Home » News Center » Product Arrival Display
Metso ND9106HNT Valve Positioner with NE726/S1 - Arrival & Data
Metso ND9106HNT Valve Positioner with NE726/S1 - Arrival & Data
Metso ND9106HNT Valve Positioner with NE726/S1 - Arrival & Data

Metso ND9106HNT Valve Positioner with NE726/S1 - Arrival & Data

Details

This arrival, photographed in our warehouse: a batch each of the Metso (now Neles™ / Valmet Flow Control) NE726/S1 and ND9106HNT valve positioners. The ND9106HNT belongs to the Neles ND9000 family of smart valve positioners (4-20 mA + HART, high-capacity spool 06, N no certification, T built-in position transmitter); the NE726/S1 belongs to the Neles NE700 family of electro-pneumatic proportional positioners (4-20 mA, 06 mm pilot valve, S1 mounting face). They are distinct products and the NE726/S1 is not an explosion-protection option code of the ND9106HNT. The parameters are taken from the knowledge-base document "Neles Intelligent Valve Positioners and Valve Controllers" (sourced from Valmet official bulletins 7ND9021EN and 7NENP20EN), for selection and spare-part verification.

I. Arrival Photos

Metso (Neles / Valmet lineage) NE726/S1 electro-pneumatic valve positioner + ND9106HNT smart valve positioner arrival photo 1
Arrival photo (taken by Baoman Industrial, watermarked, serial information redacted)

Metso (Neles / Valmet lineage) NE726/S1 electro-pneumatic valve positioner + ND9106HNT smart valve positioner arrival photo 2
Arrival and unboxing detail (taken by Baoman Industrial)

Metso (Neles / Valmet lineage) NE726/S1 electro-pneumatic valve positioner + ND9106HNT smart valve positioner arrival photo 3
Arrival and unboxing detail (taken by Baoman Industrial)

II. Brand & Model

ItemSpecification
Brand lineageMetso's valve business was spun off as Neles in 2020 and merged into Valmet in 2022; it is now sold under the Neles™ brand within Valmet Flow Control. This document follows the Metso to Neles/Valmet lineage to avoid confusion with the divested Metso brand
[ND9106HNT] modelNeles ND9000 series smart valve positioner; decoded per the original How to Order: ND = smart valve positioner; 9 = Series 9000 (universal shaft + VDI/VDE 3845 mounting face); 1 = standard IP66/NEMA4X epoxy-coated anodised aluminium + polymer composite housing (net weight 1.8 kg); 06 = high-capacity spool (actuator swept volume >3 dm3); H = 4-20 mA + HART; N = no hazardous-area certification (M20x1.5); T = built-in two-wire passive position transmitter (4-20 mA)
[NE726/S1] modelNeles NE700 series electro-pneumatic proportional positioner; decoded per the manual: NE = electro-pneumatic positioner; 7 = series code; 2 = 4-20 mA / 0-20 mA input; 6 = 06 mm 1/4 NPT pilot valve; the 5th position ACTION is printed "S" in the manual (the field table defines only "-" and "A", likely a typographical error and by the example description should be "A", recorded faithfully without assumption); /S1 = VDI/VDE 3845 mounting face with H clamp
Family distinctionThe ND9000 is a microprocessor-based smart positioner (native HART/FF/PA, device-level SIL 2, advanced diagnostics, contactless position sensing); the NE700 is a force-balance analogue (electro-pneumatic) positioner with no on-board microprocessor, no communication protocol and no diagnostics, intended for economical, vibration-resistant general modulating duty
Manual sourcesValmet/Neles original technical bulletins 7ND9021EN - 4/2025 (ND9000) and 7NENP20EN - 10/2020 (NE700/NP700), recorded in knowledge-base entries 847323914710432a88bba1333739a2f7 and e1becaacb1224a35ac3d7572cc878adc
Source statusThe knowledge base contains a dedicated technical document; the Chinese parameters below are extracted from its original text, decoded per the original How to Order, and unpublished positions are not assumed

