| Fisher Positioners - Air Supply Interfaces & Piping Accessories Selection List | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Release time:2026-11-21 13:41:01 | Views: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Reliable positioner operation begins with a clean, stable instrument air supply. The Fisher 67CFR is a direct-acting instrument supply filter regulator of the 67C series, delivering reduced-pressure air to positioners, converters and other instruments through a 1/4" NPT connection, 5 μm filtration and an internal relief valve. This article covers air supply connection specifications, filter regulator selection, a piping accessory checklist and matching points, and makes clear that the 67CFR connection is 1/4" NPT only, never 1/2". I. Product Positioning
The red line comes first: the 67CFR belongs to the 67C platform, with a 1/4" NPT connection only and main valve Cv 0.36; the 67DFR belongs to the 67D platform, with a 1/2" NPT connection and Cv 1.33. The two differ in size and flow capacity, their parameters must not be interchanged, and the 67CFR must never be written as "1/2 optional". Source: Fisher official technical manuals Form 5469 (67C series) and document 5858 (67D series); the Form 5469 number was verified online against the Emerson public manual. Parameters are subject to the official manual and nameplate / order.
II. Air Supply Connection Specifications
When paired with a positioner, the common outlet pressure ranges are 0-20 or 0-35 psig, chosen by the instrument's required supply pressure. The internal relief valve Cv is only 0.045, serving only very small seat leakage and not complete overpressure protection; if inlet pressure may exceed the downstream equipment rating, a separate overpressure / limiting device is required. Source: Fisher official technical manuals Form 5469 and 5858 (CN86 / CN87 / CN1800). The 67CFR is 1/4" NPT only and must not be written as 1/2 optional. III. Filter Regulator Selection Quick GuideSelection follows five steps: size and flow, material and service, outlet spring range, gauge or not, and special options.
Media compatibility: NBR standard for normal air / instrument air; FKM for high temperature / corrosive chemicals; silicone VMQ for low temperatures but incompatible with hydrocarbon gas, and the standard polyethylene element is prohibited for high-aromatic services. Common order numbers: 67CFR-224 (0-35, no gauge), 67CFR-226 (0-125), 67CFR-235 (0-125 with gauge); the complete code is subject to the official manual and nameplate / order. Source: Fisher official technical manuals Form 5469 and 5858 (CN86 selection quick guide). Digit-by-digit order differences are subject to the official catalog and nameplate / order, without assumption. IV. Piping Accessory ChecklistA typical piping run from the main air supply to the positioner requires the following accessories, item by item.
Source: Fisher official technical manuals Form 5469 / 5858 (CN86 matching accessories and spare parts tables). Tubing and fitting specifications are subject to site routing conditions and the official manual. V. Matching with Positioner Air PortsDifferent brands of positioner have different air supply connection specifications; refer to each official manual. The table below shows the checking aspects for common positioner air connections; confirm specific specifications where required.
The key to matching is consistency of connection size, pressure range and air cleanliness: the 67CFR outlet is 1/4" NPT; if the positioner air port differs, use compliant fittings and tubing to adapt, with specifications subject to both official manuals; where a model is unavailable, write "please consult for confirmation". Source: Fisher 67C/67D official manuals (5469 / 5858) and Emerson FIELDVUE DVC6200 official product selection data (D104363X012, obtained online); each positioner's air port specification is subject to its own official manual. VI. Selection Guide and Common ModelsSelection guide: 1. confirm the required size and flow: for a single instrument / low flow use the 67C platform 67CFR (1/4" NPT, Cv 0.36); for higher flow / multi-instrument headers use the 67D platform 67DFR (1/2" NPT, Cv 1.33); 2. choose the outlet spring range by instrument supply pressure (commonly 0-20 or 0-35 psig); 3. choose material by medium (aluminum / stainless); 4. select gauge, automatic drain, Smart Bleed check valve and other options as needed; 5. complete the set with fittings, tubing and a pressure gauge, keeping connection sizes consistent; 6. the 67CFR is 1/4" NPT only, never 1/2 optional; the internal relief valve is not complete overpressure protection and a separate device is required where limits may be exceeded; the complete order code is subject to the official manual and nameplate / order. Common models: 67CFR-224 (0-35, no gauge), 67CFR-226 (0-125), 67CFR-235 (0-125 with gauge), 67CFR-237 (0-60, incl. 67CF-1663-38512), 67CFR-239 (1/4 NPT, 0-125, with gauge, incl. 67CF-1663-38550); the same platform includes stainless 67CFSR, plus the 67D platform 67DFR / 67DFSR. Specific configurations are subject to the nameplate / order or official selection catalog. If you are arranging an air supply for a positioner, want to confirm the 67CFR connection, outlet range and gauge configuration, or want to verify tubing and fittings, please feel free to contact us. We can check the configuration together against your supply conditions and the positioner air port specification. Orders & InquiriesBaoman Industrial Technology (Chengdu) Co., LtdTel: +86 028-60220547 | Email: info@bit-cd.com Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China The information above is not guaranteed to remain valid at all times. Subsequent changes will not be notified separately. Please confirm the latest information at the time of inquiry. |

简体中文
ENGLISH
