IMI Norgren B38P Filter Regulator B38P-244 / B38P-844 - Arrival & Data
Baoman Industrial Technology (Chengdu) Co., Ltd. has recently received the IMI Norgren stainless-steel filter regulators B38P-244-B1MA and B38P-844-M1MA. Both belong to the B38P stainless-steel high-flow filter/regulator family from Norgren, a brand of IMI plc, with a stainless-steel body to NACE MR-0175 and a maximum flow of 4500 L/min for offshore drilling, nuclear, coal-chemical, food and other high-flow, harsh-duty applications. Both share -40 to +80 C (NBR) temperature rating, no bracket, a 5 micron stainless-steel 316 element and NPT ports, differing only in port size (1/4 in. versus 1 in.) and drain type (manual short bowl versus manual mid-size bowl). The specifications below are taken from the IMI Precision Engineering "B38P" datasheet and the "Norgren B38P Filter Regulator - Product Parameters and Selection" document recorded in the knowledge base, for selection and spare-part verification only, subject to the nameplate / purchase order or official manual.
I. Arrival Photos

Arrival photo (taken by Baoman Industrial, watermarked, serial information redacted)

Arrival and unboxing detail (taken by Baoman Industrial)

Arrival and unboxing detail (taken by Baoman Industrial)

Arrival and unboxing detail (taken by Baoman Industrial)
II. Brand & Model
| Item | Specification |
|---|---|
| Brand | IMI NORGREN (part of IMI plc; data from IMI Precision Engineering) |
| Model | B38P-244-B1MA and B38P-844-M1MA (B38P series stainless-steel high-flow filter regulators) |
| Positioning | Stainless-steel body to NACE MR-0175, maximum flow 4500 L/min, a high-flow filter/regulator for offshore drilling platforms, nuclear power, coal chemistry, food and other high-flow, high-speed, harsh-duty applications |
| Difference between the two | B38P-244-B1MA: 1/4 in. NPT with manual short-bowl drain; B38P-844-M1MA: 1 in. NPT with manual mid-size-bowl drain (mid-size bowl only for 1/2 in. and 1 in.). Both share temperature code 4 (-40 to +80 C, NBR), bracket code 4 (none), element code 1 (5 micron) and thread code A (NPT) |
| Arrival designation | Two units received as shown; both manual drain, 5 micron stainless-steel 316 element, NPT ports, no bracket; the port size and bowl type are distinguished by the ordering code, and the specific configuration is subject to the nameplate / purchase order |
| Source status | The knowledge base contains a dedicated B38P parameter compilation and the original IMI datasheet; parameters are transcribed from the originals. The datasheet gives no specific outlet regulation range, which is flagged as to-be-confirmed and not assumed |
III. Technical Data
The specifications below are taken from the IMI Precision Engineering datasheet "B38P - New! High Flow Filter Regulator" (knowledge-base Product Materials space, entry_id c2cfc328b4a94277bdcd52f3ba7ad2c9) and the knowledge-base document "Norgren B38P Filter Regulator - Product Parameters and Selection" (entry_id 2bbe0439e939458aa1608d6ba68550aa, Product Selection Rules space), including the digit-by-digit model code table, material certification and main parameters; the port-size codes, drain codes and accessory part numbers are corroborated between the "B38P" datasheet and the "Norgren Price Sheet" (entry_id 246ea07616fe4bec97dc6741c4b73c26). The datasheet lists no outlet regulation-range value, which is flagged honestly and is subject to the nameplate / purchase order or official manual, with no values assumed.
| Item | Specification |
|---|---|
| Product type | Stainless-steel high-flow filter regulator combining filtration and pressure regulation in a one-piece construction for demanding service |
| Body and certification | Stainless-steel body, material to NACE MR-0175 (resistant to sulfide stress cracking, for sour-gas service); note: stainless-steel accessories do not strictly meet NACE MR-01-75 |
| Maximum flow | 4500 L/min (high flow); datasheet flow-curve test conditions: 10 bar inlet, 40 micron element, 1/2 NPT port |
| Maximum inlet pressure | 17 bar for the automatic-drain version; 31 bar for the manual-drain version (both arrivals are manual-drain, so the 31 bar figure applies) |
| Temperature and seals | Code 4 = -40 to +80 C (NBR seals); code 5 = -20 to +80 C (FKM seals); both arrivals are code 4 (NBR) |
| Filtration | Code 1 = 5 micron, 2 = 25 micron, 3 = 40 micron, all stainless-steel 316 elements; both arrivals are 5 micron (code 1) |
| Ports and thread | Port codes 2 = 1/4 in., 3 = 3/8 in., 4 = 1/2 in., 8 = 1 in. (3/4 in. available on request); thread codes A = NPT, G = ISO G; the two arrivals are 1/4 in. NPT and 1 in. NPT |
| Drain | Code A = automatic drain, B = manual short bowl, M = manual mid-size bowl (mid-size bowl only for 1/2 in. and 1 in.); B38P-244-B1MA has the manual short bowl (B), B38P-844-M1MA the manual mid-size bowl (M) |
| Bracket | Code 2 = with bracket, 4 = without bracket; both arrivals are code 4 (no bracket), with brackets available separately |
| Ordering-code structure | B38P-[port][temperature][bracket]-[drain][element]M[thread], where the M between the element code and the thread code is a fixed placeholder and does not indicate the drain type |
| Outlet regulation range | The available datasheet and parameter compilation give no specific outlet regulation-range value; pressure-gauge accessories of 0-6 bar (18-013-913) and 0-10 bar (18-013-909) are listed for reference only - confirm with the supplier or refer to the nameplate / purchase order for the actual range |
