Samson 3241 / BR01B Control Valve with 3277 & 3725 - Arrival
Baoman Industrial Technology (Chengdu) Co., Ltd. has recently received Samson control valve assemblies: a BR01B (BR 01b) lined control valve and a Type 3241 straight-through control valve, with Type 3277 pneumatic diaphragm actuators and 3725 / 3730 positioners. This page covers two complete valves: the BR01B is NPS 1½, Class 150, Cv 19, ductile-iron A395 body with PFA lining, RF flanges, PTFE seat and plug, equal-percentage characteristic, with a 3277-175 actuator and a 3725 positioner; the 3241 is DN32, PN16, RF, EN-JL1040 grey cast-iron body, Kvs 16, equal percentage, standard bonnet, with a 3277-120 cm² actuator (15 mm travel, fail-close, spring range 1.4 to 2.3 bar) and a positioner. The arrival text ends with "POSITIONER 373" (truncated in the original); since the arrival note lists a 3730, the exact positioner designation is subject to the nameplate / purchase order. The 3277 and 3725 data reuse the verified data of entry 1358; each item below is decoded faithfully for selection and spare-part verification.
I. Arrival Photos

Arrival photo (taken by Baoman Industrial, watermarked, serial information redacted)

Arrival and unboxing detail (taken by Baoman Industrial)

Arrival and unboxing detail (taken by Baoman Industrial)

Arrival and unboxing detail (taken by Baoman Industrial)
II. Brand & Model
| Item | Specification |
|---|---|
| Brand | SAMSON (Germany, founded 1907 in Frankfurt; an independent group); the BR 01b lined valve belongs to the PFEIFFER brand series within the SAMSON group |
| BR01B assembly | PFEIFFER BR 01b PFA-lined single-seat globe control valve (this data comes from an online search, source: SAMSON official data sheet TB01b_EN.pdf, samsongroup.com); arrival configuration: NPS 1½ (DN40), Class 150, Cv 19, A395/PFA, RF flanges, PTFE seat and plug, equal percentage, with a 3277-175 actuator (175 cm² diaphragm) and a 3725 positioner |
| Type 3241 assembly | SAMSON Series 240 classic straight-through single-seat control valve, Type 3241 (Type 3241-7 uses the 3277 actuator for direct positioner mounting); arrival configuration: DN32, PN16, RF, EN-JL1040 grey cast-iron body, Kvs 16, equal percentage, standard bonnet (BONNET STD.), with a 3277-120 cm² actuator, 15 mm travel, fail-close and spring range 1.4 to 2.3 bar |
| Type 3277 actuator | Single-acting rolling-diaphragm linear pneumatic actuator with internal compression spring and reversible fail-safe action, accepting direct mounting of positioners, limit switches or position transmitters; two versions in this arrival: 3277-175 (on the BR01B) and 3277-120CM2 (on the 3241) |
| Type 3725 positioner | Digital electro-pneumatic positioner, 4–20 mA two-wire, LCD and capacitive touch keys, non-contact AMR position sensor, directly mountable on the 3277; no HART or fieldbus, manual EB 8394 ZH (see entry 1358) |
| Type 3730 positioner | Newer smart electro-pneumatic positioner (HART / PROFIBUS PA / FF, EXPERTplus diagnostics, data sheets T 8384-3/4/5); the arrival text only states "POSITIONER 373" and is truncated, so the exact series/model digits are subject to the nameplate / purchase order and must not be confused with the 3725 |
| Source status | Type 3241 and 3277/3725/3730 data are taken from original-manufacturer manuals and data sheets in the knowledge base; BR 01b series data comes from an online search of the SAMSON official data sheet (source marked). The arrival configuration string is decoded item by item; uncertain model digits are marked as subject to the nameplate / purchase order, with no values assumed |
III. Technical Data
The two assemblies are decoded item by item below: BR 01b (BR01B) series data (this data comes from an online search, source: SAMSON / PFEIFFER official data sheet TB01b_EN.pdf, "Globe control valve with PFA lining", samsongroup.com); Type 3241 data from the knowledge-base SAMSON official data sheet T 8012-2 EN (Series 240, Types 3241-1/3241-7, JIS version — note that the arrival is a DN/PN version, so specific dimensions are subject to the corresponding DIN data sheet T 8015 and the official manual); Type 3277 actuator and 3725/3730 positioner data from original-manufacturer materials in the knowledge base (EB 8394 ZH, T 8310-1, T 8384 series, the SAMSON smart-positioner compilation) and the verified data of entry 1358. The arrival text "POSITIONER 373" is truncated; uncertain model digits are flagged and subject to the nameplate / purchase order, with no values assumed.
