical Data & Selection | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Release time:2026-11-22 09:38:23 | Views: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
TOPWORX (an Emerson brand) T series are compact direct-mount valve position feedback switch boxes that mount on ISO / NAMUR actuators without a bracket and use TwistSet stepless cam adjustment. The TVP has a tropical aluminum housing and the TVA an engineering-resin (composite) housing; their explosion protection capabilities differ, and both must be distinguished from the TXP / TXS and the D series DXP. This article covers TVA / TVP data, the 12-digit order code and selection points. I. Product Positioning
Red line: TVA / TVP, TXP / TXS and the D series DXP are different series with non-interchangeable order codes; explosion protection is determined by digit 3 area classification, not by the housing series letter. Source: TopWorx official discrete valve controller product manual (TOPWORX.pdf). Brand ownership: TOPWORX belongs to Emerson.
II. Housing Material, Ex and Ingress Data
T series features: direct mount (no bracket, ISO / NAMUR actuators), TwistSet stepless cam adjustment, compact design, extreme environments -60 to 80 C, stainless shaft and fasteners (NAMUR shaft), up to 4 conduit entries. Because of its resin housing, the TVA is limited to area classification W or 0 and has no Ex d flameproof capability. Source: TopWorx official discrete valve controller product manual (T series housing material and Ex / ingress table 1.4.1). III. 12-Digit Order Code StructureFor TVA / TVP, the order code is built over 12 digit positions (examples: TXS-ASCGNPM1A1, TVP-M21GNPB1A1).
Source: TopWorx official discrete valve controller product manual (T series order code structure 1.4.3). Digit count and meanings are subject to the official ordering manual. IV. Area Classification and Ex ia is NOT Ex d
Ex ia intrinsic safety and Ex d flameproof enclosure are different forms uniquely determined by digit 3 and must not be confused: 0 means Ex ia, 1 / C means Ex d, 2 means Ex nA, and G / W are non-hazardous. The TVA is limited to W or 0; where flameproof enclosure is needed, select the TVP with digit 3 set to 1 or C, or the D series DXP, and verify the specific certificate. Where unavailable, write "please consult for confirmation". Source: TopWorx official discrete valve controller product manual (T series area classification table 1.4.2). Ex forms are strictly distinguished. V. Sensors, Bus Options and Selection Guide
Selection sequence: define mounting (T series direct on ISO / NAMUR, no bracket), define digit 3 area classification (0 Ex ia / 1, C Ex d / 2 Ex nA / G / W), define signal type and switch count, choose display, shaft, conduit and O-ring, choose solenoid / spool / Cv, select area certificate, then verify compatibility. Note that the TVA is limited to W or 0. Source: TopWorx official discrete valve controller product manual (bus / sensor table 1.4.2 and six selection factors 1.2). VI. Selection Guide and Common ModelsSelection guide: The core difference between the TVA and TVP lies in housing material and explosion protection: the TVA is engineering resin, limited to W or 0 (intrinsic safety) with no Ex d capability; the TVP is tropical aluminum and can be 0 (Ex ia), 1 / C (Ex d), 2 (Ex nA), G or W. Define mounting first (T series direct on ISO / NAMUR without bracket), then digit 3 area classification and sensor / signal type, and finally fill the 12-digit order code with compatibility checks. Common models: TVA (engineering resin, W / 0) and TVP (tropical aluminum, 0 / 1 / C / 2 / G / W); the same T family also includes the TXP (tropical aluminum) and TXS (316 stainless), while the TV series TVF / TVL / TVH and the D series DXP / DXR / DXS must be listed separately. If you are selecting a position indicator for bracket-free mounting, or want to confirm the Ex boundary between the TVA and TVP and their 12-digit order codes, please feel free to contact us. We can check the model and code against the mounting interface, area certification and feedback signal. Orders & InquiriesBaoman Industrial Technology (Chengdu) Co., LtdTel: +86 028-60220547 | Email: info@bit-cd.com Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China The information above is not guaranteed to remain valid at all times. Subsequent changes will not be notified separately. Please confirm the latest information at the time of inquiry. |

简体中文
ENGLISH
