Home » News Center » Product Arrival Display
Fisher DVC7K Smart Valve Positioner HART 7 - Arrival & Data
Fisher DVC7K Smart Valve Positioner HART 7 - Arrival & Data
Fisher DVC7K Smart Valve Positioner HART 7 - Arrival & Data
Fisher DVC7K Smart Valve Positioner HART 7 - Arrival & Data
Fisher DVC7K Smart Valve Positioner HART 7 - Arrival & Data

Fisher DVC7K Smart Valve Positioner HART 7 - Arrival & Data

Details

Baoman Industrial Technology (Chengdu) Co., Ltd. has recently received the Emerson Fisher DVC7K smart valve positioner (HART 7). The DVC7K-H is a next-generation Fisher FIELDVUE Digital Valve Controller that converts a 4-20 mA input signal into a pneumatic output to drive the actuator. It uses linkage-less non-contact position feedback, a two-stage pneumatic design and HART 7 communication, and is one of the official discontinued replacements for the DVC6000 series and DVC6200 HW1. The knowledge base contains a dedicated technical compilation based on the original Product Bulletin D104765X012 together with several selection and discontinued-replacement records that corroborate each other; the specifications below are taken from the original-manufacturer data compiled in the knowledge base, for selection and spare-part verification. The arrival note gives only the base model DVC7K and HART 7, without the full 18-field ordering code, so the specific configuration is subject to the nameplate / purchase order or the official manual.

I. Arrival Photos

Fisher FIELDVUE DVC7K smart valve positioner, HART 7 (next-generation digital valve controller) arrival photo 1
Arrival photo (taken by Baoman Industrial, watermarked, serial information redacted)

Fisher FIELDVUE DVC7K smart valve positioner, HART 7 (next-generation digital valve controller) arrival photo 2
Arrival and unboxing detail (taken by Baoman Industrial)

Fisher FIELDVUE DVC7K smart valve positioner, HART 7 (next-generation digital valve controller) arrival photo 3
Arrival and unboxing detail (taken by Baoman Industrial)

Fisher FIELDVUE DVC7K smart valve positioner, HART 7 (next-generation digital valve controller) arrival photo 4
Arrival and unboxing detail (taken by Baoman Industrial)

Fisher FIELDVUE DVC7K smart valve positioner, HART 7 (next-generation digital valve controller) arrival photo 5
Arrival and unboxing detail (taken by Baoman Industrial)

II. Brand & Model

ItemSpecification
BrandFisher (Emerson FIELDVUE digital valve controller product line)
ModelFIELDVUE DVC7K (DVC7K-H, HART 7 digital valve controller)
PositioningNext-generation smart electro-pneumatic valve positioner for control and on/off valves; converts a 4-20 mA input to a pneumatic output, with linkage-less non-contact position feedback, two-stage instrument design, NE 107 health indication and a six-key multilingual LUI (including Chinese)
Generation distinctionThe DVC7K is a next-generation platform and one of the official discontinued replacements for the DVC6000 series and DVC6200 HW1; DVC6200 HW2 is the current in-production version; DVC2000 is an entry-level HART 5, 7 bar product. The DVC7K offers HART 7, up to 10 bar, linkage-less feedback and -40 to +85 degC
Arrival designationOnly DVC7K and HART 7 are marked; the full 18-field ordering code (communication / approval / housing / temperature / connections / I/O / LUI / pneumatic action / Bluetooth / control tier / power / language / conduit / additional options) was not supplied with the goods and is subject to the nameplate / purchase order
Source statusThe knowledge base contains a dedicated technical compilation based on the Fisher official DVC7K Product Bulletin D104765X012 (December 2024, Table 1 Specifications and Table 2 Product Selection Matrix), corroborated by several selection and replacement records

III. Technical Data

The specifications below are taken from the knowledge-base document "Fisher DVC7K Technical Data and Selection Rules" (entry_id ea6b03b6b06f48ce9102aa7f5fec4da0, Product Selection Rules space), based primarily on the Fisher official "DVC7K Product Bulletin", document no. D104765X012 (December 2024; Table 1 Specifications and Table 2 Product Selection Matrix), with the generational relationship to the DVC6200 / DVC2000 cross-checked against the knowledge-base documents "FISHER Valve Positioner Product Selection" and "FISHER Discontinued Product Replacement Cross-Reference". As the DVC7K is a relatively new model, items not listed item by item in the official materials or not supplied with the arrival are flagged honestly and are subject to the nameplate / purchase order or the official manual, with no values assumed.

