Home » Service & Support » Technical Documentation
Fisher DVC6000 Series Positioners - Overview & Model Decoding (DVC6010/6020/6030
Release time:2026-11-22 09:38:23 | Views:

Fisher (an Emerson brand) FIELDVUE DVC6000 is an earlier generation of digital valve controllers, with common models DVC6010 (linear), DVC6020 (rotary), DVC6030 (double-acting) and their remote-mount versions. It differs substantially from the later DVC6200 in position feedback, housing and diagnostics. This article covers series composition, model identification, technical data and spare-part cross references for in-service maintenance and replacement.

I. Product Positioning

ItemDescription
BrandFisher (Emerson Process Management)
SeriesFIELDVUE DVC6000 digital valve controllers (DVC6010 / 6020 / 6030 and remote 6015 / 6025 / 6035)
Product typeElectro-pneumatic valve positioner / Digital Valve Controller
Input signal4-20 mA DC with HART overlay
Position feedbackMechanical feedback arm / travel sensor linked to the stem, unlike the linkage-less magnetic array of the DVC6200
ActionDVC6010/6020 single-acting direct; DVC6030 double-acting
Explosion protectionEx ia intrinsic safety or Ex d flameproof enclosure depending on model and certificate; verify nameplate
Main documentsFisher FIELDVUE DVC6000 series instruction manual; Fisher spare parts list (official part numbers)

The DVC6000 belongs to the earlier Fisher FIELDVUE platform. First confirm brand ownership as Emerson. Then distinguish it from the DVC6200: the DVC6000 uses a mechanical feedback arm for travel sensing, while the DVC6200 uses linkage-less non-contact Hall/magnetic array feedback. Their spare parts, mounting kits and order-code systems are not interchangeable.

Source: Fisher FIELDVUE DVC6000 series instruction manual; Fisher spare parts list (official part numbers). Brand ownership: Emerson belongs to Fisher. Ex forms are subject to nameplate and official certificates.

Fisher DVC6200 digital positioner
Fisher DVC6200 digital positioner, appearance reference only, not the actual model in this article; parameters subject to official data sheets

II. Series Model Identification

ModelActuatorActionFeedbackNotes
DVC6010Linear sliding-stem actuatorSingle-acting directMechanical armStandard linear version
DVC6015Linear remote mountSingle-actingRemote feedback unitBody and feedback separated
DVC6020Rotary actuatorSingle-actingMechanical armStandard rotary version
DVC6025Rotary remote mountSingle-actingRemote feedback unitLong / short feedback arm variants
DVC6030Double-acting actuatorDouble-actingMechanical armCommon AC double-acting configuration
DVC6035Double-acting remote mountDouble-actingRemote feedback unitRemote double-acting version

The trailing 0 versus 5 distinguishes local body mounting from remote mounting. Complete order codes and options must be checked against the ordering section of the official manual; digit-by-digit codes are not invented here.

Source: Fisher FIELDVUE DVC6000 series instruction manual and Fisher spare parts list. Remote mounting and feedback arm variants are subject to the official manual.

III. Core Technical Data and Construction

ItemDescription
ItemDescription / Value
Communication4-20 mA analog with HART digital overlay (HART revision per as-built configuration)
ConstructionAluminum housing, modular design; key components field-replaceable
Feedback sensingMechanical feedback arm driving a travel sensor; no DVC6200-style magnetic feedback array
Supply pressureSubject to official manual / nameplate; take the lower of instrument and actuator ratings
Travel rangeLinear and rotary ranges depend on mounting kit; refer to official travel table
Independent linearitySubject to official manual
Ingress protectionDepends on housing and approval options; refer to nameplate
Operating temperatureDepends on elastomer option; refer to official manual
DiagnosticsBasic diagnostics; ODV and PS are DVC6200 platform features and are not available on DVC6000

Instrument air must be clean, dry and oil-free; DVC series generally follow ISA 7.0.01 / ISO 8573-1 (see article 5 of this batch). The DVC6000 is primarily an in-service and spare-parts platform. For new advanced diagnostics or SIL loops, move to the DVC6200 / DVC6200 SIS platform rather than promising such functions on a DVC6000.

