Home » Service & Support » Technical Documentation
KOSO Butterfly Valves - Working Principle & Applications
Release time:2026-11-21 13:41:01 | Views:

KOSO (Kongso / Gongzhuang) is an independent valve and actuator brand, and its butterfly valves belong to the large-diameter control valve product line. A butterfly valve achieves shutoff and regulation by rotating its disc roughly 90 degrees about the stem: simple in structure, quick in opening/closing, and especially suited to large-diameter, low-differential-pressure services. This article covers its working principle, application scenarios and selection boundaries, and notes that the attached photo is for series appearance reference only.

I. Product Positioning

ItemDescription
BrandKOSO (independent brand)
Product typeButterfly valve (large-diameter control valve / shutoff valve)
Working principleThe disc rotates about the stem by roughly 90 degrees: at full close the disc is perpendicular to the flow path for shutoff; at full open it is parallel to the flow; intermediate positions allow throttling
Typical featuresCompact structure, light weight, quick opening/closing, low flow resistance; suited to large diameters and low differential pressure
ActuationCan be fitted with manual, electric or pneumatic (diaphragm / cylinder) actuators; see the official catalog
Models & dataSpecific KOSO butterfly valve models and data are subject to the official catalog; no values are assumed here
SourceKOSO official product catalog (product line list covering 200/300/400/500/600/700 series valves and EP800 positioners); Fisher official high-performance butterfly valve data (CN134 / CN136 / CN131, for principle and appearance reference only)

One point must be clear: KOSO and Fisher are two independent brands. The high-performance butterfly valve photo used here comes from the Fisher 8560 series (CN134) and serves only to illustrate the typical appearance and the 90-degree rotary shutoff principle of a butterfly valve; it does not represent an actual KOSO butterfly valve. Specific KOSO butterfly valve models, sizes and pressure classes are subject to the KOSO official catalog.

Source: KOSO official product catalog (200 series 210E / 220E / 210C / 220C / 230C valve list), Fisher official butterfly valve data (CN134 / CN136 / CN131). Parameters are subject to the latest original catalog.

KOSO butterfly valve series appearance reference
KOSO butterfly valve series appearance reference, not the actual model, subject to the official catalog

II. Butterfly Valve Working Principle

ItemDescription
Core motionThe stem drives the disc to rotate inside the body over a stroke of about 90 degrees (quarter turn)
Full-closed positionThe disc plane is perpendicular to the pipe axis, its periphery contacting the seat to form shutoff
Full-open positionThe disc plane is parallel to the flow, medium passing on both sides with relatively low resistance
Throttling rangePositions between closed and open allow continuous throttling, with approximately linear or equal-percentage characteristics depending on seat and disc design
Sealing methodSoft seat (elastomer) enables tight shutoff; metal seats suit higher temperature and pressure, with shutoff classes per FCI 70-2 and other standards
Eccentric designHigh-performance butterfly valves use an eccentrically mounted disc that lifts off the seat quickly on opening, reducing wear and operating torque

Taking the comparable Fisher 8560 high-performance butterfly valve as an example, its data explicitly state that the "eccentrically mounted disc provides near-linear flow characteristics; rotating the disc through 90 degrees suits on/off or throttling control" (CN134). This describes the general butterfly valve principle, but the 8560 specifications belong to Fisher and are not transferred to KOSO models.

Source: Fisher official high-performance butterfly valve data (CN134 / CN136 / CN131) for the general principle; KOSO butterfly valve details are subject to the KOSO official catalog.

III. Position in the KOSO Product Line

The KOSO catalog groups products by function. Butterfly valves belong to the "valves" category and form a complete control loop together with positioners, filter regulators, lock-up valves and actuators. The table below summarizes the official product line list (see source).

CategoryListed series / models (excerpt)Relation to butterfly valves
Valves200 series 210E / 220E / 210C / 220C / 230C; 300 series 301K / 300W / 300T / 300L / 300R; 400 series 400H; 500, 600, 700 seriesCategory to which butterfly valves belong (confirm the exact butterfly model in the official catalog)
PositionersEP800 series: linear EPA801 / EPA811 / EPA821, EPC801 / EPC811 / EPC821; rotary EPA804 / EPA814 / EPA824, EPC804 / EPC814 / EPC824Rotary positioners can be paired with butterfly valve pneumatic actuators
Filter regulatorsPRF308 / PRF408 / PFR304 / PRF403 / PRF404Supply clean, stable instrument air to pneumatic actuators
Lock-up valvesCL420 / CL420S / CL523 / CL523HHold / lock position on air failure with pneumatic actuators
Diaphragm actuators5200LA / 5200RA / 5300LADrive linear or rotary valves
Cylinder actuators6100LA / 6200LA / 6300LA / 6300LB / 6300RC / 7300RB, etc.Common configuration for driving rotary valves such as butterfly valves

Do not infer a butterfly valve model merely from a "similar series number". In the list above, 210E is an eccentric rotary control valve with a different purpose from the other series. The exact butterfly series, size and connection type must be checked in the KOSO official catalog or generated by the ordering tool.

