SAMSON SAM-33 Electric Actuator - Arrival & Data
Baoman Industrial Technology (Chengdu) Co., Ltd. has recently received the SAMSON Type SAM-33 electric valve actuator. The SAM-33 belongs to the SAM-30 to SAM-33 group of the SAMSON Type SAM electric actuator family (SAM-01 to SAM-52); it is a linear electric actuator with 15 kN thrust, 60 mm rated travel and an M60 x 1.5 actuator-stem thread. The knowledge-base purchasing record (2026-07-14, "SAMSON SAM-33 220V, actuator") corroborates the 220 V marking on the received goods, corresponding to the official 230 V AC supply version. The SAM-33 is an electric actuator and is completely different from the SAMSON 3277/3271/3379 pneumatic diaphragm or piston actuators and from the 3730/3277 pneumatic positioner system; these must not be confused. The knowledge base contains only a purchasing record and a SAMSON product overview, with no dedicated technical page for the SAM-33, so the technical data below are from an online search of official SAMSON documents; the source is an online source, with attribution given below, and the parameters are for selection verification only.
I. Arrival Photos

Arrival photo (taken by Baoman Industrial, watermarked, serial information redacted)

Arrival and unboxing detail (taken by Baoman Industrial)

Arrival and unboxing detail (taken by Baoman Industrial)

Arrival and unboxing detail (taken by Baoman Industrial)

