Samson 2430K Thermostat with 2750-0 Mounting Kit - Arrival & Data
This arrival, photographed in our warehouse: the Samson 2750-0 mounting/connection kit and the 2430K thermostat/sensing element arriving as a set. Per the arrival description: the 2750-0 is the mounting/connection kit or base (G½ screw gland), and the 2430K is the thermostat/sensing-element body (vapour-pressure type with a capillary sensing probe); together they form the "2430K thermostat + 2750-0 mounting kit" set. The knowledge base returned only a purchasing record and no dedicated technical document for this combination; the 2430K parameters were verified online from SAMSON official manuals, for selection and spare-part verification.
I. Arrival Photos

Arrival photo (taken by Baoman Industrial, watermarked, serial information redacted)

Arrival and unboxing detail (taken by Baoman Industrial)

Arrival and unboxing detail (taken by Baoman Industrial)

Arrival and unboxing detail (taken by Baoman Industrial)

Arrival and unboxing detail (taken by Baoman Industrial)

Arrival and unboxing detail (taken by Baoman Industrial)

Arrival and unboxing detail (taken by Baoman Industrial)
II. Brand & Model
| Item | Specification |
|---|---|
| Brand | Samson (SAMSON AG, Frankfurt, Germany, founded 1907; manufacturer of control valves and temperature/pressure regulating equipment) |
| Category | Control thermostat and mounting accessories for temperature regulators, used in district heating, heat exchangers, HVAC and industrial process temperature control |
| Model interpretation (per arrival text) | 2750-0 = mounting/connection kit or base (G½ screw gland); 2430K = thermostat/sensing-element body (vapour-pressure type with a capillary sensing probe); together they form the "2430K thermostat + 2750-0 mounting kit" set |
| 2430K working principle | Vapour-pressure control thermostat; the sensing probe is connected to the thermostat by a capillary, and temperature changes vary the pressure of the filling medium to drive the plug; the SAMSON official mounting manual EB 2430-3 EN explicitly states the vapor pressure principle |
| Source status | The knowledge base returned only a purchasing record (2750-0 listed as a sensor at CNY 1500) and no dedicated technical document; 2430K parameters were verified online from SAMSON official manuals, and detailed dimensions of the 2750-0 mounting kit are not listed in the available materials |
| Distinction | SAMSON also offers Type 2430 (setting thermostat head for Series 43 valves), 2430K (vapour-pressure type) and types 2213/2422 temperature regulators; this document follows the arrived models 2430K + 2750-0 |
III. Technical Data
The parameters below are mainly based on original SAMSON manuals: the Type 2430 K thermostat (vapour-pressure type) from "Notes for Type 2430 K Thermostats (vapor pressure principle)" EB 2430-3 EN (September 2009 edition) and "Thermostat Type 2430 K for Series 43 Valves" EB 2430 EN, as well as the 2430K dynamic-behaviour table in the "Series 43 Temperature Regulators" operating instructions. The 2750-0 mounting/connection kit is described faithfully per the arrival text; its detailed dimensions are not listed in the available materials and are subject to the nameplate / purchase order or the official manual, without assumption. Positions and outline dimensions not given by SAMSON are not assumed.
| Item | Specification |
|---|---|
| Brand / set | Samson; 2430K vapour-pressure thermostat/sensing element + 2750-0 mounting/connection kit (used as a set) |
| 2750-0 mounting kit | Per the arrival text: a mounting/connection kit or base with a G½ screw gland, used to fix and connect the 2430K thermostat/sensing element; the knowledge-base purchasing record lists it as a "sensor"; detailed dimensions/materials are not listed in the available materials and are subject to the nameplate / purchase order or the official manual |
| 2430K working principle | Vapour-pressure control thermostat; the sensing probe is connected to the thermostat via a capillary, and the pressure of the filling medium varies with temperature to drive the plug; purely mechanical, no external power required |
| 2430K setpoint range (EB 2430-3 EN) | 45-65 degC / 55-75 degC (marked on the scale cap); the type designation and temperature range are written on the scaled cap |
| 2430K setpoint range (for Series 43, EB 2430 EN) | 0-35, 25-70, 40-100, 50-120 and 70-150 degC depending on the Series 43 valve, with 2.5-5 K change per turn across the ranges; adjustment by a black plastic ring, clockwise to reduce and counter-clockwise to increase temperature |
| 2430K sensing-element material | Cu (copper) or CrNiMo stainless steel, distinguished by Var-ID; the plate-heat-exchanger version uses CrNiMo |
| 2430K sensing-element size / gland | Threaded insertion sensor, nominally 10x170 mm with a G½ screw gland; the plate-heat-exchanger version is 12x190 mm with G½; a version without a gland also exists (Var-ID 1109125) |
| 2430K dynamic behaviour (Series 43 manual) | Time constants measured in water: adsorption type 9.5 mm with thermowell 40 s / without 16 s, 16 mm with thermowell 80 s / without 30 s; air sensor approx. 8 s (time constant varies with sensor diameter and thermowell) |
