Home » News Center » Product Arrival Display
Fisher 912-101 LP-Gas Pressure Regulator - Arrival & Data
Fisher 912-101 LP-Gas Pressure Regulator - Arrival & Data
Fisher 912-101 LP-Gas Pressure Regulator - Arrival & Data
Fisher 912-101 LP-Gas Pressure Regulator - Arrival & Data
Fisher 912-101 LP-Gas Pressure Regulator - Arrival & Data

Fisher 912-101 LP-Gas Pressure Regulator - Arrival & Data

Details

Baoman Industrial Technology (Chengdu) Co., Ltd. has recently received the Fisher 912 Series pressure-reducing regulator, model 912-101. The 912 Series is a direct-operated (self-operated), spring-loaded pressure-reducing regulator from Fisher (the brand now belongs to Emerson), with limited-capacity internal relief, typically used for single-stage, low-pressure (in. w.c. class) LP-Gas/gas service, with a gray body, UL listing and a common setting around 11 in. w.c. (27 mbar). The arrival record (2026-05-14, item name "reducing valve", quantity 50 sets) designates 912-101 as one ordering configuration within the 912 Series; 912-101, 912-264 and 912N-1070-166658 are different configurations and must not be interchanged. The specifications below are taken from the knowledge-base document "Technical Data Supplement 01 - Regulators / Pressure-Reducing Regulators (General and Gas)" and the Emerson official manuals it cites, for selection and spare-part verification; item-by-item differences are subject to the nameplate / purchase order.

I. Arrival Photos

Fisher 912 Series pressure-reducing regulator, model 912-101 (direct-operated, spring-loaded, single-stage low-pressure LP-Gas/gas reducing regulator, UL listed, internal pressure sensing, 1/4 in FNPT inlet) arrival photo 1
Arrival photo (taken by Baoman Industrial, watermarked, serial information redacted)

Fisher 912 Series pressure-reducing regulator, model 912-101 (direct-operated, spring-loaded, single-stage low-pressure LP-Gas/gas reducing regulator, UL listed, internal pressure sensing, 1/4 in FNPT inlet) arrival photo 2
Arrival and unboxing detail (taken by Baoman Industrial)

Fisher 912 Series pressure-reducing regulator, model 912-101 (direct-operated, spring-loaded, single-stage low-pressure LP-Gas/gas reducing regulator, UL listed, internal pressure sensing, 1/4 in FNPT inlet) arrival photo 3
Arrival and unboxing detail (taken by Baoman Industrial)

Fisher 912 Series pressure-reducing regulator, model 912-101 (direct-operated, spring-loaded, single-stage low-pressure LP-Gas/gas reducing regulator, UL listed, internal pressure sensing, 1/4 in FNPT inlet) arrival photo 4
Arrival and unboxing detail (taken by Baoman Industrial)

Fisher 912 Series pressure-reducing regulator, model 912-101 (direct-operated, spring-loaded, single-stage low-pressure LP-Gas/gas reducing regulator, UL listed, internal pressure sensing, 1/4 in FNPT inlet) arrival photo 5
Arrival and unboxing detail (taken by Baoman Industrial)

II. Brand & Model

ItemSpecification
BrandFISHER (a brand of Emerson)
Model912-101, part of the Fisher 912 Series of direct-operated, spring-loaded pressure-reducing regulators (single-stage low-pressure type)
PositioningSmall direct-operated LP-Gas/gas reducing regulator: outlet pressure acts directly on the diaphragm to balance the adjusting spring for constant pressure, with limited-capacity internal relief to suppress overpressure; internal pressure sensing; for industrial/domestic single-stage low-pressure gas supply
Arrival designationPurchase record dated 2026-05-14, item name "reducing valve", quantity 50 sets, lead time 4 weeks; designated as the 912 Series ordering configuration 912-101; the specific spring range / body size / connections are subject to the nameplate / purchase order
Relationship to 912-264 / 912N-1070-166658All three are different configurations on the 912 platform: 912-101 and 912-264 are both recorded as "reducing valves" at the same unit price but in different quantities/arrival batches; 912N-1070-166658 is a 912N branch (low/high-pressure dual-use, gray, non-UL-listed, multi-service industrial type). The knowledge base does not break out the body-size/spring differences between 101 and 264 field by field, so no values are assumed and the nameplate / purchase order governs
Source statusThe knowledge base contains a dedicated technical compilation, based primarily on the Emerson official "Single and Second-Stage LP-Gas Regulators Instruction Manual" (June 1986) and the 912H/912N manual D450027T012; items not listed or marked pending are flagged honestly

