Fisher 133H Series Pressure Reducing Regulator - Arrival & Data
Baoman Industrial Technology (Chengdu) Co., Ltd. has recently received the Fisher 133H series pressure reducing valve. The 133H is the high-pressure version of the Fisher (the brand now belongs to Emerson) 133 series of self-operated / direct-operated gas pressure reducing regulators, with an outlet pressure range of 1.5 to 10 psig and a maximum inlet pressure of 60 psig (125 psig emergency). The series uses a balancing system to maintain stable outlet pressure when inlet pressure fluctuates; its single-port construction provides bubble-tight shut-off, it requires an external downstream control line, and a restriction collar is optional to reduce flow capacity. It is mainly intended for industrial and commercial gas supply to furnaces, burners and other appliances. The 133H must not be confused with the 133L (low pressure), 133HP (extra-high pressure) or 133Z (zero pressure) versions, whose specifications are not interchangeable. The specifications below are taken from the original manufacturer's instruction manual D100270X012 (Form 5007) recorded in the knowledge base, for selection and spare-part verification.
I. Arrival Photos

Arrival photo (taken by Baoman Industrial, watermarked, serial information redacted)

Arrival and unboxing detail (taken by Baoman Industrial)

Arrival and unboxing detail (taken by Baoman Industrial)