III. Technical Data

The core parameters below are taken from the ND9000 detailed technical data table and How to Order digit-by-digit decoding (from bulletin 7ND9021EN - 4/2025, pp. 11-12) in the knowledge-base entry "Neles Intelligent Valve Positioners and Valve Controllers" (entry_id 847323914710432a88bba1333739a2f7), as well as the NE700/NP700 technical data tables, model coding rules and selection tables (from bulletin 7NENP20EN - 10/2020). The ND9106HNT is decoded digit by digit against the ND9000 coding table; the NE726/S1 is decoded against the NE700 coding table, with the 5th position "S" as printed in the manual conflicting with the field table and therefore recorded faithfully without assumption. Positions and outline dimensions not published by the manufacturer are marked "not listed in the available materials; subject to the nameplate / purchase order or the official manual" and are not assumed.

ItemSpecification
Brand / modelsNeles™ (within Valmet Flow Control, formerly Metso); ND9106HNT = ND9000 smart valve positioner (4-20 mA + HART, high-capacity spool 06, N no certification, T built-in position transmitter); NE726/S1 = NE700 electro-pneumatic positioner (4-20 mA, 06 mm pilot valve, S1 VDI/VDE 3845 mounting face)
[ND9106HNT] Nature / actionIntelligent valve controller powered by 4-20 mA or fieldbus with a 32-bit microcontroller; double-acting or single-acting; contactless valve-position sensing
[ND9106HNT] Communication / inputHART, FOUNDATION Fieldbus (FF) and Profibus PA (physical layer all to IEC 61158-2); this unit H = 4-20 mA + HART; HART version minimum signal 3.6 mA, HART 6 or 7 selectable; electrical data: burden voltage <=9.7 VDC at 20 mA (approx. 485 ohm), max. current 120 mA, max. voltage 30 VDC, reverse-polarity protection -30 VDC, overcurrent protection >35 mA
[ND9106HNT] Travel / capacityTravel range: linear 10-120 mm, rotary 45 deg-95 deg, feedback shaft free-rotation measuring range 110 deg; this unit's spool 06 is high capacity (actuator swept volume >3 dm3), at 4 bar supply capacity 38 Nm3/h and steady-state consumption <1.0 Nm3/h (also: spool 2 5.5 Nm3/h, spool 3 12 Nm3/h, spool 2&3 steady-state <0.6 Nm3/h)
[ND9106HNT] Air supply / air qualitySupply pressure 1.4-8 bar (20-115 psi); effect of 10% inlet pressure change on position <0.1%; air quality per ISO 8573-1: particulates Class 5 (3-5 um filtration recommended), humidity Class 1, oil Class 3 (<1 ppm)
[ND9106HNT] Performance / vibrationDead band <=0.1%, hysteresis <0.5% (medium constant-load actuator); temperature effect on position 0.5%/10 K; vibration effect on position <1% (2g/5-150 Hz, 1g/150-300 Hz, 0.5g/300-2000 Hz)
[ND9106HNT] Temperature / housingStandard -40 to +85 degC (-40 to +185 degF), Arctic option -53 to +85 degC; IP66 / NEMA 4X; ND9100 housing is epoxy-coated anodised aluminium + polymer composite, net weight 1.8 kg; VDI/VDE 3845 mounting face (80x30-20, 80x30-30, 130x30-30, 130x30-50), conduit thread M20x1.5
[ND9106HNT] Options / approvals / diagnosticsThis unit: N = no hazardous-area certification (M20x1.5), T = built-in two-wire passive position transmitter (4-20 mA); the series can be supplied with ATEX, IECEx, INMETRO, cCSAus, CCOE/PESO, KOSHA, NEPSI and CCC approvals, device-level SIL 2 approved device, explosion protection Ex ia/ib/ic/ec/nA (Ex d on selected models only); diagnostics include device self-diagnostics, online/performance/communication diagnostics, advanced diagnostics and data logging, third-generation diagnostics; LUI supports guided startup, automatic/manual linearisation calibration, one-point calibration and hot swap
[NE726/S1] Nature / principleElectro-pneumatic proportional positioner whose output pressure is proportional to the standard mA DC input, nominal input resistance 190 ohm; based on the force-balance principle; field reversible by flipping the changeover piece and feedback cam; rugged, few parts and excellent vibration resistance; no microprocessor, no communication protocol and no diagnostics
[NE726/S1] Input / pneumaticsStandard input signal 4-20 mA / 0-20 mA DC, split range 4-12 / 12-20 mA; input resistance max. 190 ohm; feedback shaft rotation max. 95 deg (linear); supply pressure 0.14-0.8 MPa (1.4-8 barg / 20-115 psig), supply effect <0.2%/10 kPa (0.14%/psi)
[NE726/S1] Performance / environmentDead band <0.3%, hysteresis <0.7%, linearity <2%; temperature effect <0.05%/degC; vibration effect (1.5 g, 5-100 Hz) <1%; ambient temperature -25 to +85 degC (-13 to +185 degF); weight approx. 2.3 kg / 4.8 lbs; IP54 standard (optional IP65 dust cover)
[NE726/S1] Pilot valve / mountingThis unit: 6 = 06 mm 1/4 NPT pilot valve, selected by actuator swept volume 8.0-30.0 dm3 (at 0.4 MPa/4 barg baseline, consumption 1.2 Nm3/h and output capacity 18.0 Nm3/h); /S1 = VDI/VDE 3845 mounting face with H clamp (not for linear actuators); materials: epoxy-coated anodised aluminium housing, polycarbonate or aluminium cover, stainless steel + aluminium internals, nitrile rubber diaphragm and seals
Manuals / document numbersSources: bulletins 7ND9021EN - 4/2025 (ND9000 intelligent valve controller) and 7NENP20EN - 10/2020 (NE700/NP700 positioners); product page valmet.com/flowcontrol/valve-automation/valve-controllers/
Items not listedOutline dimensions are per the original drawings, the 5th position "S" of the NE726/S1 is kept as printed in the manual, and the specific suffix combinations of the ND9106HNT are generated by the original configuration software; all are subject to the nameplate / purchase order or the official manual and are not assumed