Arrival and unboxing detail (taken by Baoman Industrial)
II. Brand & Model
| Item | Specification |
|---|---|
| Brand | SAMSON (SAMSON AG, Germany, founded in Frankfurt in 1907; an independent group brand, not acquired) |
| Model | Type SAM-33 electric actuator (SAM-30 to SAM-33 group, linear type); official data sheet T 8330 EN / mounting and operating instructions EB 8330 EN |
| Positioning | Linear electric actuator for industrial applications, suited to SAMSON Series 240/250/280 control valves and the Type 3284 steam conditioning valve, with a family travel range of 15 to 120 mm; the motor converts output pulses of a three-step controller into steps of travel and a gear-and-threaded-bushing arrangement turns rotary motion into linear stem movement |
| Difference from pneumatic series | The SAM-33 is an electric actuator (motor plus gearing plus electrical limit and torque switches) and needs no instrument air; the 3277/3271/3379/3278 are pneumatic diaphragm or piston actuators and the 3730/3725/3731 are electropneumatic positioners — different product categories whose specifications must not be interchanged |
| Arrival designation | The arrival note marks "SAM-33 220V", corresponding to the official 230 V AC (+/-10 %) 50/60 Hz single-phase mains version; three-phase 400 V, 110 V, 24 V AC and 24 V DC are other available versions. The complete ordering configuration is subject to the nameplate / purchase order |
| Source status | The knowledge base has no dedicated technical page for the SAM-33 (only a purchasing record, entry_id a9d9ab0f051447ca99f6ac7e74d261b1, and a SAMSON product overview, entry_id c7b90ed0a8df460da3975ad547addb8b, which lists the electric types 5827/5857/3374); the technical data are taken from the official data sheet T 8330 EN and EB 8330 EN found through an online search, i.e. an online source |
III. Technical Data
This data is from an online search: the official SAMSON data sheet "Type SAM Electric Actuator, T 8330 EN" (Edition May 2023, URL https://www.samsongroup.com/document/t83300en.pdf; Table 3 mechanical and general data, Tables 4/7/11 supply and power consumption, Table 13 dimensions, Ordering text) and the official mounting and operating instructions "EB 8330 EN" (URL https://www.samson.de/document/e83300en.pdf; ambient temperature -20 to +60 degrees C, protection and installation requirements). Internal knowledge-base items are used only for cross-checking: a purchasing record (entry_id a9d9ab0f051447ca99f6ac7e74d261b1, 2026-07-14, "SAMSON SAM-33 220V", two actuators) corroborates the model and voltage, and the "SAMSON Product Overview" (entry_id c7b90ed0a8df460da3975ad547addb8b) corroborates the brand ownership. The specific ordering configuration of the SAM-33 (voltage version, stroking speed, control type and additional electrics) is subject to the nameplate and purchase order delivered with the goods; items not listed in the available documents are flagged honestly; no values are assumed.
| Item | Specification |
|---|---|
| Model group and thrust | Part of the Type SAM family, SAM-30 to SAM-33 group; the SAM-33 has a thrust of 15 kN (SAM-30/31/32 in the same group: 6/8/12 kN; family range 2 to 25 kN). This data is from an online search, source T 8330 EN Table 3 |
| Rated travel | The SAM-30 to SAM-33 group has a rated travel of 60 mm (family range 15/30/60/120 mm); no mechanical travel stops, travel set by electrical limit switches, and the stem is protected against rotation by a tongue-and-groove arrangement |
| Supply voltage | The 220 V marking on the received goods corresponds to the official 230 V AC (+/-10 %) 50/60 Hz (+/-5 %) version; other versions are 400 V AC (+/-10 %), 110 V AC (+/-10 %), 24 V AC (+/-10 %) for single- or three-phase operation and 24 V DC. Class of protection per EN 61140: class I for AC supply and class III for DC supply |
| Stroking speed and power consumption | The 230 V AC version of the SAM-33 is available at 13.5 / 22 / 40 mm/min with maximum power consumption of 25.3 / 51.8 / 323.4 VA (T 8330 EN Table 7); the 24 V DC version offers 25 / 60 mm/min at 26.5 / 64.8 VA (Table 11). Speeds are based on a 50 Hz supply and are about 20 % higher at 60 Hz, and vary with the load; actuators with a positioner draw 1.8 W more |
| Control type | Two versions: three-step (the motor converts controller output pulses into steps of travel, with step length and rotation direction determined by the magnitude and sign of the control deviation) or a version with positioner (PEL 100/PEL 200, input and output signals 0/4 to 20 mA or 0/2 to 10 V). Single-phase or multi-phase operation is possible, as is DC operation; a brake motor is offered for the three-step version only and is not available with 24 V DC |
| Protection and environment | IP65 per EN 60529; permissible ambient temperature -20 to +60 degrees C (EB 8330 EN); optional terminal-compartment heating resistor of 24/110/230 V (AC/DC), 15 W with temperature monitor; cable entry by two M16 x 1.5 or two M20 x 1.5 cable glands plus one blanking plug depending on the size group, subject to the actual SAM-33 unit |
| Motor and duty type | Standard surface-cooled squirrel-cage motor; synchronous or asynchronous motor depending on the stroking speed, with an asynchronous motor with brake for three-step versions; duty type S1-100 % or intermittent periodic duty S3/S4; temperature monitoring is generally not required and a bimetallic switch is available on request depending on the model |
| Mechanical design and manual operation | Motor rotation is transmitted through gearing to a gear wheel shrunk on a bush with female thread, into which the male-threaded top of the actuator stem screws to produce a lifting linear motion; after decoupling the motor, the stem can be moved manually with a side-mounted handwheel; any mounting position except suspended |
| Built-in limits and feedback options | Two torque-dependent changeover switches DE (S1 and S2, max. 250 V AC) and three travel-dependent changeover switches WE (S3/S4/S5, with S6 indication switch optional) are installed; contact load max. 5 A at cos phi = 1, max. 3 A at cos phi = 0.8 and max. 2 A for light bulbs. Options include a position transmitter ESR (18 to 30 V DC, 0/4 to 20 mA), one or two resistance transmitters POT (100/200/1000/2000 ohm), an additional travel switch, terminal-compartment heating and an integrated reversing contactor for multi-phase operation |
| Mounting connection | Actuator-stem thread M60 x 1.5 (shared by the SAM-30 to SAM-33 and SAM-40 to SAM-42 groups), suited to 22 mm stem ends; mounting kit order no. 1400-9565 (one M60 x 1.5 castellated nut, two SS304 clamps for 22 mm stem ends and two M12 x 35 SS304 screws); other versions on request |
