Home » Service & Support » Technical Documentation
ABB Valve Positioners - Technical Data & Selection
Release time:2026-11-21 13:41:01 | Views:

The ABB TZIDC series (order code V18345) is a smart electro-pneumatic positioner with an LCD and local operator panel, supporting 4-20 mA two-wire, HART communication and multiple Ex options, with mounting compatible with NAMUR / IEC 534 and VDI/VDE 3845. This article organizes its technical data, digit-by-digit order code, Ex protection and selection points based on ABB official operating instructions, ordering data and the Chinese data sheet. No in-house ABB positioner material is available; all online-sourced data is annotated with sources in the text, and parameters are subject to the official ABB catalog.

I. Product Positioning

ItemDescription
BrandABB (independent brand)
SeriesTZIDC / TZIDC-110 / TZIDC-120 smart electro-pneumatic positioners
Basic order codeV18345-x0x2x2xx0x (x denotes minor mechanical variations or options)
Product typeSmart electro-pneumatic positioner with indicator and operator panel, configurable
Input signal4-20 mA two-wire; optional LKS adapter and HART FSK module
Output pressureMax. 90 psi
MountingLinear per DIN/IEC 534 / NAMUR; rotary per VDI/VDE 3845, extended rotation up to 270 degrees available
Ingress protectionIP65 (NEMA 4X), varnished aluminum housing
Source documentsABB TZIDC operating instructions 3KXE341007R4201-42/18-84-EN, ordering data 10_18-022-EN, Chinese data sheet DS_TZIDC_ZH_I

The TZIDC compares the setpoint with position feedback in a microprocessor and outputs pneumatic pressure to drive the actuator. Its local LCD and pushbuttons handle commissioning and configuration, and the ABB local communication interface (LCI) can connect a programming device outside hazardous areas. The TZIDC-110 / TZIDC-120 are versions oriented to intrinsic safety and specific approvals; verify them digit by digit against the order code.

Source: ABB official documents 3KXE341007R4201-42/18-84-EN, 10_18-022-EN-A-07_2007 and DS_TZIDC_ZH_I. Parameters are subject to the latest official ABB catalog.

Digital valve positioner appearance reference
Digital valve positioner appearance reference only, not an actual ABB unit; refer to the official catalog

II. Series Versions and Communication Options

The following data was obtained via online search. Sources: ABB official TZIDC ordering data 10_18-022-EN (https://library.e.abb.com/public/1b4989c6fa0a198fc1257b0c005493dd/10_18-022-EN-A-07_2007.pdf); ABB official TZIDC operating instructions 3KXE341007R4201 (https://library.e.abb.com/public/60ef1a03711a8025c1257a1e0032fa7a/3KXE341007R4201-42_18_84_EN_C_06_2012.pdf).

VersionInput / communicationFeatureTypical service
TZIDC (V18345-0...)4-20 mA two-wire; optional LKS adapter; HART via an added FSK moduleLCD and operator panel, configurable, analog / digital position feedback availableConventional and HART smart loops
TZIDC-110Intrinsically safe, input rated 30 V DC, 4-20 mAATEX II 2 G Ex ia IIC T6 / T4 Gb, Ex ib / Ex ic variantsIntrinsically safe loops in hazardous areas
TZIDC-120Intrinsically safe / flameproof related versions, verify per certificateExact Ex marking per official operating instructions and certificatesHazardous areas needing item-by-item approval checks
Single / double actingOutput and safe position configurableFail Safe and Fail Freeze distinguished by order codeSelected by process safety requirements

Communication capability is determined by the "input / communication port" group of the order code: the basic type has only 4-20 mA two-wire, an LKS adapter adds the local interface, and only an added FSK module enables HART. Do not assume a unit has HART merely from the V18345 prefix; check the complete order code.

The above data was obtained via online search. Sources: https://library.e.abb.com/public/1b4989c6fa0a198fc1257b0c005493dd/10_18-022-EN-A-07_2007.pdf, https://library.e.abb.com/public/60ef1a03711a8025c1257a1e0032fa7a/3KXE341007R4201-42_18_84_EN_C_06_2012.pdf. Ex markings are subject to official certificates.

III. Core Technical Data

The following data was obtained via online search. Sources: ABB official TZIDC operating instructions 3KXE341007R4201 and Chinese data sheet DS_TZIDC_ZH_I.

