PMV EP5XX-HPNU-23K01-PV9DA-4Z Valve Positioner - Arrival & Data
Baoman Industrial Technology (Chengdu) Co., Ltd. has recently received the PMV EP5XX-HPNU-23K01-PV9DA-4Z valve positioner. The arrival text reads "Flowserve PMV", but the current ownership must be stated truthfully: the PMV valve-positioner and switchbox business was divested by Flowserve in 2026 and closed in August 2026 to Houston-based private equity firm Amberjack Capital Partners, under the new company PMV Automation (operating in Houston, TX and Solna, Sweden), with products continuing under the PMV brand. Flowserve's current positioner line is the Logix series and no longer includes PMV. This item is therefore an installed-base spare part of the PMV EP5-series electro-pneumatic positioner; it must not be taken as a Flowserve Logix model, and no specifications are assumed. The digit-by-digit decoding and specifications below come from an online-sourced original PMV brochure (which uses this exact arrival model as its example), and the ownership is corroborated by the knowledge base and official announcements.
I. Arrival Photos

Arrival photo (taken by Baoman Industrial, watermarked, serial information redacted)

Arrival and unboxing detail (taken by Baoman Industrial)

Arrival and unboxing detail (taken by Baoman Industrial)

Arrival and unboxing detail (taken by Baoman Industrial)