| Common accessories | Mounting nut 5988-02; neck-style mounting bracket without nut 18-001-973; pressure gauge 0-6 bar 18-013-913 and 0-10 bar 18-013-909 (-40 to +65 C); plastic adjustment knob 74630-04 |
| B38P-244-B1MA breakdown | B38P-244-B1MA: 2 = 1/4 in. port, 4 = -40 to +80 C (NBR), 4 = no bracket, B = manual short-bowl drain, 1 = 5 micron element, M = placeholder, A = NPT thread |
| B38P-844-M1MA breakdown | B38P-844-M1MA: 8 = 1 in. port, 4 = -40 to +80 C (NBR), 4 = no bracket, M = manual mid-size-bowl drain (1/2 in. and 1 in. only), 1 = 5 micron element, M = placeholder, A = NPT thread |
Sources (all from the Lexiang knowledge base): (1) "Norgren B38P Filter Regulator - Product Parameters and Selection" (entry_id 2bbe0439e939458aa1608d6ba68550aa, Product Selection Rules space) - digit-by-digit model code table, technical parameters, defaults and accessories; (2) the IMI Precision Engineering "B38P - New! High Flow Filter Regulator" datasheet PDF (entry_id c2cfc328b4a94277bdcd52f3ba7ad2c9, Product Materials space) - port/temperature/bracket/drain/element/thread codes, 4500 L/min, NACE MR-0175, 17/31 bar, accessory part numbers and flow-curve conditions; (3) "Common Filter-Regulator Selection Logic" (entry_id d1bbc75a18134970aa240dbb126e3f0a) - the B38P is listed as a first-tier preferred series; (4) the "Norgren Price Sheet" (entry_id 246ea07616fe4bec97dc6741c4b73c26, Price Sheet space) - actual ordering-model examples. The two core documents corroborate each other on port codes, drain codes, the 5/25/40 micron elements and accessory part numbers; the datasheet gives no outlet regulation range, which is flagged as to-be-confirmed with no values assumed.
IV. Related Models
| Item | Specification |
|---|---|
| B38P-244-B2MA | Price-sheet example: 1/4 in. NPT, -40 to +80 C, no bracket, manual short bowl, 25 micron element; differs from the arrival B38P-244-B1MA only in filtration (25 micron versus 5 micron) |
| B38P-444-M1MA | Price-sheet example: 1/2 in. NPT, -40 to +80 C, no bracket, manual mid-size bowl, 5 micron element; differs from the arrival B38P-844-M1MA only in port size (1/2 in. versus 1 in.) |
| B38P-844-A1MA | Price-sheet example: 1 in. NPT, -40 to +80 C, no bracket, automatic drain, 5 micron element; differs from the arrival B38P-844-M1MA only in drain type (automatic versus manual mid-size bowl) |
| B52G / B54G | Another Norgren stainless-steel high-flow filter/regulator family: outlet pressure 0.5-10 bar / 0.5-7 bar, with a multi-segment part number such as B54G-4AD-DM3-RMJ, completely different from the B38P code system; specifications are not interchangeable |
| SMC AW series stainless-steel versions | A common selection alternative (AW30/40/60 stainless-steel 316 manual/automatic drain, NPT 1/4 to 1 in., 0.05-0.85 MPa, 5 micron); a different brand with non-interchangeable specifications (source: knowledge-base "SMC Filter Regulator") |
V. Selection Guide & Common Models
Selection guide:Selection starts with a digit-by-digit check of the ordering code: port (2 = 1/4 in., 3 = 3/8 in., 4 = 1/2 in., 8 = 1 in.), temperature/seal (4 = NBR -40 to +80 C, 5 = FKM -20 to +80 C), bracket (2 = with, 4 = without), drain (A = automatic, B = manual short bowl, M = manual mid-size bowl for 1/2 in. and 1 in. only), element (1 = 5 micron, 2 = 25 micron, 3 = 40 micron, stainless-steel 316) and thread (A = NPT, G = ISO G), noting that the M between the element and thread codes is a fixed placeholder. Then check against the duty the maximum inlet pressure (31 bar manual drain, 17 bar automatic drain), maximum flow 4500 L/min, the NACE MR-0175 material requirement and the matching gauge range; the outlet regulation range is not given in the datasheet, so confirm with the supplier or refer to the nameplate / purchase order. The two arrivals differ only in port size and drain bowl, so distinguish them by line size and drain-maintenance preference and never interchange them with the B52G/B54G family or a 25 micron configuration. Please feel free to inquire for an item-by-item check against your service conditions.
Common models:This arrival: the IMI Norgren stainless-steel filter regulators B38P-244-B1MA (1/4 in. NPT, manual short bowl) and B38P-844-M1MA (1 in. NPT, manual mid-size bowl), both -40 to +80 C NBR, no bracket and a 5 micron stainless-steel 316 element. Parameters come from the IMI "B38P" datasheet and parameter compilation recorded in the knowledge base, for selection and spare-part verification only, not guaranteed values; the datasheet gives no outlet regulation range, and the nameplate / purchase order or official manual governs, with no values assumed.
These are some of the configurations we supply regularly. If you are working through a selection, or would like to know about availability of these models, feel free to get in touch — we can look at the right combination together based on your operating conditions.
Disclaimer: The information above is not guaranteed to remain valid and may be modified without separate notice. Please confirm the latest information at the time of inquiry.
Ordering & Inquiry
Baoman Industrial Technology (Chengdu) Co., Ltd Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China

简体中文
ENGLISH