ParameterDescription
Input rating30 V DC; 4-20 mA (two-wire, max. 21.5 mA)
Output pressureMax. 90 psi
Signal loop (terminals 11 / 12)U = 9.7 V DC, I = 4-20 mA (max. 21.5 mA)
Contact input (terminals 81 / 82)U = 12-24 V DC, I = 4 mA
Switch output (terminals 83 / 84)U = 11 V DC
Local communication interface (LCI)Only outside hazardous areas, via an ABB LCI adapter to a programming device (Um no more than 30 V DC)
Feedback optionsProximity switch SJ2-SN (Limit1 terminals 51/52, Limit2 terminals 41/42, U = 8.2 V DC, Ri approx. 1 kohm); digital feedback plug-in U = 5-11 V DC; analog feedback plug-in U = 10-30 V DC, I = 4-20 mA (max. 21.5 mA)
Housing and protectionVarnished die-cast aluminum, IP65 / NEMA 4X
Ambient temperatureDepends on approval options; maximum ambient up to 85 C (see temperature code in official instructions)
Functional safetySIL 2 declaration of conformity available (option CS2, limited by Ex form)

For intrinsically safe input circuits, note the entity parameters: for example terminals 11/12 have Vmax = 30 V, Imax = 104 mA, Ci = 6.6 nF and Li = 0 uH, which must match the associated apparatus. The LCI may only be used outside hazardous areas; never connect the local communication port directly inside a hazardous area during commissioning.

The above data was obtained via online search. Sources: https://library.e.abb.com/public/60ef1a03711a8025c1257a1e0032fa7a/3KXE341007R4201-42_18_84_EN_C_06_2012.pdf, https://cn.library.e.abb.com/public/e4b0677698b443bd94cac80500b9cc4a/DS_TZIDC_ZH_I.pdf. Entity parameters and temperature codes are subject to official certificates.

IV. Order Code Structure (V18345)

The following data was obtained via online search. Source: ABB official TZIDC ordering data 10_18-022-EN (https://library.e.abb.com/public/1b4989c6fa0a198fc1257b0c005493dd/10_18-022-EN-A-07_2007.pdf).

Code groupMeaningMain options (excerpt)
V18345-0Basic typeTZIDC smart positioner with indicator and operator panel
Digit 1Case / mounting1 aluminum case for linear actuators per NAMUR; 2 as above with mechanical position indicator; 5 for rotary actuators per VDI/VDE 3845; 6 as above with indicator; extended angle up to 270 degrees in separate versions
Digit 2Input / communication port1: 4-20 mA two-wire; 2: with LKS adapter connector; 3: with LKS adapter and HART FSK module
Digit 3Explosion protection0 none; 1 ATEX Ex ib IIC T6; 4 ATEX Ex nA II T6; 5 IECEx Ex ib IIC T6; 6 IECEx Ex nA II T6; 7 ATEX Ex ia IIC T6; B / C GOST versions
Digit 4Output / safe position1 single acting Fail Safe; 2 single acting Fail Freeze; 4 double acting Fail Safe; 5 double acting Fail Freeze
Digit 5Connections2 cable 1/2-14 NPT plus air 1/4-18 NPT; 5 cable M20 x 1.5 plus air 1/4-18 NPT; 6 cable M20 x 1.5 plus air G1/4
Digit 6Plug-in feedback module0 none; 1 analog position feedback 4-20 mA; 3 digital position feedback; 4 shutdown module plus analog feedback; 5 analog feedback plus shutdown module; 7 analog feedback 4-20 mA / 48 V
Digit 7Mechanical digital feedback kit0 none; 1 SJ2-SN (normally closed); 3 SJ2-S1N (normally open); 4 24 V DC/AC microswitches (change-over contacts)
Digit 8Design / varnish1 standard; E special chemistry; 8 as specified

Digits are concatenated, and some combinations are mutually exclusive (for example the SIL 2 declaration CS2 is available only with certain Ex forms and single-acting Fail Safe pneumatic conditions; the mechanical digital feedback kit is only for versions with a mechanical position indicator). Generate the complete order code with the ABB official selection tool; do not invent codes.