Source: Fisher FIELDVUE DVC6000 series instruction manual; air quality per ISA 7.0.01 / ISO 8573-1 clauses in Fisher DVC manuals. Unavailable parameters: subject to official manual / nameplate.

IV. Feedback Arms and Spare Parts Cross Reference

Part / ModelPart numberDescription
I/P converter kit (DVC6000)38B6041X152Standard I/P converter assembly
Travel sensor kit (DVC6010)GG09947X012Travel sensor with feedback arm
Travel sensor kit (DVC6015)GG09948X012Travel sensor with feedback arm
Travel sensor kit (DVC6020)GG09949X012Travel sensor with feedback arm
Travel sensor kit (DVC6025)GG09950X012Travel sensor with feedback arm
Remote magnet strip (DVC6015)49B7986X012Remote feedback unit magnet strip
Remote magnet strip (DVC6025)49B7987X012 / X022Remote, long / short arm
Remote magnet strip (DVC6035)49B7988X012 / X022Remote, standard / GX actuator
Cover kit (standard aluminum)38B9580X022Includes cover screws
Cover kit (stainless steel)38B9580X042Stainless version
Positioner DVC6020 (double-acting)48B9596X462As listed in the official parts table
Positioner DVC6030 (AC double-acting)48B9597X512As listed in the official parts table

Descriptions follow the official spare parts list. No separate pressure gauge part number is listed for DVC6000; order by range and unit from the official catalog. When replacing a feedback arm, select the pin position according to rated travel and verify against the official travel table to avoid configuration over-range.

Source: Fisher spare parts list (official part numbers). Part numbers and applicable models are subject to the latest Emerson parts manual.

V. Key Differences: DVC6000 vs DVC6200

DimensionDVC6000DVC6200
FeedbackMechanical arm + travel sensorLinkage-less non-contact Hall / magnetic array
HousingAluminumAluminum or stainless steel
ActionSingle-acting / double-acting (6030)Single-acting direct / reverse, double-acting
DiagnosticsBasic; no ODV / PS levelAC / HC / FD / AD / PD / ODV / PS levels
Partial stroke testNot supportedODV level (HART DVC6200H only) or SIS standard
Order codeNumeric model + fixed order codeLetter segment code (10 segments / 9 for SIS)
Remote mount15 / 25 / 35 remote versionsRM: DVC6205 + DVC6215
AvailabilityIn-service and spares mainlyCurrent HW2 hardware version

Red line: the DVC6200 ODV diagnostics level is valid only on the HART protocol version DVC6200H; the FF version DVC6200F and PROFIBUS PA version DVC6200P do not offer ODV. The PS level on DVC6200F is a different partial stroke test option and must not be confused with ODV. Never apply DVC6000 mechanical feedback spares to a DVC6200.

Source: Fisher FIELDVUE DVC6200 instruction manuals D103409X012 / D103605X012; DVC6000 series manual. Model distinctions are subject to official data.

VI. Selection Guide and Common Models

Selection guide: First determine whether the installed unit is a DVC6000 or DVC6200 by checking the feedback construction (mechanical arm present or not) and the order code format. Replace DVC6000 spares strictly by feedback arm / travel sensor part number and verify the pin position against rated travel. For explosion-protected units, verify the original certificate and the Ex ia / Ex d marking; they are not mutually substitutable. If online diagnostics, PST or SIL service is needed, migrate to DVC6200H (ODV) or DVC6200 SIS rather than making promises on a DVC6000. Order codes, approval options and ranges are subject to the official manual and nameplate.

Common models: DVC6010 (linear single-acting), DVC6020 (rotary single-acting), DVC6030 (double-acting), and remote versions DVC6015 / DVC6025 / DVC6035. Upgrade options include DVC6200H (HART), DVC6200F (FF), DVC6200P (PROFIBUS PA) and DVC6200 SIS.

If you are verifying a positioner model, spare part or diagnostics level, or want to confirm air purification and area approval requirements, please feel free to contact us. We can check the model and configuration together against your protocol, actuator interface and site approval conditions.

Orders & Inquiries

Baoman Industrial Technology (Chengdu) Co., Ltd
Tel: +86 028-60220547 | Email: info@bit-cd.com
Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China

The information above is not guaranteed to remain valid at all times. Subsequent changes will not be notified separately. Please confirm the latest information at the time of inquiry.