Home » Service & Support » Technical Documentation
Masoneilan Series 37 / 38 Actuators - Technical Data & Selection
Release time:2026-11-21 02:05:02 | Views:

The Masoneilan Series 37/38 are spring-diaphragm actuators from Masoneilan (now part of Baker Hughes), commonly used to match rotary control valves such as eccentric rotary valves and listed as compatible in several positioner manufacturers' mounting data. This article covers the Series 37/38 positioning, technical-data framework and selection rules, and clearly distinguishes them from the Series 35 and 87/88. Note that the image in this section is a general Masoneilan product reference, not a Series 37/38-specific photo; all parameters are subject to the official manual and nameplate and are not inferred from the image.

I. Product Positioning

ItemDescription
BrandMasoneilan, now part of Baker Hughes
SeriesSeries 37 / 38 spring-diaphragm actuators
Construction typeLinear / spring-return (specific action per model and nameplate)
Typical matched valvesMasoneilan eccentric rotary valves (such as Camflex II) and other control valves
Compatible positionersMounting kits offered by several positioner manufacturers (see matching section)
Main manualMasoneilan Series 37/38 spring-diaphragm actuator instruction manual / actuator technical data; parameters subject to the official manual

The Series 37/38 appears alongside the Masoneilan 87/88 and Camflex II in third-party positioner mounting data, indicating its general role as an actuator for Masoneilan control valves. For example, SAMSON positioner mounting kits list an order number for MASONEILAN 87/88 / 37/38, and azbil positioner bracket lists include a Masoneilan 37/38 / Camflex II bracket code. Such cross-references only illustrate matching relationships and do not replace the parameters in the official brochure.

Source: Masoneilan Series 37/38 spring-diaphragm actuator instruction manual / actuator technical data; cross-references in SAMSON and azbil positioner mounting data. Specific parameters are subject to the Masoneilan official manual.

Masoneilan product reference
Masoneilan product image, for selection reference only

II. Technical Data Framework

Technical data for the Series 37/38 must be taken from the official manual and nameplate. The table below lists the items to verify against official data; this section does not fill in unverified values.

Parameter itemDescription
Construction typeSpring-diaphragm type; specific model per nameplate
ActionAir-to-open / air-to-close determined by spring and signal direction, per model
Effective diaphragm areaPer official selection table (not invented here)
Spring rangePer official selection table (not invented here)
Rated travelPer official selection table (not invented here)
Output thrustPer official selection table (not invented here)
Maximum supply pressurePer official manual / nameplate
Signal portPer official manual / nameplate
Operating temperatureDepends on diaphragm and seal materials, per official manual
Optional accessoriesHandwheel, travel stop, positioner bracket, as ordered

Source: Masoneilan official manual for Series 37/38 actuators. Specific values for the above items are not available from citable official data in this section and are all subject to the official manual / nameplate; nothing is invented.

III. Construction & Working Principle

As spring-diaphragm actuators, the Series 37/38 work like similar products: signal pressure acting on the effective diaphragm area produces thrust that moves the stem and valve stem; the spring supplies return force and fail-safe force; when diaphragm thrust balances spring force and stem unbalanced force, the stem holds the corresponding opening. On loss of air, the spring drives the actuator to the safe position.

AssemblyFunction
Diaphragm assemblyConverts pneumatic signal into stem thrust
Spring assemblySupplies return force and fail-safe reset on air loss
Stem and yokeConnects to the valve stem and transmits linear displacement
Positioner interfaceMounts the positioner and feedback arm to form a position closed loop

Specific construction dimensions, diaphragm material and spring configuration are subject to the Masoneilan official manual drawings and are not inferred from the appearance reference image.

Source: general working-principle data for Masoneilan spring-diaphragm actuators. Series 37/38 construction is subject to the official manual.

IV. Selection & Matching Rules

1. Confirm the matched valve first: the Series 37/38 commonly matches Masoneilan eccentric rotary valves and other control valves; determine required thrust and travel from valve type and size. 2. Set the action: choose air-to-open / air-to-close by process fail-safe requirement and verify the spring range. 3. Check positioner mounting: positioner manufacturers offer dedicated mounting kits for the 37/38; SAMSON data includes an order number for MASONEILAN 87/88 / 37/38 (TGX:16152-1210 / -1215), and azbil data includes a Masoneilan 37/38 / Camflex II bracket code (MA-MH series). Verify the correct bracket for the chosen positioner model. 4. Distinguish similar series: the 37/38, 35 and 87/88 are different specification families whose thrust, dimensions and spares are not interchangeable.

The above mounting-kit codes come from third-party positioner mounting data and only show that the 37/38 is widely adaptable; they do not corroborate the actuator's own parameters. Specific matching and ordering are subject to the Masoneilan official brochure and the chosen positioner's official mounting manual.

Source: SAMSON positioner mounting kit data (including the MASONEILAN 87/88 / 37/38 mounting kit); azbil positioner bracket list (including the Masoneilan 37/38 / Camflex II bracket code). Matching is subject to the respective official manuals.

V. Selection Guide & Common Models

Selection guide: the Series 37/38 follows the sequence "thrust and travel first, action and spring range second, positioner mounting accessories last". First determine required thrust and rated travel from the valve type and duty; then set action and spring range by the fail-safe requirement; then verify the 37/38 mounting bracket for the chosen positioner; finally check air quality and pressure. Because no official parameter table for the 37/38 was available to this article, all specific values are subject to the official manual and nameplate, and no unverified figures are given here.

Common models: Masoneilan Series 37 and Series 38 spring-diaphragm actuators, commonly matched with eccentric rotary valves (such as the Camflex II) and other control valves. They are different specification families from the 35 and 87/88, whose parameters and spares are not interchangeable; specific specification codes are subject to the official ordering table.

If you are specifying an actuator for a control valve, or want to verify the matching of a Series 37/38 actuator with the valve body and positioner bracket, please feel free to contact us. We can review the actuator size and mounting accessories together against your valve type, size, thrust and fail-safe requirement.

Orders & Inquiries

Baoman Industrial Technology (Chengdu) Co., Ltd
Tel: +86 028-60220547 | Email: info@bit-cd.com
Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China

The information above is not guaranteed to remain valid at all times. Subsequent changes will not be notified separately. Please confirm the latest information at the time of inquiry.