| SAMSON 3277 Pneumatic Actuator - Technical Data & Selection | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Release time:2026-11-21 02:05:02 | Views: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The SAMSON Type 3277 is a widely used single-acting pneumatic diaphragm linear actuator in process industries. Its built-in compression spring provides a fail-safe action, and it accepts direct mounting of 3725 / 3730 series positioners, limit switches and position transmitters. This article covers its construction, core technical data, diaphragm area options and selection points, to help match the actuator specification to the valve in the field. I. Product Positioning
The 3277 and 3271 belong to the same SAMSON pneumatic diaphragm actuator family. The 3277 is designed for direct mounting of positioners / limit switches / position transmitters with precise, concealed linkage; the 3271 covers a larger diaphragm area range (120 cm2 up to 2x2800 cm2 in tandem). When specifying an actuator for a control valve, first calculate the required thrust from seat leakage class, differential pressure and spring range, then determine the diaphragm area and size. Source: SAMSON official brochure Type 3271 / Type 3277 pneumatic actuator chapter, data sheets T 8310-1 / T 8310-2 / T 8310-8 EN, spare parts list EL 8310-6 EN (Edition Aug 2020). Parameters are subject to the latest official data.
II. Construction and Working PrincipleThe 3277 is a single-acting diaphragm linear actuator: signal pressure entering the diaphragm chamber generates thrust on the diaphragm, directly driving the stem; when the signal pressure drops, the built-in compression spring returns the actuator to its fail-safe position. The rolling diaphragm design significantly reduces friction and hysteresis, making it suitable for modulating control. The action direction can be reversed internally (FA air-to-open / FE air-to-close), and the fail-safe position can be selected as stem extended or stem retracted.
When the positioner is integrated directly on the 3277, the connection from positioner output to the actuator diaphragm chamber is fixed. For NAMUR (IEC 60534-6) mounting, the signal pressure can be applied to either side of the diaphragm chamber, depending on the fail-safe action direction. Refer to positioner installation manual EB 8394 ZH for the specific air connections and switching plate settings. Source: SAMSON official brochure Type 3271 / Type 3277 chapter, T 8310-1 EN, EB 8394 ZH (3725 installation manual). III. Core Technical Data
The above are common brochure parameters for the 3277 / 3271 (source page PDF p.97 / printed p.96). The 3277 for direct accessory mounting starts at 120 cm2; larger areas (1000 / 1400 / 2800 cm2) of the 3271 are covered by T 8310-2 / T 8310-3 / T 8310-8. Specific values are subject to the corresponding data sheet and are not invented here. Source: SAMSON official brochure Type 3271 / Type 3277 technical data (PDF p.97), T 8310-1 / T 8310-2 / T 8310-8 EN. IV. Diaphragm Area and Size Comparison
Weight of the 3277 actuator (for areas 120 / 175v2 / 240 / 350 / 355v2 / 700 / 750v2 cm2) is approximately 3.2 / 10 / 9 / 12 / 19 / 26 / 40 kg; the stem thread is M30x1.5 throughout (M20x1.5 for the 120 and 175v2 cm2 versions with micro-flow valve). A larger diaphragm area gives higher output thrust but also increases air consumption and dimensions. Complete dimensions and weights are subject to official data sheets T 8048-21 / T 8310 series. Source: SAMSON official data sheets T 8048-21 (Table 9.2 / 13.1 / 13.2), T 8310 series, T 8310-1 EN. Data subject to the official manual. V. Positioner Integration and Travel MatchingThe 3277 accepts direct integration of 3725 / 3730 series positioners; mounting parts and feedback lever must be selected according to the rated travel. Taking direct mounting of the SAMSON 3725 positioner as an example, the standard configuration is feedback lever M (connecting pin at position 35).
Required supply pressure depends on the spring range and actuator action: for air-to-open (FA) it is typically the upper spring range limit + 0.2 bar (minimum 1.4 bar); for air-to-close (FE) the maximum signal pressure for tight shutoff is estimated from seat diameter, differential pressure and effective diaphragm area. The spring range is marked on the nameplate and the action is indicated by FA / FE. If data is unavailable, a rough estimate is upper spring limit + 1 bar; final values are subject to the official manual and actual tuning. Source: SAMSON 3725 installation manual EB 8394 ZH (travel table, supply pressure calculation), T 8310-1 EN. VI. Selection Guide & Common ModelsSelection guide: The 3277 follows the sequence "define action (FA air-to-open / FE air-to-close), calculate thrust and spring range from seat differential pressure, select diaphragm area and size, confirm travel and positioner mounting interface". The diaphragm area determines output thrust and must cover the force required to close the valve with margin; the travel must fall within the positioner adjustable range, otherwise change the feedback lever / pin position or select a larger size. Explosion protection and electrical certification are determined by the associated positioner (3725 / 3730 series); unavailable certification status and order identifiers are subject to the SAMSON official manual, nameplate and ordering tool and are not invented. Common models: 3277-5 (small size, direct mounting, 120 cm2 and below), 3277 (sizes such as 240 / 350 / 355 / 700 cm2); associated positioners are commonly the 3725 (basic intrinsically safe), 3730-3 (HART), 3730-4 (PROFIBUS PA) and the 3731 flameproof series. The related large-diaphragm model is the 3271 (120 cm2 to 2x2800 cm2). If you are specifying an actuator for a control valve, or want to confirm the 3277 diaphragm area, spring range and positioner mounting method, please feel free to contact us. We can check the actuator specification and order code together against your valve size, differential pressure and fail-safe requirement. Orders & InquiriesBaoman Industrial Technology (Chengdu) Co., LtdTel: +86 028-60220547 | Email: info@bit-cd.com Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China The information above is not guaranteed to remain valid at all times. Subsequent changes will not be notified separately. Please confirm the latest information at the time of inquiry. |

简体中文
ENGLISH