III. Technical Data

The specifications below are taken from entries "No. 22 Fisher 912N Series Regulator" and "No. 102 Fisher 912 Series Pressure-Reducing Regulator - LP-Gas" in the knowledge-base document "Technical Data Supplement 01 - Regulators / Pressure-Reducing Regulators (General and Gas)", based primarily on the Emerson official "Single and Second-Stage LP-Gas Regulators Instruction Manual" (June 1986), the 912H/912N manual D450027T012, and the 912N Series Instruction Manual D100317X012 / Installation Guide D100317X014. Where a capacity or certification item is not stated in the official manual, it is flagged as "per distributor page (unofficial/distributor)". The field-by-field ordering differences of the 912-101 are not listed in the available official materials and are subject to the nameplate / purchase order or the official manual, with no values assumed.

ItemSpecification
Operating principleDirect-operated (self-operated), spring-loaded: outlet pressure acts on the diaphragm to balance the adjusting spring directly, with limited-capacity internal relief to suppress overpressure; internal pressure sensing
Media and positioningLP-Gas vapor/gas, single-stage low-pressure (in. w.c. class) industrial and domestic gas supply; note that the 912/912H types are for vapor/gas only and must not be used for liquid service
Maximum inlet pressure250 psig (17.2 bar); when used as a second stage, the inlet is limited to 20 psig
Outlet pressure settingSingle-stage low-pressure type is typically set around 11 in. w.c. (27 mbar); industrial adjustable range approx. 3 in. w.c. to 5 psi (per distributor page, unofficial/distributor; final reference is the official manual Table 1)
Ports and connectionsSingle-stage 912: 1/4 in FNPT inlet, 1/4 or 3/8 in FNPT outlet; some with a 1/8 in FNPT screened vent. The specific port combination of the 912-101 is subject to the nameplate / purchase order
Flow capacityNo Cv table is stated in the official manual; capacity is expressed in propane-vapor BTU/hr: approx. 350,000 BTU/hr (approx. 320,000 with tailpiece, per distributor page); exact capacity per body size/spring from the official manual or Fisher Catalog 12
Spring rangeControl springs are available in several outlet-pressure ranges; select the spring part number per Table 1; the 912N-HNRUL (LPG fixed setting) outlet spring of 12-24 in. w.c. (30-60 mbar) serves as a family reference; the specific spring range of the 912-101 is subject to the nameplate / purchase order
Overpressure protectionThe limited-capacity internal relief only reduces minor overpressure and is not a complete overpressure protection; emergency maximum outlet pressure approx. 20 psig (1.4 bar); external relief is required within approx. 3 psi (0.21 bar) differential above the outlet setting
Main materialsBody zinc/aluminium etc. (per model; the LPG 912N-HNRUL has a zinc body); diaphragm nitrile NBR; disc fluorocarbon FKM; vent screen 304 stainless steel; adjusting spring steel; fulcrum rod 302 stainless steel
Temperature range-20 to 160 °F (-29 to 71 °C), depending on diaphragm/seat materials; NBR typically approx. -20 to 180 °F (per distributor page; the official manual governs)
CertificationsUL listed (912 single-stage low-pressure / 912H high-pressure); CRN certified; CE approval (per distributor Instrumart page, unofficial/distributor). The 912N is a non-UL-listed model
Installation and maintenanceThe diaphragm and disc/lever assembly can be replaced without removing the body from the line; drip-lip vent resists rain, insects and ice; installation must comply with applicable codes such as NFPA 54/58; final confirmation with Emerson / Baoman

Sources: the knowledge-base document "Technical Data Supplement 01 - Regulators / Pressure-Reducing Regulators (General and Gas)" (entry_id 331cddb249cd4242b79bd47ff2cce835, Product Materials space), with entries "No. 102 Fisher 912 Series Pressure-Reducing Regulator - LP-Gas" and "No. 22 Fisher 912N Series Regulator" transcribed item by item. Its primary bases are the Emerson official "Single and Second-Stage LP-Gas Regulators Instruction Manual" (emerson.com, June 1986), the 912H/912N manual D450027T012, the 912N Series Instruction Manual D100317X012 and Installation Guide D100317X014, with certain capacity/certification items relayed by distributors Instrumart and ManualZilla and marked unofficial. The arrival data (912-101, item name "reducing valve", quantity 50 sets, unit price 360, lead time 4 weeks, 2026-05-14) is corroborated by the knowledge-base document "Actual Purchase Cost Records through 2026-05-31" (entry_id 666b58c007d14314b19751831e12a61e, Price List space) together with the arrival note. This data comes from a knowledge-base hit; no web search was used. Items not listed or marked pending in the knowledge base are flagged honestly and no values are assumed.