| Item | Specification |
|---|---|
| BR 01b positioning (online source) | PFA-lined single-seat globe control valve for corrosive media and demanding chemical duties; this data comes from an online search, source: SAMSON / PFEIFFER official data sheet TB01b_EN.pdf, "Globe control valve with PFA lining", samsongroup.com. Valve sizes DN 15 to 150 / NPS ½ to 6, pressure ratings PN 10, PN 16 and Class 150, temperatures -10 to +200 °C; flow direction is flow-to-open |
| BR01B arrival configuration decoded | NPS 1 1/2 = 1½ inch (approx. DN40); CLASS 150 = ANSI Class 150; CV19 = flow coefficient Cv 19; BODY A395 / PFA = ASTM A395 ductile-iron body with PFA lining; RFFANGED = RF raised-face flanges; PTFE SEAT & PLUG = PTFE seat and plug; EQ% = equal-percentage characteristic; 3277-175 = Type 3277 actuator with 175 cm² diaphragm; 3725 = digital electro-pneumatic positioner |
| BR 01b construction and materials (online source) | Body of EN-JS 1049 / A395 spheroidal graphite iron with a standard 3 to 5 mm PFA lining; exchangeable PTFE seat and PTFE plug; stem sealed by a PTFE bellows with a backup spring-loaded PTFE V-ring packing; test connection for bellows monitoring; modular design with exchangeable actuator; this data comes from an online search, source: SAMSON / PFEIFFER official data sheet TB01b_EN.pdf |
| Type 3241 series overview | SAMSON Series 240 pneumatic control valve: Type 3241-1 with the Type 3271 actuator and Type 3241-7 with the Type 3277 actuator for direct positioner mounting; valve sizes DN15A to 150A, JIS 10K/20K (arrival is a PN16 version), bodies in cast iron, spheroidal graphite iron, cast/cast stainless steel or forged steel; standard version -10 to +220 °C, extendable per the data sheet to -196 to +425 °C; metal, soft or high-performance metal seat-plug seals available |
| Type 3241 arrival configuration decoded | DN32 PN16 RF = DN 32 mm, PN16, RF raised-face flanges; BODY EN-JL1040 = grey cast-iron body (equivalent to FC250 / EN-GJL-250; data sheet T 8012-2 EN lists cast iron FC250); KV16 = Kvs 16 (equivalent to Cv 20, seat Ø31 mm, travel 15 mm); % = equal-percentage characteristic; BONNET STD. = standard bonnet; 3277-120CM2 = Type 3277 actuator with 120 cm² diaphragm; H15MM = rated travel 15 mm; FC = fail-close (air-to-open, valve closes and stem extends on air failure); 1.4...2.3 = spring range 1.4 to 2.3 bar; POSITIONER 373 = truncated in the original, presumably the 3730 series, subject to the nameplate / purchase order |
| Type 3241 flow and control performance | Kvs/Cv conversion: Cv = 1.17 × Kvs and Kvs/Cv = 0.865; Kvs 16 corresponds to Cv 20, seat diameter 31 mm and travel 15 mm; rangeability 50:1 for DN15A to 50A; equal-percentage or linear characteristic (per T 8000-3); leakage classes: soft seal VI, standard metal seal IV and high-performance metal seal V |
| Type 3241 trim materials | FC250 cast-iron body with Cr steel UNS S41000 / 1.4008 seat and plug; soft-seat sealing ring of glass-fibre-filled PTFE; balanced plug with PTFE or graphite balancing ring; guide bushing 316L, V-ring packing with carbon and A479 302 spring, body gasket graphite on metal core |
| Type 3277 actuator general data | Single-acting diaphragm linear actuator with low-friction rolling diaphragm and internal compression spring, reversible fail-safe action (stem extending / retracting); diaphragm areas 120 / 175v2 / 240 / 350 / 355v2 / 700 / 750v2 cm²; rated travel 7.5 to 30 mm; maximum supply pressure 6 bar; positioner, limit switch or position transmitter can be mounted directly; data sheet T 8310-1 |
| Type 3277 temperature and weight | Temperature ranges: NBR diaphragm -35 to +90 °C (-35 to +80 °C for the 120 cm² version), EPDM diaphragm -50 to +120 °C, PVMQ diaphragm -60 to +90 °C; a vent plug is required below -20 °C (see AB 07). Weights without handwheel: 120 cm² approx. 3.2 kg, 175v2 cm² approx. 10 kg, 240 cm² approx. 9 kg, 350 cm² approx. 12 kg; stem thread M30×1.5 |
