Home » Service & Support » Technical Documentation
Flowserve XL Series Positioners - Technical Data & Selection
Release time:2026-11-21 13:41:01 | Views:

The Flowserve Valtek XL series is a two-stage high-performance analog valve positioner that can be switched in the field between a 3-15 psi pneumatic P/P module and a 4-20 mA NT3000 electro-pneumatic I/P module, for single / double acting and linear / rotary service. This article organizes its technical data, selection rules and XL90 model numbering fields according to official Flowserve data sheets and the IOM, and states that the digit-by-digit interpretation of the complete order string XLL3W1L11B100 is not invented: unpublished fields are marked "please consult for confirmation".

I. Product Positioning

ItemDescription
BrandFlowserve (Valtek Control Products, USA; the XL is the Valtek analog positioner platform)
SeriesValtek XL series high-performance analog positioners (including the rotary XL90)
Model coveredXLL3W1L11B100 (delivered as an XL series high-performance valve positioner with two stainless steel pressure gauges)
Product typeTwo-stage, high-gain analog positioner with no microprocessor, no HART / FF / PA communication and no self-diagnostics
InputP/P pneumatic module 3-15 psi, or I/P module 4-20 mA with NT3000 series transducer, field interchangeable
ActuatorsSingle / double acting, linear / rotary universal, split range capable; XL90 for rotary service
SourceFlowserve / Valtek official data sheet VLATB048 (FCD VLATB045-07), IOM Pub. 10077320 / 45-1, Flowserve official XL / XL90 product page

The XL series is designed for control loops requiring fast response and uses a two-stage high-gain structure; its mounting face is compatible with Beta / 80R, and the XL90 shares the rotary mounting bracket with the Logix 1000. The delivered unit carries two Ashcroft stainless steel pressure gauges, and its nameplate shows NT3000 Transducer and EXPLOSION PROOF / INTRINSICALLY SAFE markings.

This data was obtained via web search. Sources: Flowserve / Valtek "Valtek XL Series Positioners" data sheet VLATB048 (FCD VLATB045-07), "Valtek XL Series High-Performance Positioner" IOM (Pub. 10077320 / 45-1) and the Flowserve official XL / XL90 product page (URL in section III). Official open documentation does not publish a digit-by-digit interpretation of the complete order string XLL3W1L11B100, and no interpretation is invented.

Flowserve Valtek XL series valve positioner
Flowserve XL series product photo, for selection reference only

II. Brand and Product Line Boundaries (Red Lines)

Product lineTypeCommunicationBoundary with XL
Valtek XL / XL90Two-stage high-gain analog positionerNone (P/P or I/P)Subject of this article; no microprocessor, no protocol, no diagnostics
Flowserve Logix 3800 / 3800eDigital valve positionerHART with diagnosticsAlso a Flowserve positioner but on a digital platform; spare parts and configuration documents cannot be interchanged with XL
PMV D3 / D20 / D30Digital valve positionerHARTThe PMV brand has been sold; formerly Flowserve but no longer part of it; for legacy maintenance only, not a replacement for XL or Logix

Define the product line first: a host system requiring HART / FF / PA communication or valve diagnostics should select a digital positioner such as the Logix, not an extension of the XL; PMV digital positioners are only for legacy maintenance. Technical documents, spare parts and order codes of the three lines must not be mixed, which is the key red line of this verification.

This data was obtained via web search. Sources: Flowserve official product pages and Flowserve / Valtek XL data sheet VLATB048, IOM 45-1; the PMV brand sale is subject to manufacturer announcements.

III. Main Technical Data

The following data comes from official Flowserve / Valtek XL series data sheets and the IOM; unpublished digit interpretations and unlisted items are treated as "please consult for confirmation / subject to nameplate and order" and are not invented.

