Neles ND9206 / ND9203 / ND7202 Smart Valve Positioner - Arrival & Data
Baoman Industrial Technology (Chengdu) Co., Ltd. has recently received the Neles ND9206HXTC / ND9203HXTC / ND7202HXTC digital valve positioners. Of the three order codes in this arrival, the ND9206HXTC and ND9203HXTC belong to the ND9000 series (the previous-generation top-tier intelligent valve controller with advanced diagnostics), while the ND7202HXTC belongs to the ND7000 series (a basic-level digital valve controller with basic diagnostics); the two generations must not be interchanged. The Neles intelligent valve positioner business now belongs to Valmet Flow Control, so selection and inquiries should be handled under Valmet / Neles rather than the former Metso brand. Purchase records for this arrival also carry an "-A1 rotary connection kit" suffix, which is a mounting accessory. The specifications below are taken from the official Valmet/Neles bulletins 7ND9021EN and 7ND720EN and the Chinese/English technical compilations recorded in the knowledge base, for selection and spare-part verification only.
I. Arrival Photos

Arrival photo (taken by Baoman Industrial, watermarked, serial information redacted)

Arrival and unboxing detail (taken by Baoman Industrial)

Arrival and unboxing detail (taken by Baoman Industrial)

Arrival and unboxing detail (taken by Baoman Industrial)