| Type 3277 matching in this arrival | The BR01B uses a 3277-175 (175 cm² version, connection G 3/8 or 1/4 NPT per the data sheet); the 3241 uses a 3277-120 cm² actuator with 15 mm travel, fail-close action and spring range 1.4 to 2.3 bar; required supply pressure is estimated as the upper spring-range limit plus 0.2 bar (minimum 1.4 bar), or calculated from seat diameter, differential pressure and diaphragm area (see EB 8394) |
| Type 3725 positioner data | 4 to 20 mA two-wire with reverse-polarity protection, split range 4–11.9 and 12.1–20 mA, static destruction limit ±33 V, minimum current 3.8 mA; supply 1.4 to 7 bar (20 to 105 psi), air quality per ISO 8573-1 particles class 4 / oil class 3 / dew point class 3; direct mounting on the 3277 gives 3.75 to 30 mm travel; hysteresis ≤ 0.3%, sensitivity ≤ 0.1%; IP66, ambient -25 to +80 °C; PPA housing, transparent polycarbonate cover, external parts stainless steel 1.4571/1.4301, approx. 0.5 kg; Ex rating ≤ II 2 G Ex ia IIC T4 (manual EB 8394 ZH, see entry 1358) |
| Type 3730 positioner data | Newer smart positioners: 3730-3 HART, 3730-4 PROFIBUS PA, 3730-5 FF, with EXPERTplus diagnostics and TROVIS-VIEW, data sheets T 8384-3/4/5, 16-digit article code, intrinsically safe Ex ia (including Ex nA and dust protection), no flameproof version; the flameproof range is the 3731 series (T 8387). The arrival text "POSITIONER 373" is truncated, so the exact 3730 sub-series is subject to the nameplate / purchase order |
| Air supply and installation | Positioner air must be clean, dry, oil-free and dust-free; 3725 pneumatic ports 1/4 NPT or G 1/4, cable gland M20 × 1.5 for 6 to 12 mm cable; the 3277 and positioner can be mounted per IEC 60534-6 (NAMUR) or VDI/VDE 3845; the 3241 has flanged connections and a standard bonnet, and the BR 01b DIN version has face-to-face dimensions per DIN EN 558 Series 1 and the ANSI version per Series 37 (online source: SAMSON TB01b_EN.pdf) |
| Configuration string and ordering-code note | The arrival text ends with "3277-120CM2/H15MM/FC/1.4...2.3POSITIONER 373", where "POSITIONER 373" is already truncated in the original; since the arrival note lists a 3730, the 3730 series is presumed but the exact model digits are uncertain. BR01B appears in the knowledge-base purchasing record (2026-02-28 entry) and corresponds officially to the PFEIFFER BR 01b (online source marked above). Digit-by-digit ordering codes (ports, materials, certifications, options) are not listed in the available materials and are subject to the nameplate / purchase order or the official selection catalogue; no values are assumed |
Sources: (1) the knowledge-base document "3241GLOBE VALVE" (entry_id 4c86cad239fc4ea384635422d470e2f5), sourced from the SAMSON official data sheet T 8012-2 EN (Series 240, Types 3241-1/3241-7, JIS version) with associated documents T 8310-1, EB 8012 and the T 8000 series; (2) the knowledge-base documents "SAMSON Intelligent Valve Positioner — Technical Parameters and Model Code Rules" (entry_id df754f4751924cb0a1d456b48cd55428, used to distinguish the 3730/3731), "3725 Installation and Operating Instructions" EB 8394 ZH (entry_id 08b2b03b76184167853af8450f0d6140), the actuator document "05 Actuators (SAMSON)" (entry_id ba85beb3493a4548a00fb0902321818b), and the verified data of entry 1358 (data_1358.json, 3277 + 3725); (3) the knowledge-base "SAMSON Price Sheet" (entry_id 541f82717d4f4187b1e444347e7f5f59) and the 2026-02-28 purchasing record carrying the BR01B and 3241 configurations; (4) BR 01b series data comes from an online search, source: SAMSON / PFEIFFER official data sheet TB01b_EN.pdf, "Globe control valve with PFA lining" (samsongroup.com/document/TB01b_EN.pdf), and its official index page. The arrival text ends with the truncated "POSITIONER 373"; uncertain model digits are subject to the nameplate / purchase order or the original manual, with no values assumed.