ItemSpecification
Communication protocolHART 7 (ordering field 1 = 1H); 4-20 mA DC analogue input (nominal), supports split-ranging
Electrical dataMinimum terminal voltage: 10.2 V DC for analogue control / 10.7 V DC for HART communication; maximum 30 V DC with overcurrent and reverse-polarity protection; input impedance approx. 550 ohms (approx. 11 V at 20 mA)
Pneumatic outputPneumatic signal up to full supply pressure; maximum travel span 9.5 bar / 140 psig; actions: double-acting / single-acting direct / single-acting reverse
Air supply requirementsMaximum 10.0 bar / 145 psig or the actuator rating, whichever is lower; minimum recommended 0.3 bar / 5 psig above the actuator maximum requirement; clean, dry, non-corrosive medium per ISA 7.0.01 / ISO 8573-1
Independent linearityTypical ±0.5% of output span (not applicable for travel < 19 mm / 0.75 in, rotation < 60 deg, or long-travel applications)
Air consumption and output capacitySteady-state consumption: < 0.38 standard m3/h (14 scfh) at 1.4 bar / 20 psig, < 1.3 standard m3/h (49 scfh) at 5.5 bar / 80 psig; maximum output capacity: 10.0 standard m3/h (375 scfh) at 1.4 bar, 29.5 standard m3/h (1100 scfh) at 5.5 bar
Operating temperatureStandard -40 to +85 degC (with nitrile); extreme-temperature option -45 to +85 degC (with fluorosilicone); high-temperature option -40 to +85 degC; note: the LUI may be unreadable below -20 degC
Position feedbackLinkage-less non-contact position feedback: eliminates physical contact between the valve stem and the instrument, no wear, maximised cycle life, fewer mounting parts and less complexity
Materials of constructionHousing/front cover: copper-free die-cast aluminium EN AC-43400 / EN AC-AlSi10Mg(Fe); LUI cover: polycarbonate; elastomers: silicone (ambient) / nitrile (internal, standard temperature) or silicone (ambient) / fluorosilicone (internal, extreme temperature)
Enclosure and EMCElectrical enclosure cCSAus Type 4X, IP66; ATEX IP66; IECEx IP66; EMC per EN IEC 61326-1:2021 (emission Class A); vibration per ANSI/ISA-S75.13.01 section 5.3.5
Hazardous-area approvalscCSAus (intrinsic safety / explosionproof / dust ignition protection / increased safety, Class/Div/Zone), ATEX, IECEx, NEPSI (China, Pending); not all approvals apply to all constructions, and the specific nameplate marking and Emerson/Fisher official confirmation govern
Actuator compatibility and mountingLinear travel 6.35 mm (0.25 in) to 606 mm (23.375 in); rotary 45 to 180 deg (180 deg requires a special mounting kit); direct mounting to Fisher 657i / 667i or GX actuators; compatible with IEC 60534-6-1 / 6-2, VDI/VDE 3845 and NAMUR mounting standards
ConnectionsSupply pressure: 1/4 NPT female or G1/4, with integral mounting pad for a 67CFR regulator; output pressure: 1/4 NPT female or G1/4; tubing recommended 3/8 in; exhaust: 1/2 NPT female; electrical: 1/2 NPT female or M20
Weight and optionsAluminium approx. 3.9 kg / 8.9 lb; options include integral filter regulator, low-bleed relay, extreme / high temperature, integral 4-20 mA position transmitter, integral switches and external exhaust; the full 18-field ordering code was not supplied with the arrival and is subject to the nameplate / purchase order

