Home » Service & Support » Technical Documentation
Azbil AVP Intelligent Valve Positioner - Technical Data & Selection
Release time:2026-11-21 13:41:01 | Views:

The Azbil AVP series comprises electro-pneumatic smart valve positioners, covering the integral AVP100 / AVP300 and the remote-mount AVP200, with HART communication, travel transmission and auto set-up. This article organizes their model split, core technical data, flow characteristics, explosion protection, installation and selection points based on official azbil catalogs. No AVP photo or in-house article material is available; all online-sourced data is annotated with sources in the text, and parameters are subject to the latest official azbil catalog.

I. Product Positioning

ItemDescription
BrandAzbil (azbil Corporation, formerly Yamatake; independent brand)
SeriesAVP100 (integral basic), AVP200 (remote-mount), AVP300 (integral smart)
Product typeElectro-pneumatic smart valve positioner (accepts a 4-20 mA DC signal and controls a pneumatic control valve)
CommunicationAVP200/201: SFN; AVP202: HART; AVP302: HART; AVP307: HART plus travel output
Input signal4-20 mA DC, freely configurable control range (split range possible)
Supply air140-700 kPa (20-100 psi)
Ingress protectionAVP300: equivalent to NEMA 4 / IEC IP66
Source documentsazbil catalogs SS2-AVP200-0100-20 and CA2-AVP300F-14

The AVP series falls into two construction types. The AVP100 / AVP300 are integral units with the positioner and travel detector in one housing. The AVP200 is a remote-mount design in which the travel detector is separated from the positioner body and linked by a dedicated cable; the detector can be mounted on a valve body subjected to 10 G vibration at 2000 Hz or 80 C ambient, while the body is placed in a steadier location such as a 2-inch pipe, easing maintenance and improving vibration resistance.

Source: azbil official catalogs SS2-AVP200-0100-20 and CA2-AVP300F-14; azbil Taiwan AVP300 product page. Brand ownership: Azbil is an independent brand. Parameters are subject to the latest official catalog.

Digital valve positioner appearance reference
Digital valve positioner appearance reference only, not an actual Azbil AVP unit; refer to the official catalog

II. Series Models and Communication Split

The following data was obtained via online search. Sources: azbil catalog SS2-AVP200-0100-20 (https://www.azbil.com/products/factory/download/catalog-spec/SS2-AVP200-0100-20.pdf), CA2-AVP300F-14 (https://www.azbil.com/products/factory/download/catalog-spec/CA2-AVP300F-14.pdf), and the azbil Taiwan AVP300 product page (https://tw.azbil.com/product-info/auto-products/control-valve-positioner/avp300/).

Series / modelConstructionCommunication and functionsActuator suitability
AVP100 / AVP102Integral basicAVP100: 4-20 mA analog, no travel transmitter; AVP102: with HARTMainly single-acting pneumatic actuators
AVP200 / AVP201Remote-mount (detector separated from body)SFN communication; AVP201 with 4-20 mA travel transmissionSevere vibration or high-temperature service; long cable options
AVP202Remote-mountHART; input resistance typically 400 ohm (300 ohm for AVP200/201)Severe vibration service needing remote configuration and diagnostics
AVP300 / AVP301Integral smartAVP300: basic smart type; AVP301 with 4-20 mA travel transmissionSingle / double acting; 10-100 mm linear or approx. 90 degree rotary
AVP302Integral smartHART communicationGeneral service needing HART configuration and self-diagnostics
AVP307Integral smartHART plus travel output, with valve diagnosis parametersSmart plant and predictive maintenance

First decide remote-mount versus integral: choose the AVP200 series for severe vibration or hot valve bodies, and the AVP300 series for normal mounting. Then fix the suffix by whether HART and 4-20 mA valve position feedback are required. A reversible relay must be purchased separately for double-acting actuators, and double-acting versions generally do not provide local manual operation; whether surge protection is needed should be confirmed with the user.

The above data was obtained via online search. Sources: https://www.azbil.com/products/factory/download/catalog-spec/SS2-AVP200-0100-20.pdf, https://www.azbil.com/products/factory/download/catalog-spec/CA2-AVP300F-14.pdf, https://tw.azbil.com/product-info/auto-products/control-valve-positioner/avp300/. Suffix definitions are subject to the official ordering catalog.

III. Core Technical Data

The following data was obtained via online search. Sources: azbil catalogs SS2-AVP200-0100-20 and CA2-AVP300F-14.

ParameterAVP200 series (remote-mount)AVP300 series (integral)
Input signal4-20 mA DC; input resistance 300 ohm (AVP200/201), 400 ohm (AVP202)4-20 mA DC, split range possible
Supply air140-700 kPa140-700 kPa (20-100 psi)
Travel range10-100 mm linear; approx. 90 degree rotary10-100 mm linear; approx. 90 degree rotary
Basic accuracy+/-1% F.S. (+/-2.5% with custom characteristics); cable 5 m +/-1.2%, 10 m +/-1.7%, 20 m +/-2.7% F.S.Refer to official catalog
Air consumptionSingle acting: at 140 kPa up to 4 L/min, at 280 kPa up to 5 L/min, at 500 kPa up to 6 L/min; double acting at 400 kPa up to 10 L/minLow-consumption design; values per official catalog
Maximum air deliverySingle acting up to 110 L/min at 140 kPa; double acting up to 250 L/min at 400 kPaRefer to official catalog
Flow characteristicsLinear, equal percentage, quick opening, custom 15-segmentLinear, equal percentage, quick opening and custom characteristics
Ambient temperatureGeneral: -40 to +80 C; TIIS flameproof: -20 to +55 C-40 to +80 C
VibrationBody 20 m/s2 (5-400 Hz); travel detector 100 m/s2 (5-2000 Hz)2 G (5-400 Hz)
Material / weightDie-cast aluminum body, stainless detector housing; approx. 3.3 kg single acting, 3.6 kg double acting (without filter regulator)Approx. 2.5 kg

Accuracy degrades as the remote-mount cable lengthens, so cable error should be included in the loop accuracy budget for long runs. The AVP202 input resistance is 400 ohm per 20 mA versus 300 ohm per 20 mA for AVP200/201; total loop resistance must be rechecked when adding or replacing a HART load resistor.

