Soldo SQ0320E-20X23L7 Stainless Limit Switch Box - Arrival & Data
Baoman Industrial Technology (Chengdu) Co., Ltd. has recently received the Soldo limit switch box SQ0320E-20X23L7, stainless steel. Soldo is an Italian valve-automation accessory brand within the Rotork group, and the SQ series is a compact explosion-proof (Ex d IIC) limit switch box with a heavy-duty 316L stainless-steel housing for position feedback on quarter-turn valves in hazardous areas. The specifications below are taken from the Rotork official catalogue pub109-003-00-0620 recorded in the knowledge base, with the arrival model decoded digit by digit according to the catalogue nomenclature, for selection and spare-part verification.
I. Arrival Photos

Arrival photo (taken by Baoman Industrial, watermarked, serial information redacted)

Arrival and unboxing detail (taken by Baoman Industrial)

Arrival and unboxing detail (taken by Baoman Industrial)

Arrival and unboxing detail (taken by Baoman Industrial)
II. Brand & Model
| Item | Specification |
|---|---|
| Brand | SOLDO (an Italian brand within the Rotork group, specialising in limit switch boxes and valve position feedback; manufactured in Italy) |
| Model | SQ0320E-20X23L7, part of the SQ series: compact explosion-proof limit switch box with a 316L stainless-steel housing |
| Arrival model decoded | SQ = compact Ex d series in 316L stainless steel; 03 = SPDT gold-plated snap-action mechanical switch (up to SIL 3, Exia ready); 2 = two switches; 0 = pre-wired terminal strip; E = electro-polished stainless finish; after the hyphen: 2 = two M20 × 1.5 cable entries; 0 = 3D plastic red/green visual position indicator; X = ATEX + IECEx approval; 2 = Ex II 2GD Exd IIC marking; 3 = IP66/IP68 (15 m / 100 h); L = -40 to +80 °C; 7 = heavy-duty 316L stainless-steel housing. Decoded digit by digit from the official catalogue nomenclature; the nameplate / purchase order governs finally |
| Design features | Twin/split-shaft design for installation and calibration in confined spaces; easy-set 3° cams adjustable independently without tools; pre-wired PCB switch modules with conformal coating for moisture and dust protection; the two shaft halves are mechanically coupled and sealed from atmosphere, with a permanently fixed position indicator for alignment on reassembly |
| Positioning | Explosion-proof position feedback for quarter-turn valves in hazardous areas; the SQ series has no 4-20 mA or bus options (choose SB, SF/SS, HW, SY/SW or SX for analogue or bus feedback) |
| Source status | The knowledge base contains a technical and model-code compilation based on the official Rotork catalogue, with parameters transcribed from the original. Catalogue example models are illustrative and some digits fall outside each series' option table; actual orders must be built digit by digit from the nomenclature, and no values are assumed here |
III. Technical Data
The specifications below are taken from the knowledge-base compilation of the Rotork official catalogue pub109-003-00-0620 "Limit Switch Boxes" (issue 0620, 44 pages, original English edition), covering detailed SK/SQ series parameters, general switch/transmitter specifications, the model nomenclature and approval combinations. Items not listed or marked for confirmation in the available materials (such as the applicable scope of specific ordering digits) are flagged honestly and are subject to the nameplate / purchase order or the official catalogue; no values are assumed.
| Item | Specification |
|---|---|
| Series and housing | SQ series: compact explosion-proof limit switch box with heavy-duty 316L stainless-steel body and cover, electro-polished finish (arrival model material digit 7 = 316L, coating digit E = electro-polished); twin-shaft design with metal self-lubricating bushings |
| Explosion protection | ATEX / IECEx / EAC / CCOE / INMETRO: Ex II 2GD Ex db IIC T4/T5/T6 Gb; Ex tb IIIC T135/T100/T85 °C Db; Ta: -55 °C ≤ Ta ≤ 105/80/60 °C. The arrival model's approval digit X = ATEX + IECEx and marking digit 2 = Ex II 2GD Exd IIC |
| Ingress protection | IP66 / IP68 (15 m / 100 h); the arrival model's IP digit 3 corresponds to IP66/IP68. NEMA 4 / 4X optional |
| SIL | TÜV certified up to SIL 3; the achievable SIL also depends on the selected switch and must be verified against the SIL certificate for the specific combination |
| Ambient temperature | Standard -40 to +80 °C (arrival model temperature digit L); extendable to -55 to +105 °C depending on switch and approval (e.g. digit N = -55 to +80 °C with C4 switch) |
| Cable entries | Two cable entries, metric or imperial; the arrival model's entry digit 2 = two M20 × 1.5 |
| Switch configuration | Arrival model switch-type digit 03 = SPDT gold-plated snap-action mechanical switch: 0.1 mA at 250 VAC / 0.5 mA at 30 VDC, -40 to +125 °C, up to SIL 3 and Exia ready; switch-quantity digit 2 = two switches; the SQ series has a fixed quantity of two |
| Switch options | The SK/SQ series offers 01, 03, 06, 1F, C4, N1, N3, 70, 73 and 75 (ten types; no 4-20 mA / bus); changing the switch code requires re-checking the quantity, terminal and temperature digits together |
| Visual position indicator | Arrival model indicator digit 0 = 3D plastic red/green visual position indicator; the SQ series also offers T = 3D stainless-steel indicator |