Arrival and unboxing detail (taken by Baoman Industrial)
II. Brand & Model
| Item | Specification |
|---|---|
| Brand (current owner) | PMV - now part of PMV Automation under Amberjack Capital Partners (Houston, TX and Solna, Sweden). Flowserve signed the divestiture agreement in May 2026 and closed the transaction in August 2026; PMV is no longer part of Flowserve |
| Arrival note designation | The arrival text reads "Flowserve PMV", a pre-divestiture historical attribution. This page states the current owner truthfully as PMV / PMV Automation and does not present it as a current Flowserve product |
| Model | EP5XX-HPNU-23K01-PV9DA-4Z (EP5 series; XX = general-purpose double-acting electro-pneumatic positioner) |
| Positioning | EP5-series electro-pneumatic positioner: modular, sturdy, simple and reliable, with a high-gain pilot valve, built-in gauge ports, a stainless-steel cam, an add-on F5 feedback unit and simple external zero/span calibration; 4-20 mA input, double-acting |
| Relationship to Flowserve Logix | This item is a PMV EP5 installed-base spare part and must not be used to infer a Flowserve Logix replacement. Flowserve's current positioner line is the Logix series (e.g. 3200MD / 520MD); any replacement must be selected separately by input signal, communication, Ex rating, air supply, travel and diagnostics, with no model pre-assumed |
| Source status | The decoding and specifications come from an online-sourced original PMV brochure FCD PMENBR0006-02/-03 (copyright 2007 Flowserve, a historical document reflecting pre-divestiture status); ownership is corroborated by the knowledge base, the Flowserve divestiture notice and the Amberjack acquisition announcement. Parameters are brochure values, not guaranteed, and are subject to the nameplate / purchase order |
III. Technical Data
The digit-by-digit decoding and specifications below come from an online-sourced original PMV document "EP5 Electropneumatic positioner - Product Information" (document no. FCD PMENBR0006-02/-03, copyright 2007 Flowserve Corporation, a historical document); its "EP5 Series Coding" table uses this exact arrival model EP5XX-HPNU-23K01-PV9DA-4Z as the example, and the Technical data page gives electrical, air-supply, consumption and accuracy data. Ownership is additionally corroborated by the knowledge-base documents "Major Industrial Groups - Sub-brands and Main Products" (entry_id 38431a7c12224da8b167969504b9a1c9) and "PMV D3/D20/D30 Digital Positioner Technical Data and Model Rules" (entry_id 3d5bf01927394a32b93cb59b51744c24), together with the Flowserve divestiture notice (pmv.nu/?p=4477) and the Amberjack acquisition-completion announcement (2026-08-10). Items not listed in the documents (such as specific Ex certificates or spindle drawing details) are flagged honestly and are subject to the nameplate / purchase order, with no values assumed.
| Item | Specification |
|---|---|
| Product type (EP5XX) | EP5 double-acting electro-pneumatic positioner; XX = general-purpose version, not a dedicated intrinsically-safe or explosion-proof version; modular design, high-gain pilot valve, built-in gauge ports, add-on F5 feedback unit |
| Input signal and electrical | 4-20 mA input; input impedance 170-260 Ohms at 20 C; terminals 2.5 mm2 (AWG 14) screw terminals; RFI influence not measurable |
| Accuracy performance | Deadband < 0.15%; linearity < 1% FS; hysteresis < 0.75% FS; repeatability < 0.5% FS (brochure note: percentages are of full scale) |
| Air supply | Maximum 1 MPa / 150 psi, minimum 0.14 MPa / 21 psi; clean, dry, oil-free and dust-free instrument air; supply-pressure effect 0.5% per 0.1 MPa (15 psi) |
| Air consumption and delivery | High-performance (HP) version at 0.6 MPa: about 22 nl/min consumption and 540 nl/min minimum delivery; normal-gain (LB) version: about 9.9 nl/min consumption and 421 nl/min delivery (brochure table values) |
| Connections and conduit | Air connections 1/4" NPT or G (BSP); gauge threads 1/8" NPT or G (BSP); conduit entry 1/2" NPT or M20 |
| Digit-by-digit decoding (official example) | EP5XX = EP5 double-acting general-purpose electro-pneumatic positioner; HP = high-performance spool/pilot valve; N = 1/4" NPT air connections and 1/2" NPT electrical conduit; U = epoxy coating; 23 = spindle no. 23 (codes 01-39, see drawing SPNDLS_P5; a reseller describes 23 as rotary Namur / VDI/VDE 3845, subject to nameplate); K01 = cam 90-degree linear (K01-K34); PV9DA = front cover 90 degrees, direct function, arrow indicator; 4 = 4-20 mA input signal; Z = nitrile (NBR) seals, -20 to +85 C |
| Cam and travel | K01 cam is 90-degree linear with 0-100% scale; for 30/45/60-degree rotation change the front-cover code from PV9 to PV3/PV4/PV6; stainless-steel cam with simple cam locking |
| Spindle and mounting | Spindle code 23 (range 01-39, details per drawing SPNDLS_P5); the exact spindle form and mounting bracket are subject to the nameplate / purchase order, and drawing details are not assumed here |
| Housing, protection and weight | Die-cast aluminium housing; U = epoxy coating (the brochure also lists ED black epoxy paint); fasteners A2/A4 stainless steel; ingress protection IP66 / NEMA 4; weight approx. 1.5 kg / 3.4 lbs |
| Temperature and seal code | Z = nitrile (NBR) seals, -20 to +85 C (this arrival's code); Q = silicone seals, -40 to +85 C (low-temperature option) |
| Hazardous-area distinction | The brochure lists the EP5IS as intrinsically safe (ATEX/FM/CSA, EEx ia IIC T4-T6 II 1 G) and the EP5EX/EP5US as explosion-proof (EEx d IIC T4-T6 II 2 G / CSA-FM Div.1). Intrinsically safe (Ex ia) and explosion-proof (Ex d) are different certification categories and must not be interchanged. This arrival is an EP5XX general-purpose version and does not imply any of the above Ex certifications; hazardous areas require the corresponding model with certificate verification |
| Installed-base spare-part status | The EP5 series is a legacy model from historical PMV documentation, corresponding to installed-base spares and technical traceability. PMV was divested from Flowserve in 2026, and the current owner is PMV Automation; this item must not be quoted as a current Flowserve product |
| Unlisted items | Ordering details not listed item by item in the brochure, Ex certificate numbers, spindle drawing details and final connection forms are subject to the nameplate / purchase order or current PMV Automation documentation, with no values assumed |