Source: KOSO official product catalog product line list (series / models recorded in CN409). Complete models and parameters are subject to the official catalog and the nameplate / order.

IV. Application Scenarios and Suitability

Scenario / serviceSuitabilityNotes
Large-diameter pipelinesSuitableShort face-to-face length and low weight save space and cost at large diameters versus ball or gate valves
Low differential pressure, low pressure classSuitableReliable opening/closing and throttling at low differential pressure; high differential pressure requires specific calculation
Water, air, gases, low-pressure steamCommonMedia compatibility depends on seat and body materials; check against the official catalog
On/off controlSuitable90-degree quarter turn, quick action, often with solenoid valve and limit switch
Throttling controlUsableIntermediate positions can be modulated, but quality depends on flow characteristics and actuator positioning accuracy; a positioner is required
Particulate / erosive mediaUse careDisc and seat are prone to wear; confirm materials and eccentric design, or consult for confirmation

Source: General butterfly valve engineering practice and the KOSO official product catalog (product category description). Special media and high differential pressure services are subject to the official catalog and confirmation at the time of inquiry.

V. Appearance and Principle Reference (Fisher High-Performance Butterfly Valve, Comparison Only)

To help understand the typical structure of high-performance butterfly valves, the following lists public specifications of comparable Fisher 8560 / 8580 / 8532 butterfly valves. These figures describe the common range of the "high-performance butterfly valve" category only; they are not KOSO models and are not a basis for KOSO ordering.

Model (Fisher, reference only)Structural featuresSize / standard (excerpt)
8560 high-performance butterfly valve (CN134)Eccentrically mounted disc, near-linear flow characteristics, 90-degree rotation for on/off or throttling; optional ENVIRO-SEAL packingNPS 3 / 4 / 6 / 8 / 10 / 12; ASME B16.34; shutoff class IV / VI (FCI 70-2)
8580 butterfly valve (CN136)Metal and soft seals both have pressure-assisted sealing; action mode convertible; conductive packing for hazardous areasNPS 2 / 3 / 4 / 6 / 8 / 10 / 12; PN / ASME
8532 butterfly valve (CN131)Pressure-assisted sealing design, blowout-proof gland, self-centering bodyNPS 14 / 16 / 18 / 20 / 24; ASME

Source: Fisher official butterfly valve data (CN134 / CN136 / CN131). The above are Fisher parameters for principle and appearance reference only and are not applied to KOSO butterfly valves.

VI. Selection Guide and Common Models

Selection guide: KOSO butterfly valve selection is recommended in this order: 1. define medium, temperature, size and differential pressure and confirm it falls in the typical "large diameter, low differential pressure" range; 2. define on/off or throttling duty, using a rotary positioner (e.g. the EP800 rotary series) for throttling to ensure positioning accuracy; 3. define pneumatic / electric / manual actuation, with pneumatic setups further paired with a filter regulator (e.g. PRF series) and, as needed, a lock-up valve (e.g. CL series), solenoid valve and limit switch; 4. verify seat material and shutoff class requirements; 5. confirm the exact butterfly model, size, pressure class and connection type in the KOSO official catalog, without assuming values from the appearance photo or similar series numbers.

Common models: The KOSO catalog lists the 200 series (210E / 220E / 210C / 220C / 230C), 300 series, 400H, 500 / 600 / 700 series valves, paired with EP800 positioners, PRF / PFR filter regulators, CL lock-up valves and 5200 / 6100 series actuators; the exact butterfly valve series and models are subject to the KOSO official catalog.

If you are selecting a butterfly valve for a large-diameter line, or want to confirm the specific KOSO butterfly series, size and paired actuator, please feel free to contact us. We can check the model and configuration together against your medium, differential pressure and actuation method.

Orders & Inquiries

Baoman Industrial Technology (Chengdu) Co., Ltd
Tel: +86 028-60220547 | Email: info@bit-cd.com
Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China

The information above is not guaranteed to remain valid at all times. Subsequent changes will not be notified separately. Please confirm the latest information at the time of inquiry.