ASCO WSNFTIS8327B312 Stainless Solenoid Valve 24DC - Arrival & Data
Baoman Industrial Technology (Chengdu) Co., Ltd. has recently received the ASCO WSNFTIS8327B312 24DC stainless-steel solenoid valve (5 on-site photos). The valve belongs to the ASCO Series 8327 of Emerson and is an intrinsically safe (Ex ia IIC T6 Gb) direct-acting 3/2 balanced-poppet valve with a one-piece 316L stainless-steel body, 1/4" NPT ports and a 24 V DC coil, used for switching duties that operate at zero differential pressure. The TIS designation marks it as a manufacturer variant of the WSNFIS intrinsically safe 316L family with 1/2" NPT threaded conduit entry; it requires a certified safety barrier and is restricted to air/inert gas, and it is a different protection concept from the Ex d flameproof WSNF8327Bxxx versions. The specifications below are taken from the knowledge-base compilation based on the original ASCO Series 327 catalogue (document no. 80020GB-2018/R01), for selection and spare-part verification only.
I. Arrival Photos

Arrival photo (taken by Baoman Industrial, watermarked, serial information redacted)

Arrival and unboxing detail (taken by Baoman Industrial)

Arrival and unboxing detail (taken by Baoman Industrial)

Arrival and unboxing detail (taken by Baoman Industrial)

