Home » Service & Support » Technical Documentation
Rosemount Pressure Transmitters - Working Principle & Selection
Release time:2026-11-21 13:41:01 | Views:

Rosemount (an Emerson brand) pressure transmitters are represented by the 3051 series, which uses capacitive or piezoresistive sensing elements together with silicone-oil isolation and microprocessor compensation to output 4-20 mA HART or fieldbus signals. This article organizes their working principle, 3051 / 2088 technical data, communication protocols and selection points based on Emerson official data, with delivered-model examples appended.

I. Product Positioning

ItemDescription
BrandRosemount (Emerson process measurement brand)
Series3051 series pressure transmitters (3051TG / 3051GP etc.), related 2088, 3051S, 2051, 4051S and 644 / 3144 / 248 temperature transmitters
Product typePressure transmitters (gauge GP / absolute AP / differential DP), plus temperature transmitters
Sensing principleCapacitive sensing (mainly 3051 / Coplanar platform) and piezoresistive sensing (some 2088 / 3051 configurations)
Communication4-20 mA HART / WirelessHART / FOUNDATION fieldbus / PROFIBUS / 1-5 V low-power HART
Reference accuracy3051 up to +/-0.04%, turndown 150:1, 10-year stability
Safety and warrantySIL 2/3 (IEC 61508), 5-year warranty
SourceEmerson official site (emerson.com), Rosemount 3051 / 2088 product data

This delivery includes 3051TG3A2B21AS1KBQ4M5HR7 (3051TG gauge pressure transmitter), 3051GP3A2B21AB4M5Q4HR5 (3051GP gauge pressure transmitter), plus 3144PD6A2NAM5CQ4HR7 and 644HAKBJ2M5Q4 (temperature transmitters). The 3051TG / 3051GP are gauge pressure transmitters supporting multiple communication protocols with reference accuracy up to +/-0.04%.

The above data was obtained via online search. Source: Emerson official site (emerson.com). Parameters are subject to the latest original-manufacturer data.

Rosemount transmitter arrival photo
Rosemount transmitter arrival photo, for selection reference only

II. Working Principle (Capacitive / Piezoresistive Sensors)

The following data was obtained via online search. Source: Emerson official Rosemount 3051 product data (https://www.emerson.com/is/content/emerson/en/measurement-instrumentation/technical/products/unaudited/documents/rosemount-3051.pdf).

TypePressure pathDetection mechanismTypical application
Capacitive sensorProcess pressure passes through the isolating diaphragm and fill fluid to the sensing diaphragm located between capacitor platesThe sensing diaphragm bends under pressure, changing the capacitance formed with the plates on both sides; the electrical signal is converted to digital for the microprocessor3051 series (Coplanar / Inline platforms), differential, gauge and absolute pressure measurement
Piezoresistive (strain-gauge) sensorProcess pressure passes through the isolating diaphragm and fill fluid to the sensing diaphragmDiaphragm bending changes the resistance in a Wheatstone bridge; the imbalance signal is converted to digital for the microprocessorSome 2088 and 3051 configurations, gauge and absolute pressure measurement

Both principles follow the chain "isolating diaphragm, fill fluid, sensing diaphragm, electrical signal, microprocessor compensation, standard output". The isolating diaphragm keeps the sensor away from corrosive media, and the small fill-fluid volume reduces temperature drift. The microprocessor performs linearization, temperature compensation and zero / span calibration. Gauge (GP) uses atmosphere as the low-side reference, absolute (AP) uses a sealed vacuum, and differential (DP) measures the difference between two sides; the sensing principle is identical, with only the chamber connections differing.

The above data was obtained via online search. Source: https://www.emerson.com/is/content/emerson/en/measurement-instrumentation/technical/products/unaudited/documents/rosemount-3051.pdf. The specific sensor configuration is subject to the official data of the corresponding model.

III. 3051 Core Technical Data

The following data was obtained via online search. Source: Emerson official site (emerson.com), Rosemount 3051 product data.

ParameterDescription
Communication4-20 mA HART / WirelessHART / FOUNDATION fieldbus / PROFIBUS / 1-5 V low-power HART
Reference accuracyUp to +/-0.04%
Turndown ratio150:1
Stability10-year stability
Measurement rangeCoplanar up to 4000 psi (275.79 bar); Inline up to 20000 psi (1378.95 bar)
Wetted materials316L SST / Alloy C-276 / Alloy 400 / tantalum / gold-plated alloy
Safety approvalSIL 2/3 (IEC 61508)
Warranty5 years

The 3051T integrates the sensor, electronics and a single isolating diaphragm, with calibrated spans for gauge and absolute pressure from 0.3 to 10000 psi. The 3051GP has a calibrated span starting around 0 to 1.5 psi and up to 0 to 4000 psi. Selection must first fix the measurement type and span, then wetted materials and protocol, never just the appearance.