Sources: the knowledge-base document "Fisher DVC7K Technical Data and Selection Rules" (entry_id ea6b03b6b06f48ce9102aa7f5fec4da0, Product Selection Rules space), based primarily on the Fisher official "DVC7K Product Bulletin" D104765X012 (December 2024, Table 1 Specifications and Table 2 Product Selection Matrix), from which the specifications and the 18-field selection matrix were transcribed item by item. The generational and discontinued-replacement relationships are cross-checked against the knowledge-base documents "FISHER Valve Positioner Product Selection" (entry_id be5bf70154fb44b996150bfa15eba4ee, with the DVC2000 / DVC6200 / DVC6200 SIS comparison and the HW1 discontinuation note), "FISHER Discontinued Product Replacement Cross-Reference" (entry_id 455429c44759455c90cbe2ff7034557c, official replacements DVC7K or DVC6200) and the "FISHER Price List" (entry_id a78472b6753c40c880dc74736808fae0, DVC7K stock / forward-order entries). The knowledge base already contains a dedicated technical compilation with the official manual number, forming a complete source, so no online search was performed. The arrival gives only the base model DVC7K without the full 18-field ordering code, which is subject to the nameplate / purchase order or the official manual; as the DVC7K is a relatively new model, items not listed in the available materials are not assumed.

IV. Related Models

ItemSpecification
DVC6200 / DVC6200 HW2The previous-generation mainstay digital valve controller (HART 5/7, FF, PROFIBUS PA) with Hall-effect non-contact feedback and up to 10 bar; HW1 is discontinued and HW2 is the current in-production version, with the official replacement being DVC7K or DVC6200. A different platform from the DVC7K
DVC2000Entry-level digital valve controller: HART 5, single-acting, four-key LUI + LCD, up to 7 bar, -40 to +80 degC; a different position from the DVC7K (HART 7, 10 bar, linkage-less feedback, six-key LUI)
DVC6200 SISSafety-instrumented-system version: HART 5 (HART 7 optional), PST partial-stroke testing, exida-certified SIL3; no SIS version of the DVC7K appears in the available materials, so safety duties must be confirmed separately with Emerson
DVC6000 seriesThe discontinued (2013) previous-generation digital valve controller, officially replaced by DVC7K or DVC6200; legacy retrofits require compatibility confirmation with Emerson sales / technical support
Fisher 657i / 667i / GX actuatorsThe actuator platforms on which the DVC7K can be directly mounted, with an integral mounting pad for a 67CFR filter regulator; selection requires checking the actuator action (single / double) and travel

V. Selection Guide & Common Models

Selection guide:Selection starts with the generation and protocol: this arrival is the next-generation DVC7K (HART 7, up to 10 bar, linkage-less non-contact feedback, -40 to +85 degC), an official discontinued replacement for the DVC6000 series and DVC6200 HW1; it must not be confused with the current DVC6200 HW2 or the entry-level DVC2000. Then check the application against the 10 bar supply ceiling, 9.5 bar travel span, single / double action, ±0.5% independent linearity, steady-state air consumption and actuator compatibility (linear 6.35 to 606 mm, rotary 45 to 180 deg). For hazardous areas, verify the applicability of cCSAus / ATEX / IECEx / NEPSI against the specific Ex marking, noting that NEPSI is still Pending. The arrival gives only the base model DVC7K; the full 18-field ordering code (communication, approval, housing, temperature, connections, I/O, LUI, pneumatic action, pneumatic block, Bluetooth, control tier, power, language, conduit connections, additional options) is subject to the nameplate / purchase order or the official manual. Please feel free to inquire for an item-by-item check against your valve and actuator.

Common models:This arrival: the Fisher FIELDVUE DVC7K smart valve positioner (digital valve controller, HART 7). Parameters come from the knowledge-base compilation of the Fisher official DVC7K Product Bulletin D104765X012, for selection and spare-part verification only, not guaranteed values. The specific configuration, full ordering code and approval markings are subject to the nameplate / purchase order or the official manual, and items not listed in the available materials are not assumed. It is strictly distinct from the DVC6200 and DVC2000.

These are some of the configurations we supply regularly. If you are working through a selection, or would like to know about availability of these models, feel free to get in touch — we can look at the right combination together based on your operating conditions.

Disclaimer: The information above is not guaranteed to remain valid and may be modified without separate notice. Please confirm the latest information at the time of inquiry.

Ordering & Inquiry

The photos above show the models currently in stock. If you are working through a similar selection, or would like to know more about a model's configuration and availability, feel free to get in touch — we can look at the right combination together based on your valve type and signal requirements.
Tel: +86 028-60220547  |  Email: info@bit-cd.com
Baoman Industrial Technology (Chengdu) Co., Ltd   Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China

Application area