ParameterDescription
ConstructionTwo-stage high-gain positioner: signal pressure acts on the input bellows and is compared with feedback spring tension (via feedback lever / cam); imbalance moves the bellows and pilot valve, changing output pressure on the actuator sides until balance; designed as four-way, plugging one output port makes it three-way
Input signalP/P pneumatic 3-15 psi (0.21-1.03 bar), optional 6-30 psi (0.41-2.1 bar) and two / three / four-way split range; I/P 4-20 mA, optional 10-50 mA and two / three / four-way split range; I/P uses NT3000 series transducer (not I/P 2000)
Supply and air qualitySupply 30-150 psi (2.1-10.3 bar), ports rated 150 psi, normally no supply regulator needed; pneumatic type needs a 5 µm filter and I/P type a coalescing filter; air per ISA S7.3 (dew point at least 18 °F / 10 °C below ambient)
Deadband and linearityDeadband 0.1 % FS; hysteresis 0.1 % FS; resolution 0.1 % FS; independent linearity +1.0 % FS; repeatability 0.1 % FS (same for pneumatic and I/P)
Air consumption and flowSteady consumption at 60 psi: pneumatic 0.28 SCFM (0.47 m³/h), I/P 0.34 SCFM (0.58 m³/h); maximum flow at 60 psi 16.5 SCFM (28 m³/h) for both; gain 400-1100:1 (pneumatic) / 535-1465:1 (I/P)
Pressure gaugesDelivered unit has two Ashcroft stainless steel gauges; sample GAUGES field lists 2=stainless gauge with brass connection (standard), 4=bar/psi/kPa, 6=kg/cm²/psi, 8=stainless gauge, Z=no gauge; gauge port 1/8" NPT
Connections and materialsSupply / instrument / output 1/4" NPT, signal conduit 1/2" NPT (optional M20), gauge port 1/8" NPT; standard materials stainless steel, anodized aluminum, epoxy powder coated steel and nitrile rubber; cover and body epoxy powder coated and internally purged with instrument air
Temperature and weightStandard: pneumatic -29 to +85 °C, I/P -29 to +82 °C; extended: pneumatic -45 to +121 °C, I/P -40 to +82 °C; net weight about 1.4 kg (pneumatic) and 2.5 kg (I/P)
Hazardous area approvalWith NT3000 I/P: FM / CSA flameproof Class I Div 1 Grp B/C/D and intrinsically safe Class I/II/III Div 1 Grp A-E, CENELEC EEx d IIB+H2 T6, CENELEC EEx ia IIC T4 (Ta=80 °C); Ex ia intrinsic safety and Ex d flameproof enclosure must not be confused, gas group and temperature class per nameplate

This data was obtained via web search. Sources: 1. Flowserve / Valtek "Valtek XL Series Positioners" data sheet VLATB048 / FCD VLATB045-07, https://pro-quip.com/wp-content/uploads/2024/01/Valtek-XL-Positioner.pdf ; 2. "Valtek XL Series High-Performance Positioner" IOM, Pub. 10077320 / 45-1, https://pro-quip.com/wp-content/uploads/2024/01/Valtek-XL-High-Performance-Positioner.pdf ; 3. Flowserve official Analog Positioners - Valtek XL-XL90 page https://www.flowserve.com/en/products/products-catalog/actuators-instrumentation/positioners/analog-positioners-valtek-xl-xl90/ . Parameters are not guaranteed values and are subject to the latest official data sheets and nameplate.

IV. Order Code Interpretation and XL90 Model Numbering Fields

Official open documentation does not publish a digit-by-digit interpretation of the complete order string XLL3W1L11B100, so no meaning is assigned to its digits. A similar string appears in public procurement records: XLL3W1L21B100-NT3002042SN1W00, with the NT3000... suffix being the I/P converter module; the two differ at digit position 21 / 11, whose meaning is unpublished. For reference, the officially published XL90 model numbering fields are shown below.

FieldValues published in the official sample (excerpt)Notes
PrefixManufacturer / coating, e.g. VW = Valtek white epoxyApplies to the XL90 numbering system only, for reference
Input type90=pneumatic 3-15 psi; 91=standard NT3000 I/P; 92=FM/CSA flameproof intrinsically safe; 93=CENELEC EEx d; 94=CENELEC EEx ia/ib; 95=SAA Ex d / Ex iaDistinguishes pneumatic / electro-pneumatic and hazardous area approval
IndicatorPer sample optionsExact notation per official sample
Gauges2=stainless gauge with brass connection (standard), 4=bar/psi/kPa, 8=stainless gauge, Z=no gaugeSample also lists 6=kg/cm²/psi
Temperature7=standard, 8=extendedCorresponds to standard / extended temperature range
CamPer sample optionsUsed for flow characterization; unlisted items to be confirmed on inquiry
ConduitP=1/2 NPT, R=M20Signal electrical connection
OptionsPer sample optionsUnlisted items to be confirmed on inquiry
Output shaftD=Double D, L=NAMURFeedback / mounting interface form

The exact meaning of the prefix, each numeric segment and B100 in XLL3W1L11B100 must be confirmed with Flowserve or by nameplate / order. The XL90 fields above are an officially published numbering system for format reference only and must not be taken as a digit-by-digit conclusion for XLL3W1L11B100.