IV. Related Models
| Item | Specification |
|---|---|
| 3241-1 / 3241-7 | The 3241-1 uses the Type 3271 pneumatic actuator, while the 3241-7 uses the Type 3277 with direct positioner mounting; the 3241 in this arrival is explicitly fitted with a 3277-120 cm² actuator, i.e. the 3241-7 arrangement, with the exact model digits subject to the nameplate / purchase order |
| Type 3271 actuator | The large-diaphragm sibling of the 3277, with diaphragm areas from 120 cm² up to 2×2800 cm² in tandem versions and a maximum supply pressure of 6 bar, data sheets T 8310-2/-3/-8; used on valves such as the 3241-1 |
| Type 3731 positioner | The flameproof (Ex d) counterpart of the 3730 range: 3731-3 HART and 3731-5 FF with cast-aluminium or stainless-steel housings, data sheets T 8387-3/-5; used instead of the 3730 where Zone 1 Ex d protection is required |
| BR 01a / PFEIFFER lined valves | The BR 01b official document recommends the BR 01a for special requirements; PFEIFFER also offers lined butterfly and ball valves, all part of the SAMSON group lined-valve product line (this data comes from an online search, source: SAMSON TB01b_EN.pdf) |
| 3724 / 3710 accessories | The 3724 is an earlier positioner and the 3710 is a reversing amplifier for double-acting actuators; both are of a different generation from the 3725/3730 and their specifications must not be interchanged (see entry 1358) |
V. Selection Guide & Common Models
Selection guide:Selection first distinguishes the two valve bodies: the BR01B (PFEIFFER BR 01b) is a PFA-lined single-seat valve for corrosive media — check NPS 1½ / Class 150 / Cv 19 / A395 + PFA / RF / PTFE seat and plug / equal percentage, and note the official catalogue temperature limit of -10 to +200 °C; the 3241 is a grey cast-iron EN-JL1040 straight-through valve — check DN32 / PN16 / RF / Kvs 16 (Cv 20) / equal percentage / standard bonnet, and confirm medium temperature and differential pressure are within the T 8012-2 EN limits. Then check the actuators: the BR01B uses a 3277-175 (175 cm²) and the 3241 a 3277-120 cm² with 15 mm travel, fail-close action and spring range 1.4 to 2.3 bar, from which supply pressure and air quality are derived. The positioner generation must be clear: this arrival includes the 3725 (4–20 mA two-wire, no fieldbus) and a presumed 3730 (HART/PA/FF, EXPERTplus); the two are not interchangeable, and the arrival text "POSITIONER 373" is truncated, so the exact model digits are subject to the nameplate / purchase order. Verify mounting kits against NAMUR / VDI-VDE 3845 and explosion protection against the area classification. The specific configuration is subject to the nameplate / purchase order or the original manual. Please feel free to inquire for an item-by-item check against your medium and service conditions.
Common models:This arrival: Samson control valve assemblies of the BR01B (BR 01b, PFA-lined) and Type 3241 series, with Type 3277 actuators and 3725 / 3730 positioners — a multi-component assembly page. Parameters come from original-manufacturer manuals in the knowledge base and SAMSON/PFEIFFER official data sheets (online sources marked), for selection and spare-part verification only, not guaranteed values. The arrival text "POSITIONER 373" is truncated; the specific configuration is subject to the nameplate / purchase order or the original manual, and items not listed in the available materials are not assumed.
These are some of the configurations we supply regularly. If you are working through a selection, or would like to know about availability of these models, feel free to get in touch — we can look at the right combination together based on your operating conditions.
Disclaimer: The information above is not guaranteed to remain valid and may be modified without separate notice. Please confirm the latest information at the time of inquiry.
Ordering & Inquiry
Baoman Industrial Technology (Chengdu) Co., Ltd Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China

简体中文
ENGLISH
