Home » Service & Support » Technical Documentation
Filter Regulators - Working Principle & Selection Overview (Multi-Brand Comparis
Release time:2026-11-21 13:41:01 | Views:

A filter regulator combines three functions - filtration, pressure regulation and over-pressure relief - in one unit, and is a core air-preparation accessory for instrument air and actuator supply. This article first explains the working principle of "filtration + regulation + relief", then compares Norgren B38P, Fisher 67CFR / 67DFR, ControlAir 350SS and Rotork Midland 3500 series, covering port size, Cv, filtration grade, material and selection points for fast, application-based positioning.

I. Product Positioning

ItemDescription
Product categoryFilter regulator / air-preparation unit, three-in-one: filtration + regulation + relief
Core functionsRemove air impurities, stabilize inlet pressure to a set outlet pressure, and relieve excess pressure through an internal relief valve
Typical applicationsSingle-instrument air supply, actuator supply regulation, multi-instrument manifold supply, high-flow air preparation in harsh conditions
Brands comparedIMI Norgren B38P, Fisher 67C/67D series, ControlAir 350SS, Rotork Midland 3500 series
Brand ownershipFisher to Emerson; Norgren to IMI plc; ControlAir independent; Midland-ACS to Rotork
SourceFisher manuals 5469 / 5858, IMI "B38P" datasheet, ControlAir official spec page, Midland datasheet PUB117-001-00

Sources: Fisher 67C series instrument supply regulator manual (5469), 67D series manual (5858); IMI Precision Engineering "B38P" datasheet; ControlAir official specification page (online); Rotork Midland datasheet PUB117-001-00. Parameters are subject to each brand's official manual and nameplate / order.

Multi-brand filter regulators
Multi-brand filter regulator appearance reference, not the actual model shown; subject to official datasheets

II. Working Principle: Filtration + Regulation + Relief

FunctionPrincipleKey parts
FiltrationAir passes through the filter element; impurities and droplets are trapped and collect in the bowl, drained manually or automaticallyFilter element (5 / 25 / 40 micron, etc.), bowl, drain valve
RegulationThe diaphragm senses outlet pressure and balances against the adjusting spring force; when outlet is low the valve opens to add air, and closes near the set point, giving direct-acting regulationDiaphragm, adjusting spring, valve plug / seat
ReliefWhen downstream pressure exceeds the set point, the diaphragm compresses the relief spring and opens a vent path to atmosphere; some models have a Smart Bleed internal check valve so downstream backflows upstream on inlet pressure lossInternal relief valve (soft seat), Smart Bleed check valve option

Note that the internal relief valve has a small Cv (Fisher 67C/67D is 0.045) and only handles very small seat leakage; it is not complete over-pressure protection. If inlet pressure may exceed the maximum rating of downstream equipment, a separate relief / limiting device must be added. Media compatibility depends on the elastomer: NBR for ordinary air, FKM for high temperature / corrosive service, and VMQ for low temperature but incompatible with hydrocarbon gas.

Sources: Fisher 67C / 67D series instrument supply regulator manuals (5469 / 5858) on construction and selection; IMI "B38P" datasheet.

III. Multi-Brand Comparison Table

Brand / seriesPort sizeFlow / CvFiltration gradeBody materialKey features
Norgren B38P (IMI)1/4" to 1" NPT (3/4" on request)Max 4500 L/min5 / 25 / 40 micron stainless 316Stainless steel, NACE MR-0175High flow, harsh service (drilling / nuclear / coal chemical / food)
Fisher 67CFR (Emerson)1/4" NPT onlyCv 0.365 micron polyethylene (cellulose / PVDF / stainless optional)Aluminum (67CFSR stainless)Small-flow single-instrument supply, most common economy model
Fisher 67DFR (Emerson)1/2" NPTCv 1.335 micron polyethylene (fiberglass / PVDF / stainless optional)Aluminum (67DFSR stainless)High-flow actuators / multi-instrument manifold supply
ControlAir 350SS1/4" or 1/2" NPTRelief flow 1.0 SCFM at +10 psig25 micron standard, 5 micron optional316 stainless steel, NACE MR-0175Fluorocarbon diaphragm, sour gas and marine service, stable output and low pressure drop
Midland 3500 (Rotork)1/4" to 2" NPT1" model Cv 8.8 / 7800 L/min40 micron standard, 5 micron optional316L stainless steelAir-preparation unit, bowl level window, ATEX approval

Sources: IMI "B38P" datasheet; Fisher manuals 5469 / 5858; ControlAir official spec page (data obtained via online search, source: controlair.com.cn model 350/360/370SS specification page); Rotork Midland datasheet PUB117-001-00. Port sizes and Cv are not interchangeable across brands.