The above data was obtained via online search. Source: Emerson official site (emerson.com). Parameters are subject to the latest original-manufacturer data.

IV. Communication Protocols and Signal Output

Protocol / outputFeatureApplication
4-20 mA HARTAnalog for basic control, HART digital signal superimposed on the current loop for configuration and diagnosticsTransition from legacy analog systems to digital asset management
WirelessHARTWireless HART networkHard-to-wire measurement points and retrofit projects
FOUNDATION fieldbusFF bus function-block communicationFF segment integration; check function blocks and segment loading
PROFIBUSPROFIBUS bus communicationIntegration with Siemens PA / DP systems
1-5 V low-power HARTLow-power HART outputBattery or solar powered low-power applications

HART allows a handheld communicator or asset management system to remotely read process variables, configure spans and diagnose faults without disturbing the 4-20 mA control signal. The 644 / 3144 temperature transmitters support HART / FF / PROFIBUS PA, with outputs of 4-20 mA / HART, FF and PROFIBUS PA.

The above data was obtained via online search. Source: Emerson official site (emerson.com). The supported protocol range is subject to the ordering data of the specific model.

V. Related Models and Temperature Transmitters

The following data was obtained via online search. Source: Emerson official site (emerson.com), Rosemount product data.

ModelCategoryKey point
3051SHigh-accuracy modular pressure transmitter platformModular design for high accuracy and advanced diagnostics
2051Economical Coplanar pressure transmitterEconomical platform for general gauge / differential pressure
4051SPressure transmitterCheck span and protocol against official data
2088Gauge / absolute pressure transmitterSolid-state sensor, commonly piezoresistive (silicon strain gauge), output 4-20 mA HART or 1-5 V low-power HART
644 (644H)Temperature transmitterHead mount, universal RTD / thermocouple / mV / ohm input, single / dual sensor
3144PDTemperature transmitterDIN-rail / field mount, Hot Backup, sensor drift alarm, thermocouple degradation diagnostics
248Temperature transmitterEconomical head-mount type

Temperature transmitters support Callendar-Van Dusen sensor matching to improve temperature accuracy; the 644H is head-mounted and the 3144PD is DIN-rail / field mounted. Pressure and temperature transmitters belong to different product lines but share the same protocol family, allowing unified configuration and diagnostics in one asset management system.

The above data was obtained via online search. Source: Emerson official site (emerson.com). Functions and mounting are subject to the official data of the corresponding model.

VI. Selection Guide and Common Models

StepItem to confirmReference choice
1Measurement type and spanGauge GP / absolute AP / differential DP; Coplanar up to 4000 psi, Inline up to 20000 psi
2Communication protocol4-20 mA HART / WirelessHART / FF / PROFIBUS / 1-5 V low-power HART
3Wetted materials316L SST / C-276 / Alloy 400 / tantalum / gold-plated alloy, selected by media corrosiveness
4Accuracy and approvalReference accuracy up to +/-0.04%, turndown 150:1; verify approval when SIL 2/3 is required
5Mounting and sensor typePressure: Coplanar / Inline and process connection; temperature: head 644H / rail 3144PD and RTD / thermocouple / mV / ohm

Selection guide: Rosemount pressure transmitter selection follows "define measurement type and span, define protocol, define wetted materials, define accuracy and safety approval, define mounting". Note that 3051 and 2088 have different sensor configurations; HART / FF / PROFIBUS support must be confirmed against the ordering data of the specific model; intrinsic safety and flameproof enclosure are two different Ex forms and must be confirmed against the nameplate and certificates, writing "please consult for confirmation" when unavailable. Final selection is subject to Emerson official data and confirmation at the time of inquiry.

Common models: This delivery includes 3051TG3A2B21AS1KBQ4M5HR7 (3051TG gauge), 3051GP3A2B21AB4M5Q4HR5 (3051GP gauge), 3144PD6A2NAM5CQ4HR7 and 644HAKBJ2M5Q4 (temperature transmitters); related series include 3051S, 2051, 4051S, 2088 and the 248 temperature transmitter.

If you are selecting a pressure or temperature transmitter for a process, or want to confirm the span, protocol or wetted materials of a 3051 / 2088, please feel free to contact us. We can check the model and order code together against your media, span and system protocol.

Orders & Inquiries

Baoman Industrial Technology (Chengdu) Co., Ltd
Tel: +86 028-60220547 | Email: info@bit-cd.com
Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China

The information above is not guaranteed to remain valid at all times. Subsequent changes will not be notified separately. Please confirm the latest information at the time of inquiry.