| 2430K mounting position | Vertical mounting: sensor tip pointing upward or downward; horizontal mounting: turn the sensor so the notch at its end faces upward; with a plate heat exchanger insert only horizontally into the hot-water duct, with a maximum screw-connection tightening torque of 20 Nm |
| 2430K typical applications | Instantaneous water heaters and plate heat exchangers; with Series 43 valves for district heating, heat exchangers, HVAC and industrial control of liquids, gases and steam (max. working pressure up to 25 bar depending on the valve) |
| 2430K accessories | SAMSON lists Series 43 accessories including G½ / G¾ thermowells (copper PN40 or CrNiMo steel PN40), DVGW-type thermowells for flammable gases PN100, double adapter Do3K and manual adjustment; order numbers per the official catalogue |
| Items not listed | The complete dimension drawing, material grade and torque of the 2750-0 mounting kit, and the digit-by-digit ordering code of the 2430K (not published in the catalogue, generated by configuration software) are not listed in the available materials and are subject to the nameplate / purchase order or the official manual |
These data were obtained via online search. Sources: the SAMSON official manual "Notes for Type 2430 K Thermostats (vapor pressure principle)" EB 2430-3 EN (September 2009 edition, samson.de/document/e24303en.pdf); "Thermostat Type 2430 K for Series 43 Valves" EB 2430 EN; and the "Series 43 Temperature Regulators" operating instructions (including Table 1 setpoint ranges and Table 2 2430K dynamic behaviour). The interpretation of the 2750-0 mounting kit comes from the arrival text. The knowledge base returned only a purchasing record (2750-0 sensor) and documents such as the "Summary of Industrial Group Sub-brands" and contains no dedicated technical document for this set, so online verification was performed. Items not listed in the available materials are not assumed and are subject to the nameplate / purchase order or the official manual.
IV. Related Models
| Item | Specification |
|---|---|
| SAMSON 2430 (Series 43 thermostat head) | Control thermostat (adsorption principle) for the 43-1/43-2/43-3/43-5/43-7 district-heating temperature regulators, with capillary and temperature sensor; distinguished from the vapour-pressure 2430K by principle and valve type |
| SAMSON 2213 / 2422 STM | Safety temperature monitors with limit ranges of -10 to 90 degC or 20 to 120 degC, 5 m capillary, data sheet T 2043; used for overtemperature protection, not the modulating thermostat in this arrival |
| SAMSON Series 43 temperature regulators | District-heating temperature regulators (43-1/43-2/43-3/43-5/43-6/43-7) composed of a valve body + 2430 control thermostat + capillary + temperature sensor, max. working pressure 25 bar; the 2430K is a vapour-pressure thermostat variant |
| SAMSON 5343/5344/5345 thermostats | Electronic/contact thermostats (STM safety temperature monitor, TR temperature regulator, STL safety temperature limiter), switching capacity 16 A/230 V, IP54, TÜV tested to DIN EN 14597; a different technology from the capillary vapour-pressure 2430K |
| SAMSON 3730/3731/3725 positioners | The same brand's pneumatic/smart valve-positioner line for control valves rather than temperature regulation; a SAMSON positioner technical summary is available in our knowledge base |
V. Selection Guide & Common Models
Selection guide:Selection first confirms that the set is used together: the 2750-0 mounting/connection kit or base (G½ screw gland) pairs with the 2430K vapour-pressure thermostat and must not be ordered alone as an ordinary thermostat head. Next check the 2430K setpoint range against the medium and temperature span (45-65 / 55-75 degC per EB 2430-3 EN, or the 0-35 to 70-150 degC ranges when fitted to Series 43 valves), the sensing-element material (Cu or CrNiMo) and size (10x170 mm, G½ gland), and the mounting position (tip orientation when vertical, notch upward when horizontal, horizontal insertion only for plate heat exchangers with a tightening torque <=20 Nm). For gas or plate heat exchangers, select the official DVGW thermowell and corresponding variant. Items not listed in the available materials are subject to the nameplate / purchase order or the official manual. Please feel free to inquire for an item-by-item check against your medium, temperature and valve model.
Common models:This arrival: the Samson 2750-0 mounting/connection kit + 2430K vapour-pressure thermostat/sensing element (as a set). The 2430K parameters were verified online from SAMSON official manuals and the 2750-0 interpretation follows the arrival text; both are for selection and spare-part verification only, not guaranteed values. The specific configuration, dimensions and ordering codes are subject to the nameplate / purchase order or the official manual, and items not listed in the available materials are not assumed.
These are some of the configurations we supply regularly. If you are working through a selection, or would like to know about availability of these models, feel free to get in touch — we can look at the right combination together based on your operating conditions.
Disclaimer: The information above is not guaranteed to remain valid and may be modified without separate notice. Please confirm the latest information at the time of inquiry.
Ordering & Inquiry
Baoman Industrial Technology (Chengdu) Co., Ltd Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China

简体中文
ENGLISH