| Dimensions (SAM-30 to SAM-33) | Rated travel 60 mm; H 334 mm (357 with positioner), H1 54, H2 min 105, H2 max 165, H3 174 mm (197 with positioner), diameter D 188, diameter D1 22, diameter P 140, t 62 and h 15 mm (T 8330 EN Table 13) |
| Weight and electrical protection | The data sheet lists weights of approx. 8 / 13 / 19 kg by size group without mapping them individually to the SAM-33; the actual weight is subject to the nameplate / data sheet delivered with the goods. Fuse protection: 250 mA for 230 V and 1 A for 24 V; potentiometer load max. 1.5 W and sliding contact current max. 30 mA |
This data is from an online search (the knowledge base has no dedicated technical page for the SAM-33): (1) the official SAMSON data sheet T 8330 EN, "Type SAM Electric Actuator", Edition May 2023, source URL https://www.samsongroup.com/document/t83300en.pdf, from which thrust, travel, voltage, speed, power consumption, protection, control type, dimensions and ordering text are taken (Tables 3, 4/7/11, 12, 13 and Ordering text); (2) the official SAMSON mounting and operating instructions EB 8330 EN, source URL https://www.samson.de/document/e83300en.pdf, from which the ambient temperature of -20 to +60 degrees C and installation requirements are taken. Knowledge-base cross-checks: a purchasing record (entry_id a9d9ab0f051447ca99f6ac7e74d261b1, 2026-07-14, "SAMSON SAM-33 220V", two actuators, 14-16 week lead time) and the "SAMSON Product Overview" (entry_id c7b90ed0a8df460da3975ad547addb8b). The two official documents agree on the 60 mm travel and voltage options for the SAM-30 to SAM-33 group. Items not listed or marked pending in the available documents are flagged honestly and are subject to the nameplate / purchase order; no values are assumed.
IV. Related Models
| Item | Specification |
|---|---|
| SAM-30 / SAM-31 / SAM-32 | In the same group as the SAM-33, all with 60 mm travel and M60 x 1.5 mounting, with thrusts of 6 / 8 / 12 kN respectively; the SAM-33 is the highest in the group at 15 kN. Source T 8330 EN Table 3 |
| SAM-20 to SAM-23 | The smaller size step in the Type SAM family, with 30 mm rated travel, M30 x 1.5 stem thread and 6 to 15 kN thrust; different from the 60 mm / M60 x 1.5 of the SAM-33, so mounting parts are not interchangeable. Source T 8330 EN Tables 3 and 13 |
| SAM-40 to SAM-42 / SAM-50 to SAM-52 | Higher thrust steps: 15/20/25 kN with 60 mm, M60 x 1.5 and diameter D 216 for the former; 15/20/25 kN with 120 mm, M100 x 2 and diameter D 216 for the latter. Both are electric like the SAM-33 but differ in size and connecting parts. Source T 8330 EN |
| Type 5827 / 5857 / 3374 electric actuators | Another class of SAMSON electric actuators for HVAC and process engineering (230 V/24 V, 50 Hz, 300 to 5000 N thrust, 6 to 30 mm travel), documented in the knowledge base (entry_id ba85beb3493a4548a00fb0902321818b); different from the Type SAM family, so specifications must not be interchanged |
| 3277 / 3271 / 3379 / 3278 pneumatic actuators | Pneumatic diaphragm or piston actuators of the same brand that require instrument air and an electropneumatic positioner; the SAM-33 is an electric actuator requiring no air supply, and the two must not be confused (SAMSON Product Catalog k00200en) |
| TROVIS 5724 / 5725 / 5757 electric actuators with process controller | Electric actuator series with an integrated digital process controller, functionally different from the three-step or positioner versions of the Type SAM family; where local PID control is needed, these should be checked separately (SAMSON Product Overview, entry_id c7b90ed0a8df460da3975ad547addb8b) |
V. Selection Guide & Common Models
Selection guide:Selection starts with the power form: the SAM-33 is an electric linear actuator needing no instrument air; where a pneumatic diaphragm or piston actuator is required, choose the 3277/3271/3379 with a separate positioner and do not confuse it with the SAM-33. Then check thrust and travel against the valve: the SAM-33 offers 15 kN thrust and 60 mm travel (SAM-30/31/32 in the same group: 6/8/12 kN; family range 2 to 25 kN), and confirm that the M60 x 1.5 stem thread, 22 mm clamps and mounting kit 1400-9565 match the application. Next choose the voltage version for the site supply: the 220 V marking on the received goods corresponds to 230 V AC, 50/60 Hz, with 400 V/110 V/24 V AC and 24 V DC also available; for three-phase or DC supply, check whether an integrated reversing contactor is needed. Then set the control type: three-step (switching pulses) or a version with PEL 100/PEL 200 positioner (4-20 mA/0-10 V); a brake motor is available for the three-step version only and not with 24 V DC. Also verify the stroking speed of 13.5 / 22 / 40 mm/min (230 V AC) and the power consumption, IP65, -20 to +60 degrees C, whether terminal-compartment heating is needed, and the additional electrics such as torque/travel switches and a position transmitter or potentiometers. The above data are from the official data sheet T 8330 EN and EB 8330 EN obtained through an online search; the specific configuration is subject to the nameplate and purchase order delivered with the goods and to the official data sheet, and items not listed in the available documents are not assumed. Please feel free to inquire for an item-by-item check against your valve and service conditions.
Common models:This arrival: the SAMSON Type SAM-33 electric valve actuator (SAM-30 to SAM-33 group of the Type SAM family, 15 kN / 60 mm, with the arrival marking 220 V corresponding to 230 V AC), an electric actuator and not part of the 3277/3271 pneumatic series. This data is from an online search, sourced from the official SAMSON data sheet T 8330 EN and EB 8330 EN, for selection and spare-part verification only, not guaranteed values. The specific configuration is subject to the nameplate / purchase order or the official data sheet, and items not listed in the available materials are not assumed.
These are some of the configurations we supply regularly. If you are working through a selection, or would like to know about availability of these models, feel free to get in touch — we can look at the right combination together based on your operating conditions.
Disclaimer: The information above is not guaranteed to remain valid and may be modified without separate notice. Please confirm the latest information at the time of inquiry.
Ordering & Inquiry
Baoman Industrial Technology (Chengdu) Co., Ltd Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China

简体中文
ENGLISH