Arrival and unboxing detail (taken by Baoman Industrial)
II. Brand & Model
| Item | Specification |
|---|---|
| Brand | NELES (formerly the Metso intelligent valve positioner line, now part of Valmet Flow Control) |
| Models | ND9206HXTC / ND9203HXTC (ND9000 series); ND7202HXTC (ND7000 series); purchase records also carry an -A1 rotary connection kit |
| Positioning | Loop-powered 4-20 mA microprocessor-based digital valve controllers for linear and rotary control valves with single- or double-acting actuators; HART communication, internal position transmitter and polar-temperature option |
| Generational difference (key) | The ND9000 is the previous-generation top-tier model with advanced diagnostics (online, performance, valve signature) and HART/FF/PA communication options; the ND7000 is a basic-level model with basic self-diagnostics and offline tests, HART only. They must not be interchanged |
| Differences among the three models | ND9206HXTC and ND9203HXTC share the ND9000 Ex d enclosure, HART, X approval, position transmitter and polar-temperature option; they differ in the 4th-position spool capacity: 06 = high capacity (actuator swept volume >3 dm3), 03 = medium capacity (1-3 dm3). The ND7202HXTC is an ND7000-series unit with 4th-position 02 = low capacity (<1 dm3) |
| Arrival designation | Purchase records dated 2026-05-20 for "ND9206HXTC-A1 rotary connection kit", "ND9203HXTC-A1 rotary connection kit" and "ND7202HXTC-A1 rotary connection kit" corroborate this arrival; -A1 is a rotary mounting kit and does not change the positioner body model |
| Source status | Digit-by-digit decoding follows the official bulletins' How to Order tables. The exact Ex marking and temperature class depend on the approval code and are subject to the nameplate and certificates; intrinsically safe Ex ia and flameproof Ex d are not mixed on this page |
III. Technical Data
Model decoding is based on the official Valmet/Neles bulletins: the ND9000 series datasheet 7ND9021EN (10/2020) and the How to Order tables in the knowledge-base documents "NDX and ND9000 Intelligent Valve Controller Technical Summary" and "07_Intelligent Positioners and Valve Controllers"; the ND7000 series is based on the official manual 7ND720EN-10/2020 and the knowledge-base document "Neles ND7000 Technical Data and Model Rules". Brand ownership follows the knowledge-base document "Summary of Sub-brands and Main Products of Major Industrial Groups"; the arrival models and -A1 accessory follow knowledge-base purchase records. Ordering suffixes and certification details not listed in the bulletins are flagged and are subject to the nameplate / purchase order, with no values assumed.
| Item | Specification |
|---|---|
| ND9000 digit-by-digit decoding | Taking ND9206HXTC as the example: ND = digital valve controller; 9 = Series 9000 (VDI/VDE 3845 mounting face); 2 = flameproof Ex d enclosure IP66/NEMA 4X; 06 = high-capacity spool (>3 dm3, 1/4 NPT); H = 4-20 mA + HART; X = ATEX + IECEx hazardous-area approval; T = internal two-wire passive position transmitter; C = polar-temperature option (-53 to +85 C) |
| ND9203HXTC digit difference | Identical to the ND9206HXTC except for the 4th position: 03 = medium-capacity spool (actuator swept volume 1-3 dm3), pneumatic port also 1/4 NPT; all other positions 2/H/X/T/C retain the same meanings |
| ND7202HXTC digit-by-digit decoding | ND = digital valve controller; 7 = Series 7000; 2 = flameproof Ex d enclosure IP66/NEMA 4X with 1/4 NPT pneumatic port and M20x1.5 cable entry; 02 = low-capacity spool (<1 dm3); H = 4-20 mA + HART; X = ATEX + IECEx approval; T = internal two-wire passive position transmitter; C = polar-temperature option (-53 to +85 C) |
| Approval code X and the Ex red line | The bulletin lists for the ND9200 both Ex ia/ib/ic/ec/nA intrinsically safe and Ex d flameproof ATEX/IECEx approvals; X is the ATEX + IECEx approval code, and the exact protection concept, gas group and temperature class are subject to the nameplate and Ex certificate. Intrinsically safe Ex ia IIC T4/T6 and flameproof Ex d IIC T6/T4 are different protection concepts and are not mixed on this page |
| Working principle and measurements | A 32-bit microcontroller controls valve position and runs self-diagnostics; measured variables are input signal, contactless valve position, actuator pressure (two independent channels), supply pressure, spool position and device temperature; suitable for linear and rotary valves with single- or double-acting actuators |
| Air supply and air quality | Supply pressure 1.4-8 bar (20-115 psi); 10% inlet pressure change affects position by <0.1%; air quality per ISO 8573-1: solids Class 5 (3-5 micron filtration recommended), humidity Class 1 (dew point 10 C below minimum ambient), oil Class 3 (<1 ppm) |
| Spool capacity and air consumption | At 4 bar supply: 02/low 5.5 Nm3/h, 03/medium 12 Nm3/h, 06/high 38 Nm3/h; steady consumption 02 and 03 <0.6 Nm3/h, 06 <1.0 Nm3/h - this is the core selection basis between the 06 and 03 versions |
| Control performance | Dead band <=0.1%; hysteresis <0.5% (medium constant-load actuator); temperature effect on position 0.5%/10 K; vibration effect <1% (2 g, 5-150 Hz) |
| Temperature and enclosure | Standard -40 to +85 C; polar version -53 to +85 C (the C option on this arrival); enclosure IP66 / NEMA 4X; the ND9200 enclosure is anodized aluminium with tempered glass and the ND7200 is also a flameproof enclosure; approximate weight 3.4 kg for both ND9200 and ND7200 |
| Electronics (HART version) | Loop-powered 4-20 mA; minimum signal 3.6 mA; maximum current 120 mA; compliance voltage up to 9.7 VDC at 20 mA (approx. 485 ohms); maximum voltage 30 VDC; reverse polarity protection -30 VDC; overcurrent protection activates above 35 mA |
| Internal position transmitter (T option) | Output 4-20 mA (electrically isolated 600 VDC); supply 12-30 VDC; resolution 16 bit / 0.244 uA; linearity <0.05% FS; temperature effect <0.35% FS; external load max. 0-780 ohms (0-690 ohms for intrinsically safe) |