This data was obtained via web search. Sources: XL90 Model Numbering System in Flowserve / Valtek data sheet VLATB048 / FCD VLATB045-07; public procurement records and the delivered-product page are used to confirm the XLL3W1L...B100 order string format and NT3000 suffix. Unpublished fields are marked "please consult for confirmation" and are not invented.

V. Related Models and Options

Model / moduleDescriptionSource
XLL3W1L21B100-NT3002042SN1W00Similar XL order string in public procurement records with NT3000... I/P converter suffix; differs from the delivered string at digit position 21 / 11, whose meaning is unpublishedPublic procurement records (format confirmation), VLATB048
Valtek XL90Rotary version of the XL series, rotary feedback up to 180 degrees, shares the rotary mounting bracket with Logix 1000; optional dome indicator, limit switches and 4-20 mA position transmitterVLATB048
NT3000 I/P converterElectro-pneumatic converter matched to the XL, converting 4-20 mA to 3-15 psi; FM / CSA flameproof and intrinsically safe, CENELEC EEx d / EEx ia approvals; visible on the delivered nameplateIOM 45-1 and sample Table II
Flowserve Logix 3800 / 3800eFlowserve digital positioners with HART, microprocessor and diagnostics; different product line from the analog XL, selection and spare parts must not be mixedFlowserve official product pages
PMV D3 / D20 / D30Digital positioners of the former Flowserve PMV brand (brand sold); for legacy maintenance only, not a replacement for XL or LogixManufacturer brand announcements and public data

This data was obtained via web search. Sources: VLATB048 / FCD VLATB045-07, IOM Pub. 10077320 / 45-1, Flowserve official XL / XL90 product page and public procurement records (used to confirm the order string format).

VI. Selection Guide and Common Models

Selection guide: Define the product line first: the XL is an analog positioner, and a host system requiring HART / FF / PA communication or valve diagnostics should select a digital positioner such as the Logix 3800 / 3800e, not an extension of the XL; PMV digital positioners are for legacy maintenance only and must not be used as spare-part replacements. Then confirm the input: a 4-20 mA electrical signal requires the NT3000 I/P module, while a 3-15 psi pneumatic signal uses the P/P module, and the two can be interchanged in the field. Then check single / double acting and linear / rotary against the actuator (XL90 for rotary), supply 30-150 psi, air quality, 5 µm filtration (coalescing filter for I/P), deadband 0.1 % FS, linearity +1.0 % FS, maximum flow 16.5 SCFM at 60 psi, temperature range and weight. For hazardous areas, check the NT3000 module's FM / CSA / CENELEC certificates and nameplate item by item for the Ex d or Ex ia gas group and temperature class, never mixing intrinsic safety with flameproof enclosure. Most importantly, since the digit-by-digit interpretation of XLL3W1L11B100 is not published, confirm each field with Flowserve against the nameplate / order before ordering or sourcing spare parts.

Common models: Flowserve Valtek XL series XLL3W1L11B100 high-performance analog valve positioner (two stainless steel pressure gauges, NT3000 I/P module, nameplate marked EXPLOSION PROOF / INTRINSICALLY SAFE); similar order string XLL3W1L21B100-NT3002042SN1W00; rotary version Valtek XL90. Parameters come from official Flowserve data sheets and IOM and are for selection and spare-part reference only, not guaranteed values; digit interpretations are unpublished and are subject to nameplate / order or manufacturer confirmation.

If you have an XL series order string at hand, want to confirm whether it uses a P/P or NT3000 I/P module, how to check the pressure gauge configuration and Ex markings, or want to clarify the boundary with Logix digital positioners, please feel free to contact us. We can check the model and ordering information together against the nameplate, order and operating conditions.

Orders & Inquiries

Baoman Industrial Technology (Chengdu) Co., Ltd
Tel: +86 028-60220547 | Email: info@bit-cd.com
Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China

The information above is not guaranteed to remain valid at all times. Subsequent changes will not be notified separately. Please confirm the latest information at the time of inquiry.