The above data was obtained via online search. Source: https://library.e.abb.com/public/1b4989c6fa0a198fc1257b0c005493dd/10_18-022-EN-A-07_2007.pdf. Digits and meanings are subject to the official ordering manual.

V. Ex Protection and Mounting (Ex ia is not Ex d)

The following data was obtained via online search. Sources: ABB official TZIDC operating instructions 3KXE341007R4201 and Chinese data sheet DS_TZIDC_ZH_I.

ItemIntrinsically safe Ex ia / Ex ib (excerpt)Non-incendive Ex nA / other
ATEX / IECExII 2 G Ex ia IIC T6 / T4 Gb; Ex ib IIC T6 / T4 Gb; Ex ic IIC T6 / T4 GcII 3 G Ex nA IIC T6 Gc / Ex nA II T6
FM / CSAIS / I,II,III / 1 / ABCDEFG / T4 (Ta = 85 C); NI / I / 2 / ABCD / T4Type 4X; IP65
Entity parameters exampleTerminals 11/12: Vmax 30 V, Imax 104 mA, Ci 6.6 nF, Li 0 uHVerify item by item per the control drawing
Local interface limitLKS local communication interface prohibited in hazardous areasLCI only outside hazardous areas

Ex ia intrinsic safety and Ex d flameproof enclosure are two different forms. The TZIDC order code mainly offers Ex ia / Ex ib / Ex ic and Ex nA options, and the exact approval must be checked against official certificates; if unavailable or uncertain, write "please consult for confirmation". For mounting, use DIN/IEC 534 / NAMUR for linear actuators and VDI/VDE 3845 for rotary actuators; standard attachment requires separately purchased mounting material.

The above data was obtained via online search. Sources: https://library.e.abb.com/public/60ef1a03711a8025c1257a1e0032fa7a/3KXE341007R4201-42_18_84_EN_C_06_2012.pdf, https://cn.library.e.abb.com/public/e4b0677698b443bd94cac80500b9cc4a/DS_TZIDC_ZH_I.pdf. Ex ia intrinsic safety is not Ex d flameproof enclosure; official certificates govern.

VI. Selection Guide and Common Models

StepItem to confirmReference choice
1Define mountingLinear NAMUR / DIN IEC 534: digit 1 or 2; rotary VDI/VDE 3845: digit 5 or 6
2Define communication4-20 mA only: digit 1; HART: digit 3 (with LKS and FSK module)
3Define Ex protectionNone 0; Ex ia 7, Ex ib 1 or 5; Ex nA 4 or 6; check temperature code and certificate
4Define acting and safe positionSingle acting 1 / 2, double acting 4 / 5; choose Fail Safe or Fail Freeze by process safety logic
5Define connections and feedbackCable entry NPT / M20, air 1/4 NPT or G1/4; check analog / digital feedback and mechanical feedback kit as a set

Selection guide: ABB TZIDC selection follows "define mounting, define communication, define Ex protection, define acting and safe position, define connections and feedback". Core red lines: 1. HART capability depends on digit 2, not the V18345 prefix; 2. Ex ia intrinsic safety and Ex d flameproof enclosure are strictly distinguished, writing "please consult for confirmation" when unavailable; 3. LCI / LKS local interfaces are only for use outside hazardous areas; 4. Fail Safe and Fail Freeze are different codes and must follow the process safety logic; 5. where digit combinations are mutually exclusive, use the ABB official selection tool and do not invent order codes.

Common models: TZIDC basic type V18345-0...; common progression includes V18345-1 (aluminum NAMUR linear mounting), V18345-2 (with LKS / HART communication port) and V18345-3 (with LKS adapter and HART FSK module); the same series includes TZIDC-110 and TZIDC-120 intrinsically safe versions. Generate the exact complete order code with the ABB official selection tool.

If you are selecting a positioner for a control valve, or want to confirm the ABB TZIDC communication port, Ex code or fail-safe option, please feel free to contact us. We can check the order code together against your actuator interface, protocol and area certification requirements.

Orders & Inquiries

Baoman Industrial Technology (Chengdu) Co., Ltd
Tel: +86 028-60220547 | Email: info@bit-cd.com
Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China

The information above is not guaranteed to remain valid at all times. Subsequent changes will not be notified separately. Please confirm the latest information at the time of inquiry.