Arrival and unboxing detail (taken by Baoman Industrial)
II. Brand & Model
| Item | Specification |
|---|---|
| Brand | FISHER (now part of Emerson) |
| Model | 133H (high-pressure version of the 133 series direct-operated pressure reducing regulator) |
| Positioning | Self-operated gas pressure reducing regulator for industrial and commercial supply to furnaces, burners and other appliances; balanced construction maintains accurate control pressure as inlet pressure varies, single-port bubble-tight shut-off, external downstream control line required, and an aluminium restriction collar (25% / 40% / 60% capacity) is optional |
| Difference from other series versions | The 133H has an outlet of 1.5 to 10 psig and a maximum inlet of 60 psig; the 133L low-pressure version is 2 in w.c. to 2 psig with a 60 psig maximum inlet; the 133HP extra-high-pressure version is 2 to 60 psig with a 150 psig maximum inlet and a steel balanced construction; the 133Z zero-pressure version is -1 to 4 in w.c. with a 20 psig maximum inlet. Part numbers and materials differ substantially and must not be interchanged |
| Arrival designation | The arrival note only states '133H series pressure reducing valve' and gives no bore, connection, spring or seal configuration; the specific ordering model is subject to the nameplate / purchase order |
| Source status | The knowledge-base document 'Technical Data Supplement 01 - Regulators / Reducers (General and Gas)' cites the original instruction manual D100270X012; the manual provides no single Cv capacity table and no item-by-item dimensions and weights, so those items are flagged honestly and no values are assumed |
III. Technical Data
The specifications below are taken from the Fisher document '133 Series Direct-Operated Regulators Instruction Manual', document no. D100270X012 (Form 5007, the official manual PDF on emerson.com), as compiled in the knowledge-base document 'Technical Data Supplement 01 - Regulators / Reducers (General and Gas)' (entry_id 331cddb249cd4242b79bd47ff2cce835), and cross-checked against the in-depth parameter entry in the same resource. The official manual provides no single Cv capacity table and no item-by-item dimensions and weights; items not listed in the available documents are flagged honestly and are subject to the nameplate / purchase order or the official manual, with no values assumed.
| Item | Specification |
|---|---|
| Construction and principle | Self-operated, direct-operated spring-loaded pressure reducer; the balancing system maintains accurate outlet control as inlet pressure varies, the single-port construction provides bubble-tight shut-off, and an external downstream control line is used |
| Outlet pressure range (133H) | 1.5 to 10 psig (approx. 0.10 to 0.69 bar) |
| Maximum inlet pressure | 60 psig (approx. 4.1 bar); 125 psig in an emergency. For comparison: 133HP 150 psig, 133L 60 psig, 133Z 20 psig |
| Body size and connections | Body size 2 in (DN 50); NPT connections, or CL125 FF flanges on the cast-iron body / CL150 RF flanges on the steel body |
| Flow coefficient Cv | The official manual gives no single Cv capacity table (see Fisher Catalog 12); as an external-pilot direct-operated design, capacity varies with body size and trim (restriction collar), and no specific Cv value is assumed |
| Restriction collar | Aluminium restriction collar available in 25% / 40% / 60% capacity versions to reduce flow capacity (parts list key 46) |
| Body and main materials | Body cast iron or WCC steel (133HP is steel); on 133H/L/Z the lower casing and spring case are aluminium, while the 133HP spring case is cast iron; the orifice is aluminium on 133H/L/Z and stainless steel on the balanced 133HP construction |
| Diaphragm and elastomers | Main diaphragm elastomer or stainless steel depending on configuration; O-rings nitrile (NBR) or fluorocarbon (FKM), with FKM available for 133H/133L; closing cap gasket on 133H/L/Z is chloroprene (CR), part no. 1H976837022 |
| Spring range | Springs are colour-coded by outlet pressure range (orange / yellow / blue / red / black / white / green, etc.) in zinc-plated steel or 17-7PH stainless steel; the specific spring and colour code for the 133H 1.5 to 10 psig range is subject to the official manual tables and the nameplate / purchase order |
| Operating temperature | -20 to 150 °F (-29 to 66 °C) (source: D100270X012) |
| Typical part numbers | Orifice 20A3046X012 (aluminium); O-rings 1H976335022 / 1H976406992 (NBR) and 1H976506992 (FKM); cage / pin assembly 10A9339X012 / 10A9339X022; thrust washer (133H only). The complete IPL is in D100270X012, pages 11-16 |
| Applications | Industrial and commercial gas supply to furnaces, burners and other appliances; suitable where bubble-tight shut-off and balanced pressure control are required |
| Certifications and ordering | The retrieved manual entry lists no explicit model-level UL / ATEX / IECEx certification statement; the complete ordering model (bore, connections, spring, seals, restriction collar) is not given in the arrival note and is subject to the nameplate / purchase order or the official selection catalogue |
Sources: the knowledge-base document 'Technical Data Supplement 01 - Regulators / Reducers (General and Gas)' (entry_id 331cddb249cd4242b79bd47ff2cce835, Product Materials space), based primarily on the Fisher official '133 Series Direct-Operated Regulators Instruction Manual' D100270X012 (Form 5007, the official PDF on emerson.com); the in-depth parameter entry and the EZR / 133 series descriptions in the same resource corroborate pressures, materials, spring colour coding and applications. The arrival text only states '133H series pressure reducing valve' and gives no bore, connection, spring or seal configuration; items not listed in the manual are flagged honestly and no values are assumed.
IV. Related Models
| Item | Specification |
|---|---|
| 133L | Low-pressure version of the same series: outlet 2 in w.c. to 2 psig, maximum inlet 60 psig (125 psig emergency); the inlet limit matches the 133H but the outlet range, part numbers and spring configuration differ |
| 133HP | Extra-high-pressure version of the same series: outlet 2 to 60 psig, maximum inlet 150 psig, with a steel balanced construction (stainless orifice, cast-iron spring case); not interchangeable with the aluminium construction of the 133H |
| 133Z | Zero-pressure version of the same series: outlet -1 to 4 in w.c., maximum inlet 20 psig (125 psig emergency), used for slight positive / negative pressure control and very different in pressure rating from the 133H |
| Fisher 67C / 67D series | Fisher instrument filter reducers / direct-operated pressure reducing regulators (document nos. 5469 / 5858) for instrument air supply, compiled in the knowledge-base document 'FISHER 67C / 67D Filter Regulator Selection Manual'; often paired with volume boosters and positioners, selected by bore and supply pressure |
| Fisher 912 / 912N series | Direct-operated spring-loaded regulators often used for LPG and various gases, compared in 'Technical Data Supplement 01' and purchasing records; their configuration differs from the high-pressure gas duty of the 133H and specifications are not interchangeable |
| Fisher EZR series | Pilot-operated pressure reducing regulator with NPS 1 to 6 body sizes and a much wider outlet range, used in transmission and distribution networks and industrial lines; an Emerson Fisher gas regulation product but different in construction and flow rating |
V. Selection Guide & Common Models
Selection guide:Selection starts with the medium and duty: the 133H is used for industrial / commercial reduction of non-corrosive gases such as natural gas; check that the inlet does not exceed 60 psig (125 psig emergency) and that the required outlet falls within 1.5 to 10 psig, and distinguish it strictly from the 133L, 133HP and 133Z by outlet pressure range. Then verify the 2 in (DN 50) body size and NPT / CL125 FF / CL150 RF connections, the -29 to 66 °C operating temperature, whether an aluminium restriction collar is needed to reduce capacity, whether FKM seals are required (available for the 133H), and the installation of the external downstream control line. The official manual gives no single Cv capacity table, so flow must be checked against Fisher Catalog 12 or with Emerson; the spring colour code and complete ordering model are subject to the official manual and the nameplate / purchase order. Please feel free to inquire for an item-by-item check against your medium, pressure and flow.
Common models:This arrival: the Fisher 133H series direct-operated pressure reducing regulator (high-pressure gas pressure reducer), outlet 1.5 to 10 psig. Parameters come from the Fisher official manual D100270X012 (Form 5007) recorded in the knowledge base, for selection and spare-part verification only, not guaranteed values; the arrival note gives no body size, connections, spring or seal configuration, so the specific configuration is subject to the nameplate / purchase order or the official manual, and items not listed in the available materials are not assumed.
These are some of the configurations we supply regularly. If you are working through a selection, or would like to know about availability of these models, feel free to get in touch — we can look at the right combination together based on your operating conditions.
Disclaimer: The information above is not guaranteed to remain valid and may be modified without separate notice. Please confirm the latest information at the time of inquiry.
Ordering & Inquiry
Baoman Industrial Technology (Chengdu) Co., Ltd Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China

简体中文
ENGLISH