IV. Key Technical Data Comparison

ParameterNorgren B38PFisher 67CFR / 67DFRControlAir 350SS
Maximum inlet pressureManual drain 31 bar; automatic drain 17 bar250 psig (17.2 bar)290 psig (21 bar); automatic-drain option 150 psig
Outlet pressure rangesNot listed in datasheet, consult for confirmation (gauge ranges 0-6 / 0-10 bar)0-20 / 0-35 / 0-60 / 0-125 psig (spring ranges)0-30 / 0-60 / 0-100 / 0-150 psig
Temperature rangeNBR -40 to +80 deg C; FKM -20 to +80 deg CNBR -29 to 82 deg C; FKM -18 to 82 deg C (up to 149 deg C with PVDF/SST); VMQ -51 to 82 deg C-29 to 82 deg C; low-temperature option -50 to 90 deg C
Internal relief valve CvConsult for confirmation0.045 (very small seat leakage only)Consult for confirmation
WeightConsult for confirmation67CFR about 0.5 kg; 67DFR about 1 kg1/4" about 1.0 kg; 1/2" about 1.3 kg

Sources: IMI "B38P" datasheet (outlet regulating range not listed, noted as unresolved); Fisher manuals 5469 / 5858; ControlAir official spec page (online research). Unlisted items are subject to nameplate / order or official manual and are not invented.

V. Selection Points and Port-Size Clarification

StepPointNotes
1 Set size and flowSelect platform by air consumption / CvThe 67CFR is 1/4" NPT only (Cv 0.36) and must not be written as 1/2" optional; for 1/2" choose the 67DFR (Cv 1.33) or another brand
2 Set material and serviceAluminum for ordinary air, stainless for corrosive / humid / marine service67CFR to 67CFSR, 67DFR to 67DFSR; B38P / 350SS / Midland 3500 have stainless bodies as standard
3 Set outlet pressure rangeChoose spring / model range by required regulated pressureFisher four color-coded springs; ControlAir four output ranges; never adjust a spring beyond its calibrated range
4 Set filtration and drainChoose element grade by air quality, drain type by maintenance method5 micron is common; manual / automatic drain; the B38P medium bowl applies only to 1/2" and 1"
5 Set accessories and approvalsGauge, mounting bracket, NACE, ATEX per site requirementsFor sour service check NACE MR-0175 (Midland 3500 datasheet does not list NACE, confirm separately)

Sources: Fisher manuals 5469 / 5858; IMI "B38P" datasheet; ControlAir official spec page (online); Rotork Midland datasheet PUB117-001-00. Brand ownership: Fisher belongs to Emerson, Norgren to IMI, Midland to Rotork.

VI. Selection Guide and Common Models

Selection guide: Filter regulator selection follows the sequence "define size and flow, define material and service, define pressure range and filtration grade, then define accessories and approvals". Core red lines: 1. the Fisher 67CFR has only one port size, 1/4" NPT, and must not be written as 1/2" optional; for 1/2" use the 67DFR; 2. the internal relief valve is not complete over-pressure protection, and if inlet pressure may exceed the limit a separate relief / limiting device must be added; 3. port codes, Cv, elements and materials are not interchangeable between brands, and parameters are subject to official manuals and nameplate / order. Unlisted items should be confirmed by inquiry.

Common models: Norgren B38P-244-B1MA (1/4" NPT manual short bowl) and B38P-844-M1MA (1" NPT manual medium bowl), Fisher 67CFR (1/4") and 67DFR (1/2"), ControlAir 350SS (1/4" or 1/2"), Midland 8FRMSV07205 (1"). The above parameters are compiled from each brand's official manuals and spec pages, for selection and spare-part cross-check only, not a guarantee.

If you are selecting a filter regulator for an instrument or actuator, want to compare brands and port sizes, or want to confirm inlet pressure, filtration grade and material requirements, please feel free to contact us. We can help you narrow down the right model against your air quality and operating conditions.

Orders & Inquiries

Baoman Industrial Technology (Chengdu) Co., Ltd
Tel: +86 028-60220547 | Email: info@bit-cd.com
Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China

The information above is not guaranteed to remain valid at all times. Subsequent changes will not be notified separately. Please confirm the latest information at the time of inquiry.