This data comes from online search. Sources: (1) the original PMV document "EP5 Electropneumatic positioner - Product Information", document no. FCD PMENBR0006-02/-03 (copyright 2007 Flowserve Corporation; URL: https://vandpsolutions.com/wp-content/uploads/2024/02/Flowserve-PMV-EP5-Brochure.pdf , mirrors at https://media.pmv.nu/2017/02/PMENBR0006-03_EP5_ENG.pdf and https://assets.fagerberg.se/x/e2e819c0e7/ep5.pdf ), whose "EP5 Series Coding" table uses EP5XX-HPNU-23K01-PV9DA-4Z as the official example and whose Technical data page gives electrical, air-supply, consumption and accuracy data; (2) the Flowserve divestiture notice "PMV Product Line Divestiture" https://pmv.nu/?p=4477 (divesting the PMV positioner and switchbox line, the Solna engineering centre and Automax/Worcester/Accord positioners and switchboxes to Amberjack Capital Partners, expected Q3 close); (3) the Amberjack acquisition-completion announcement (2026-08-10, VCA Online / Business Wire) https://www.vcaonline.com/news/2026081032/amberjack-capital-acquires-pmv-automation-from-flowserve-in-partnership-with-industry-veterans-joseph-jobe-and-micah-floyd , confirming closing, the new company PMV Automation (Houston, TX and Solna, Sweden) and continuation of the PMV brand. Knowledge-base side: entry_id 38431a7c12224da8b167969504b9a1c9 sections 11.2/11.4 "PMV (divested in 2026)" and entry_id 3d5bf01927394a32b93cb59b51744c24 "Important notice: PMV brand ownership change and replacement direction" (2026-09-09 business notice) both confirm that PMV is no longer part of Flowserve and that Flowserve's current positioner is the Logix series, corroborating the official announcements. The online brochure is a 2007 historical document reflecting pre-divestiture ownership; this page corrects to the current owner, and unlisted items are flagged honestly with no values assumed.
IV. Related Models
| Item | Specification |
|---|---|
| EP5IS | An intrinsically safe version in the same series (ATEX/FM/CSA), listed in the brochure as EEx ia IIC T4-T6 II 1 G; a different model from the EP5XX general-purpose version on this page, and intrinsically safe (Ex ia) must not be confused with explosion-proof |
| EP5EX / EP5US | Explosion-proof versions in the same series: EP5EX for ATEX and EP5US for CSA/FM, listed as EEx d IIC T4-T6 II 2 G. A different certification category from the EP5IS intrinsically safe version; certificates must be verified separately |
| EP5FS | A Fail-freeze functional version in the same series; different function and ordering code from the EP5XX general-purpose version and intended for different duties |
| PMV D3 / D20 / D30 digital positioners | Another generation of PMV digital valve positioners (knowledge base entry_id 3d5bf01927394a32b93cb59b51744c24), divested from Flowserve in the same 2026 transaction and now under PMV Automation; a different generation from the EP5 electro-pneumatic type, with non-interchangeable specifications |
| Flowserve Logix series (3200MD / 520MD, etc.) | Flowserve's current positioner line (knowledge base entry_id a88cc5db092d46bea8b83fdbbb899cfd), not derived from the EP5. When a Flowserve positioner is required, selection must be redone by duty, with no replacement model pre-assumed |
| EP5XX-HPNU-06K01-PV9DA-4Z | A closely related configuration in official/reseller literature with spindle no. 06 (this arrival uses 23), illustrating that EP5XX spindle codes vary from 01 to 39; the exact configuration is subject to the nameplate |
V. Selection Guide & Common Models
Selection guide:First confirm the owner: this item is an installed-base spare part of the PMV EP5XX general-purpose electro-pneumatic positioner, currently under PMV Automation (Amberjack) and no longer a Flowserve product. If a Flowserve positioner is explicitly required, switch to the Logix series and re-select by duty; do not infer a model from this item. Then verify the configuration digit by digit against the nameplate: EP5XX (double-acting general-purpose), HP high-performance pilot valve, N (1/4" NPT air, 1/2" NPT electrical conduit), U epoxy coating, spindle 23, cam K01 (90-degree linear), front cover PV9DA (90 degrees, direct function, arrow indicator), 4-20 mA input and Z (NBR seals, -20 to +85 C). Check the duty: air supply 0.14 to 1 MPa, clean dry oil-free dust-free air, 1/4" NPT or G connections, 1/2" NPT or M20 conduit, linearity < 1% FS, deadband < 0.15%, IP66 / NEMA 4. For hazardous areas, select the EP5IS (intrinsically safe Ex ia) or EP5EX/EP5US (explosion-proof Ex d) separately and verify certificates; the two Ex categories must not be interchanged, and this general-purpose version does not imply any Ex certification. For 30/45/60-degree duties check the PV3/PV4/PV6 front-cover codes. The data are 2007 historical brochure values, not guaranteed; spindle drawing numbers, Ex certificates and final connections are subject to the nameplate / purchase order or current PMV Automation documentation. Please feel free to inquire for spare-part verification.
Common models:This arrival: the PMV EP5XX-HPNU-23K01-PV9DA-4Z electro-pneumatic valve positioner (EP5 series, double acting, 4-20 mA); the arrival text reads "Flowserve PMV". This page states truthfully that PMV now belongs to PMV Automation under Amberjack (divested from Flowserve in August 2026), that Flowserve's current positioner is the Logix series, and that this item is an installed-base spare part - no Logix model is inferred and no specifications are assumed. The decoding and specifications come from the online-sourced original PMV brochure FCD PMENBR0006, and ownership is corroborated by the knowledge base and official announcements, for selection and spare-part verification only, not guaranteed values; subject to the nameplate / purchase order.
These are some of the configurations we supply regularly. If you are working through a selection, or would like to know about availability of these models, feel free to get in touch — we can look at the right combination together based on your operating conditions.
Disclaimer: The information above is not guaranteed to remain valid and may be modified without separate notice. Please confirm the latest information at the time of inquiry.
Ordering & Inquiry
Baoman Industrial Technology (Chengdu) Co., Ltd Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China

简体中文
ENGLISH