The above data was obtained via online search. Sources: https://www.azbil.com/products/factory/download/catalog-spec/SS2-AVP200-0100-20.pdf, https://www.azbil.com/products/factory/download/catalog-spec/CA2-AVP300F-14.pdf. Unlisted parameters are subject to the official catalog.

IV. Set-up and Diagnostic Functions

The following data was obtained via online search. Sources: azbil catalog CA2-AVP300F-14 and the azbil Taiwan AVP300 product page.

FunctionDescriptionBenefit
Auto set-upDynamically scans the valve assembly and makes optimum adjustments; zero and span are non-interactiveShorter commissioning, fewer human setting errors
Forced fully closedForces the valve fully closed without re-adjusting zeroConvenient for in-line checks and maintenance
Valve diagnosis parameters300 series includes parameters for early detection of control valve anomalies; AVP307 with travel outputSupports spare-parts management and predictive maintenance
Auto / manual switchingExternal Auto/Manual switch on single-acting modelsLocal manual operation during commissioning and troubleshooting
Flow characteristic configurationLinear, equal percentage, quick opening, custom 15-segmentMatches inherent valve characteristics to process needs

Before auto set-up, confirm stable supply air, a free-travel actuator and correct feedback lever mounting: the lever can rotate about 20 degrees above and below horizontal (40 degrees of travel); beyond this range the positioner cannot work properly, and an extension rod must be selected for large actuators.

The above data was obtained via online search. Sources: https://www.azbil.com/products/factory/download/catalog-spec/CA2-AVP300F-14.pdf, https://tw.azbil.com/product-info/auto-products/control-valve-positioner/avp300/. Functions are subject to the catalog of the specific model.

V. Explosion Protection, Ingress and Connections

The following data was obtained via online search. Sources: azbil catalogs CA2-AVP300F-14 and SS2-AVP200-0100-20.

ItemAVP300 seriesAVP200 series
Housing protectionEquivalent to NEMA 4 / IEC IP66Die-cast aluminum body, stainless detector housing
Flameproof approvals (excerpt)TIIS / KCs / FM / ATEX / CCC / IECEx / INMETRO / CNS flameproofTIIS flameproof (ambient -20 to +55 C)
Intrinsically safe approvals (excerpt)FM / ATEX / CNS intrinsic safety; CCC intrinsic safety and flameproofDepending on model options, per official certificates
Pneumatic connectionPer mounting kit, refer to official catalogRc1/4 or 1/4 NPT internal thread
Electrical connectionDepending on model options, refer to official catalogG1/2, 1/2 NPT or M20 x 1.5 internal thread

Ex ia intrinsic safety and Ex d flameproof enclosure are two different forms. The AVP300 series lists both options, but a single order code corresponds to only one of them. The approval type and temperature class must be specified when ordering; if unavailable or uncertain, write "please consult for confirmation" and never invent an approval.

The above data was obtained via online search. Sources: https://www.azbil.com/products/factory/download/catalog-spec/CA2-AVP300F-14.pdf, https://www.azbil.com/products/factory/download/catalog-spec/SS2-AVP200-0100-20.pdf. Ex forms are subject to official certificates.

VI. Selection Guide and Common Models

StepItem to confirmReference choice
1ConstructionSevere vibration / hot valve body: remote-mount AVP200; normal: integral AVP300
2Communication and feedback4-20 mA only: AVP200/300; HART: AVP202/302; HART plus travel output: AVP307; travel transmitter: AVP201/301
3Actuator typeReversible relay required for double acting; local manual operation usually absent
4Explosion protectionSelect Ex ia or Ex d option by zone, check temperature class and certificate
5OptionsSurge protection (peak voltage 12 kV, peak current 1000 A), filter regulators RA1B / KZ03, feedback extension rod

Selection guide: Azbil AVP selection follows "remote-mount or integral, then communication and feedback, then single or double acting, then Ex approval, then options". Key points: the AVP202 input resistance differs from AVP200/201 so the HART loop load must be recalculated; remote-mount accuracy varies with cable length; intrinsic safety and flameproof enclosure must not be mixed; double-acting versions need a reversible relay. All parameters are subject to the official azbil catalog and ordering tool; this article does not replace the original data sheet.

Common models: AVP100 / AVP102 (integral basic), AVP200 / AVP201 / AVP202 (remote-mount, AVP202 with HART), AVP300 / AVP301 / AVP302 / AVP307 (integral smart, AVP307 with HART and travel output).

If you are selecting a positioner for a control valve, or want to confirm the remote-mount or integral form, the HART version or the Ex option of an AVP, please feel free to contact us. We can check the model together against your actuator type, communication protocol and site certification requirements.

Orders & Inquiries

Baoman Industrial Technology (Chengdu) Co., Ltd
Tel: +86 028-60220547 | Email: info@bit-cd.com
Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China

The information above is not guaranteed to remain valid at all times. Subsequent changes will not be notified separately. Please confirm the latest information at the time of inquiry.