| Diagnostics and safety integrity | ND9000: self-diagnostics, online diagnostics, performance diagnostics, communication diagnostics, online Valve Signature and performance view; ND7000: basic self-diagnostics, deviation trend, counters and four offline tests only, with no online/performance diagnostics; both are rated IEC 61508 SIL 2 (TUV) |
| Mounting and interfaces | Mounting face per VDI/VDE 3845 and IEC 60534-6; linear stroke 10-120 mm and rotary angle 45-95 degrees; the -A1 suffix in purchase records is a rotary connection kit and must be checked against the actual actuator and valve |
| Ordering-suffix note | The public bulletins give the 8-digit body (ND9000) / 9-digit body (ND7000) codes plus separate ordering codes for limit switches and accessories (filter regulator, gauge block, mounting kits). The -A1 on this arrival is a mounting connection kit; the complete ordering code is subject to the nameplate / purchase order or the official selection catalogue |
Sources: the knowledge-base documents "07_Intelligent Positioners and Valve Controllers" (entry_id 847323914710432a88bba1333739a2f7, Product Materials space, compiled from the official Valmet/Neles bulletins 7ND9021EN, 7ND720EN, 7NENP20EN and 7NDX23EN), "NDX and ND9000 Intelligent Valve Controller Technical Summary" (entry_id 82d3d14701f84d6aa1634f9ff4a8ec03, Product Selection Rules space, based on the Neles datasheet 7ND9021EN 10/2020), "Neles ND7000 Technical Data and Model Rules" (entry_id 9a5208c60ed44d4b91bb898a763e1fdb, based on manual 7ND720EN-10/2020), "Summary of Sub-brands and Main Products of Major Industrial Groups" (entry_id 38431a7c12224da8b167969504b9a1c9, confirming that Neles/ND9000/NDX now belongs to Valmet), and the purchase record "Actual Procurement Cost Record up to 2026-05-31" (entry_id 666b58c007d14314b19751831e12a61e, containing ND9206HXTC, ND9203HXTC, ND7202HXTC with -A1 rotary connection kits). Online supplier pages were used only to cross-check the ND9203/ND9206 and ND7000/ND9000 series split; specifications follow the official bulletins and knowledge-base compilations. Items not listed in the bulletins are flagged and no values are assumed.
IV. Related Models
| Item | Specification |
|---|---|
| ND9203HXTC | The medium-capacity ND9000 model in the same arrival: 4th position 03 (1-3 dm3) instead of 06 (>3 dm3), with the same Ex d enclosure / HART / X approval / position transmitter / polar-temperature configuration; source 7ND9021EN and the knowledge-base purchase record |
| ND7202HXTC | The low-capacity ND7000 model in the same arrival: a basic-level digital valve controller with basic diagnostics and HART only, a different generation from the advanced diagnostics and multi-protocol ND9000; source 7ND720EN-10/2020 |
| ND9106HX8 | Another ND9000 configuration in the knowledge-base purchase record: standard enclosure (3rd position 1), high-capacity spool 06, HART and X8 = CCC China approval; different from the X (ATEX + IECEx) approval code here and must not be assumed to share the same Ex certificate |
| Neles NDX | Valmet's new-generation intelligent valve controller with advanced diagnostics and Neles Valve Manager; the official manual states its retrofit kits replace NE700 and ND9000, a different generation from the ND9206/ND9203 here; source 7NDX23EN-2/2026 |
| Neles NE724 (see CN 1671) | An NE700-series electro-pneumatic positioner operating on the force-balance principle with 4-20 mA input, no microprocessor and no communication protocol - an analog generation, completely different from the digital ND9206/ND7202 and not to be interchanged |
V. Selection Guide & Common Models
Selection guide:Selection starts with the generation: choose the ND9000 for online diagnostics, performance diagnostics, valve signature or multi-protocol (FF/PA) needs, and the ND7000 for basic self-diagnostics with offline tests on a tighter budget. Then set the 4th-position spool capacity from the actuator swept volume: <1 dm3 -> 02, 1-3 dm3 -> 03, >3 dm3 -> 06 - this is the only body difference between the ND9206HXTC and ND9203HXTC, while the ND7202HXTC uses 02. Next check the approval code against the hazardous-area classification (X = ATEX + IECEx, X8 = CCC, etc.) and verify that the flameproof enclosure (3rd position 2) matches the nameplate Ex marking, gas group and temperature class; intrinsically safe and flameproof protection must not be mixed. Verify the HART load (up to 9.7 VDC at 20 mA, approx. 485 ohms), the T position transmitter output load and the C polar-temperature option (-53 to +85 C). Select mounting kits per VDI/VDE 3845 and IEC 60534-6 for linear/rotary and single/double-acting service; -A1 is only a rotary connection kit. The complete ordering code is subject to the nameplate / purchase order or the official selection catalogue. Please feel free to inquire for an item-by-item check against your actuator and service conditions.
Common models:This arrival: the Neles ND9206HXTC / ND9203HXTC (ND9000 series) and ND7202HXTC (ND7000 series) digital valve positioners, all with -A1 rotary connection kits. Specifications come from the official Valmet/Neles bulletins 7ND9021EN and 7ND720EN and the knowledge-base technical compilations and purchase records, for selection and spare-part verification only, not guaranteed values. The Ex marking and complete ordering code are subject to the nameplate / purchase order or the official certificates, and items not listed in the available materials are not assumed.
These are some of the configurations we supply regularly. If you are working through a selection, or would like to know about availability of these models, feel free to get in touch — we can look at the right combination together based on your operating conditions.
Disclaimer: The information above is not guaranteed to remain valid and may be modified without separate notice. Please confirm the latest information at the time of inquiry.
Ordering & Inquiry
Baoman Industrial Technology (Chengdu) Co., Ltd Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China

简体中文
ENGLISH