IV. Related Models

ItemSpecification
912-264Another 912 Series ordering configuration received in the same batch (purchase record 2026-03-27, item name "reducing valve", quantity 40 sets, same unit price as the 912-101). The knowledge base does not break out the body-size/spring/connection differences between 101 and 264 field by field; the two must not be interchanged and the nameplate / purchase order governs
912N-1070-166658An ordering configuration of the 912N branch (purchase record 2026-04-22, item name "regulator", quantity 1). The 912N is a low/high-pressure dual-use, gray, non-UL-listed, multi-service industrial type for natural gas, propane, air and other gases; the suffix 1070-166658 is a specific part/order number not decomposed digit by digit in the knowledge base and is subject to the nameplate / purchase order
912HHigh-pressure variant of the 912 Series, red, UL listed, for steam applications; must not be used for liquid. It differs from the 912-101 single-stage low-pressure type in pressure class and media
912N-HNRULA non-relieving compressed-gas/LPG fixed-setting type in the 912N family: zinc body, NBR diaphragm, FKM disc, outlet spring 12-24 in. w.c. (30-60 mbar), 1/4x3/8 NPT; useful as a reference for spring and material options, but not the ordering number of this arrival
Fisher 67CFR / 67DFR SeriesAlso small Fisher direct-operated reducing/filter regulators commonly used for instrument air; the 67C is 1/4" and the 67D is 1/2", serving different purposes from the 912 platform; compared in the knowledge-base document "FISHER 67C/67D Filter Regulator Selection Manual"

V. Selection Guide & Common Models

Selection guide:Selection starts with the duty: the 912-101 is a 912 Series single-stage low-pressure direct-operated LP-Gas/gas reducing regulator; first confirm the media is vapor/gas (not for liquid service), the maximum inlet pressure of 250 psig (17.2 bar, inlet limited to 20 psig when used as a second stage) and the required outlet setting (commonly around 11 in. w.c.). Then check the ports - 1/4 in FNPT inlet and 1/4 or 3/8 in FNPT outlet - and select the matching spring range in the official manual Table 1 for the required outlet pressure. Note that the internal relief is of limited capacity only; if the inlet can overpressure or exceed the downstream rating, external relief/limitation must be added. For hazardous or code-governed service, confirm the applicable UL/CRN/CE scope and NFPA 54/58 installation requirements. The 912-101, 912-264 and 912N-1070-166658 are different configurations; differences are subject to the nameplate / purchase order or the official manual, with no values assumed. Please feel free to inquire for an item-by-item check against your media, body size and spring range.

Common models:This arrival: the Fisher 912 Series pressure-reducing regulator 912-101 (direct-operated, spring-loaded, single-stage low-pressure LP-Gas/gas reducing regulator), a different configuration from the same-batch 912-264 and 912N-1070-166658. Parameters come from the Emerson official LP-Gas regulator manual and the 912N manuals D450027T012 / D100317X012 recorded in the knowledge base, for selection and spare-part verification only, not guaranteed values. The specific configuration, body size, spring range and applicable certification scope are subject to the nameplate / purchase order or the official manual, and items not listed in the available materials are not assumed.

These are some of the configurations we supply regularly. If you are working through a selection, or would like to know about availability of these models, feel free to get in touch — we can look at the right combination together based on your operating conditions.

Disclaimer: The information above is not guaranteed to remain valid and may be modified without separate notice. Please confirm the latest information at the time of inquiry.

Ordering & Inquiry

The photos above show the models currently in stock. If you are working through a similar selection, or would like to know more about a model's configuration and availability, feel free to get in touch — we can look at the right combination together based on your valve type and signal requirements.
Tel: +86 028-60220547  |  Email: info@bit-cd.com
Baoman Industrial Technology (Chengdu) Co., Ltd   Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China

Application area