| Mounting | Integrated NAMUR (VDI/VDE 3845) mounting kit optional; the adjustable mounting kit for SK/SQ is ordering code KNO7; a linear mounting kit is also available for valves with 20-250 mm travel |
| Twin-shaft design | The two shaft halves are mechanically coupled and remain captive when the box is opened; the shaft is completely isolated from atmosphere so the grease is uncontaminated; the indicator is permanently fixed on the upper shaft for alignment on reassembly; electrical components are fully sealed when the halves are closed |
| Regional approval availability | SK/SQ series: ATEX/IECEx ✓, cULus only for SK ✓, EAC ✓, CCOE ✓, INMETRO ✓, NEPSI ✓ (the SQ itself has no cULus; the catalogue footnote states starred codes do not apply to the SQ and TB series) |
| General electrical examples | Typical specifications for related switches: 01 silver-plated SPDT 5 A at 250 VAC / 0.6 A at 125 VDC; C4 reed SPDT 1 A at 24 VDC, -60 to +100 °C; 70 NAMUR sensor NJ2-V3-N, nominal 8 VDC, 1/3 mA consumption; the arrival model's type 03 governs |
| Ordering-code note | The standard catalogue model has 14 digits (17 for HW), composed of series + pre-hyphen segment + post-hyphen segment. The digit-by-digit decoding here follows the nomenclature option tables; catalogue examples contain illustrative digits, and the specific ordering code must be checked digit by digit against the nameplate / purchase order or the official catalogue |
Sources: the knowledge-base document "Soldo (Rotork) Limit Switch - Series Parameters and Model Coding Rules Summary" (entry_id 7a610324a2404239b399c627a818e49a, Product Selection Rules space), compiled from the Rotork official catalogue pub109-003-00-0620 "Limit Switch Boxes" (44-page original English edition, issue 0620), including detailed SK/SQ series parameters, general switch specifications and the digit-by-digit nomenclature option tables. The knowledge base also contains a 2026-02-28 purchasing record entry for "SOLDO SQ0320E…" and the "Baoman Supply Capability Summary" brand list (SOLDO as Rotork's limit-switch-box brand). Items not listed or marked for confirmation in the available materials are flagged honestly and are subject to the nameplate / purchase order or the official catalogue; no values are assumed.
IV. Related Models
| Item | Specification |
|---|---|
| SK series | The die-cast-aluminium sibling of the SQ, also a compact Ex d IIC box with IP66/68 and SIL 3; the SK additionally holds cULus Class I/II Div 1&2 approval, which the SQ does not |
| SY / SW series | Heavy-duty Ex d IIC boxes in copper-free aluminium or 316 stainless steel, IP66/68 (10 m / 48 h), with optional 4-20 mA/HART/FF/PA transmitters and PST partial-stroke testing for onshore/offshore oil, gas and petrochemical service |
| SX series | Explosion-proof rating Ex d IIB (lower than the SQ's IIC), die-cast aluminium with thick powder coating, IP66/67; the SX must not be used in IIC areas |
| SF / SS series | Multipurpose intrinsically safe Ex ia IIC T6 boxes, the SS with a 316 stainless-steel housing, IP66/67, optional -60 to +105 °C arctic range and 4-20 mA/HART; an alternative for hazardous areas not requiring flameproof enclosures |
| KN / KNC / KNO7 mounting kits | AISI 304 stainless-steel NAMUR (VDI/VDE 3845) mounting kits; KNO7 is the adjustable kit dedicated to SK/SQ, plus a linear mounting kit for 20-250 mm travel valves |
V. Selection Guide & Common Models
Selection guide:Selection starts with the protection concept: this arrival is the SQ, an Ex d IIC flameproof box; the SX, rated only Ex d IIB, must not be used in IIC areas; for intrinsically safe circuits choose the SP/SM, SB or SF/SS with a safety barrier. Then verify the arrival model digit by digit: 316L housing with electro-polished finish, two M20 × 1.5 entries, 3D red/green indicator, ATEX + IECEx (X2 approval combination), IP66/68, -40 to +80 °C (digit L), and two type-03 gold-plated SPDT switches; note that the SQ has no 4-20 mA or bus feedback, so another series is needed for analogue output. Changing the switch code requires the quantity, terminal and temperature digits to be matched together, and flameproof wiring and cable glands must follow the local electrical code. The digit-by-digit ordering code is subject to the nameplate / purchase order or the official Rotork catalogue. Please feel free to inquire for an item-by-item check against your valve interface and area classification.
Common models:This arrival: the Soldo limit switch box SQ0320E-20X23L7, stainless steel (SQ compact explosion-proof series, 316L housing). Parameters come from the Rotork official catalogue pub109-003-00-0620 recorded in the knowledge base, for selection and spare-part verification only, not guaranteed values. The specific configuration is subject to the nameplate / purchase order or the official catalogue, and items not listed in the available materials are not assumed.
These are some of the configurations we supply regularly. If you are working through a selection, or would like to know about availability of these models, feel free to get in touch — we can look at the right combination together based on your operating conditions.
Disclaimer: The information above is not guaranteed to remain valid and may be modified without separate notice. Please confirm the latest information at the time of inquiry.
Ordering & Inquiry
Baoman Industrial Technology (Chengdu) Co., Ltd Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China

简体中文
ENGLISH