Arrival and unboxing detail (taken by Baoman Industrial)
II. Brand & Model
| Item | Specification |
|---|---|
| Brand | ASCO (part of Emerson; ASCO now belongs to Emerson) |
| Model | WSNFTIS8327B312 24DC, Series 8327 direct-acting 3/2 solenoid valve (European 327 notation, with the series number 327 written as 8327) |
| Positioning | Intrinsically safe direct-acting balanced-poppet valve operating at zero differential pressure, one-piece 316L stainless-steel body, for 3/2 switching of air/inert gas; intrinsically safe loops require a certified safety barrier |
| Protection-concept distinction (key) | WSNFTIS = intrinsically safe Ex ia IIC T6 Gb (II2D Ex tb IIC Db, IP66/67, 316L stainless-steel enclosure, IS coil 0.5 W DC); NOT the Ex d flameproof WSNF / NF versions (Ex db IIC Gb, approx. 3.6-3.7 W). The two are different protection concepts and must not be interchanged |
| Arrival designation | 24DC = 24 V DC coil; the knowledge-base purchasing record lists the near-equivalent WSNFIS8327B312 24VDC as corroboration; the complete ordering configuration is subject to the nameplate / purchase order |
| Source status | The knowledge base contains a dedicated Chinese/English technical compilation based on the original ASCO Series 327 catalogue 80020GB-2018/R01, with complete decode tables for prefixes, electrical characteristics, base numbers and conduit entry; items not listed are flagged honestly and no values are assumed |
III. Technical Data
The specifications below are taken from the knowledge-base document "ASCO Common Solenoid Valve Parameters and Selection Rules" (entry_id 55ccb29e792a4cabadcd99b8350a8494, Product Selection Rules space), based primarily on the original ASCO Series 327 catalogue (document no. 80020GB-2018/R01, 2018 edition) and its electrical-characteristics, prefix, base-number and conduit-entry tables. The digit-by-digit decoding follows sections 4.3, 4.4 and 4.3.1 of that document; the WSNFTIS prefix is classified as intrinsically safe Ex ia IIC T6 Gb (0.5 W DC) per its prefix and electrical tables, and is NOT interpreted as Ex d flameproof. Items not listed in the available document are flagged honestly and are subject to the nameplate / purchase order or the official manual; no values are assumed.
| Item | Specification |
|---|---|
| Series and actuation | Series 8327 (North American direct-acting 3/2; European 327 notation writes the series number 327 as 8327); direct-acting balanced poppet with no minimum operating pressure requirement |
| Ways / function | Two-position three-way 3/2, single solenoid; for on/off switching duty |
| Body material | One-piece 316L stainless-steel body (base-number last digit 2 = 316L stainless steel) |
| Coil and protection (key distinction) | WSNFTIS = intrinsically safe 316L stainless-steel enclosure, Ex ia IIC T6 Gb / II2D Ex tb IIC Db, IP66/67; requires a certified safety barrier and is restricted to air/inert gas; a different concept from Ex d IIC flameproof (WSNF/NF) and must not be interchanged |
| Power consumption | IS intrinsically safe type 0.5 W (24 V DC only); base-number power digit 3 = LP low-power level, but the IS prefix uses the 0.5 W IS coil, not the 1.85 W LP coil |
| Voltage | 24 V DC (arrival designation 24DC); intrinsically safe type is DC only |
| Connections | Valve ports 1/4" NPT; conduit entry 1/2" NPT threaded (T variant, no cable gland, per the conduit-entry table in section 4.3.1) |
| Flow | Cv 0.49 (1 to 2) / 0.56 (2 to 3), Kv 0.42 / 0.48 (Series 8327 figures) |
| Seal and temperature | Base-number seal digit 1 = (F)VMQ low-temperature seal; per base number 327B312 in section 4.3.1 the minimum fluid temperature is approx. -60 C (refer to the original ASCO 327 catalogue for the exact rating) |
| Media | Air and inert gas; the intrinsically safe type is restricted to these two media |
| Functional safety | The 327/8327 are IEC 61508 certified with SIL 3 capability (TUV and Exida); a dedicated exhaust protector is required; versions with MO/MS manual operators are excluded from the SIL certification scope |
| Ordering-code decode | WSNFTIS (intrinsically safe 316L + T variant) / 8327 (direct-acting 3/2 series) / B (basic-flow version, 5.7 mm) / 3 (LP power digit, 0.5 W for IS) / 1 ((F)VMQ seal) / 2 (316L stainless-steel body) / 24DC (24 V DC coil) |
Sources: the knowledge-base document "ASCO Common Solenoid Valve Parameters and Selection Rules" (entry_id 55ccb29e792a4cabadcd99b8350a8494, Product Selection Rules space), based primarily on the original ASCO Series 327 catalogue (document no. 80020GB-2018/R01, 2018 edition), including the prefix tables, electrical-characteristics and Ex-marking tables, complete base-number decode table, conduit-entry table and SIL 3 rules in sections 4.3, 4.3.1 and 4.4. A knowledge-base purchasing record (as of 2026-07-31) also lists the near-equivalent WSNFIS8327B312 24VDC (approx. WSNFTIS8327B312 24VDC), corroborating the arrived model. The protection concept is determined as Ex ia intrinsically safe, not Ex d flameproof, per the prefix and electrical tables; items not listed in the available documents are not assumed and are subject to the nameplate / purchase order.
IV. Related Models
| Item | Specification |
|---|---|
| WSNF8327B102 / WSNF8327B112 | Same-series 316L stainless-steel 3/2 valves, but the WSNF prefix denotes Ex d flameproof (Ex db IIC Gb), RP power approx. 3.6-3.7 W, FPM / VMQ seals; a different protection concept from this Ex ia intrinsically safe model and must not be interchanged |
| NF8327B112 24VDC | 316L stainless-steel body with an aluminium flameproof enclosure (Flameproof-Alum.), VMQ low-temperature seal approx. -40 C, 24 V DC; different from the intrinsically safe 316L enclosure of the WSNFTIS |
| WSNFIS8327B312 24VDC | A near-equivalent model in the knowledge-base purchasing record, belonging to the same WSNFIS intrinsically safe 316L family as the arrived model (T is a manufacturer variant); differences are subject to the original 327 catalogue |
| WSJE8327B102MO | An 8327 version with an MO manual operator; the document notes that versions with MO/MS manual operators are excluded from the SIL functional-safety certification scope |
| ASCO 327 (European direct-acting) | Shares base numbers such as 327B312 with the 8327, in European notation (G thread available); media and temperature ratings are subject to the official catalogue |
V. Selection Guide & Common Models
Selection guide:Selection starts with the protection-loop requirement: for an intrinsically safe loop, confirm the safety-barrier match, the restriction to air/inert gas, and the Ex ia IIC T6 Gb certificate and zone classification; never interchange it with the Ex d flameproof WSNF/NF versions. Then confirm the 3/2 function, zero-differential-pressure actuation of the direct-acting balanced poppet, the 316L stainless-steel body, 1/4" NPT ports, 1/2" NPT conduit entry, 24 V DC supply, IS 0.5 W coil, Cv 0.49/0.56 and the (F)VMQ low-temperature seal. For SIL duties, an exhaust protector is required and versions with MO/MS manual operators must be avoided. Only the last base-number digit 2 denotes the 316L body (digit 1 is brass), so check every digit when ordering; items not listed in the available documents are subject to the nameplate / purchase order or the official catalogue. Please feel free to inquire for an item-by-item check against your media, temperature and safety-barrier loop.
Common models:This arrival: the ASCO (Emerson) WSNFTIS8327B312 24DC stainless-steel solenoid valve, a Series 8327 intrinsically safe direct-acting 3/2 valve with a 316L stainless-steel body and 24 V DC coil, shown in 5 on-site photos; it is a different protection concept from the Ex d flameproof WSNF/NF versions. Parameters come from the knowledge-base compilation based on the original ASCO Series 327 catalogue (80020GB-2018/R01), for selection and spare-part verification only, not guaranteed values; the specific configuration is subject to the nameplate / purchase order or the official manual, and items not listed in the available materials are not assumed.
These are some of the configurations we supply regularly. If you are working through a selection, or would like to know about availability of these models, feel free to get in touch — we can look at the right combination together based on your operating conditions.
Disclaimer: The information above is not guaranteed to remain valid and may be modified without separate notice. Please confirm the latest information at the time of inquiry.
Ordering & Inquiry
Baoman Industrial Technology (Chengdu) Co., Ltd Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China

简体中文
ENGLISH