The knowledge-base entries "Neles Intelligent Valve Positioners and Valve Controllers" (entry_id 847323914710432a88bba1333739a2f7, titled "07 - Intelligent Positioners and Valve Controllers") and "Neles NE700/NP700 Technical Data and Model Coding Rules" (entry_id e1becaacb1224a35ac3d7572cc878adc) contain the ND9000 and NE700/NP700 detailed technical data tables, How to Order digit-by-digit decoding and selection tables. These data were obtained via online search. Sources: the Valmet original technical bulletin 7ND9021EN - 4/2025 (ND9000, https://www.valmet.com/globalassets/sharepoint/imported/7nd9021en.pdf, pp. 11-12, How to Order) and bulletin 7NENP20EN - 10/2020 (NE700/NP700, https://www.valmet.com/globalassets/sharepoint/imported/7nenp20en.pdf); product page https://www.valmet.com/flowcontrol/valve-automation/valve-controllers/ . The NE726/S1 is a complete Neles NE700 series model (not an explosion-protection option code of the ND9106HNT); the 5th position ACTION printed "S" in the manual conflicts with the field table and is recorded faithfully. Positions and outline dimensions not published by the manufacturer are not assumed and are subject to the nameplate / purchase order or the official manual.

IV. Related Models

ItemSpecification
Neles ND9000 familyND9100 (standard aluminium, 1.8 kg), ND9200 (Ex d aluminium, 3.4 kg), ND9300 (stainless-steel Ex d, 8.6 kg), ND9400 (stainless steel with polymer cover, 5.6 kg); the ND9106HNT in this arrival is the standard aluminium ND9100 with high-capacity spool 06
Neles NDXNext-generation modular intelligent valve controller with contactless magnetic sensing, stem travel up to 220 mm, low air consumption, graphical LUI and SIL 2 capable; bulletin 7NDX23EN - 2/2026
Neles NE700 / NP700The NE700 is an electro-pneumatic positioner (to which the NE726/S1 in this arrival belongs) and the NP700 a fully pneumatic positioner (20-100 kPa pneumatic signal); both are force-balance proportional positioners for economical, vibration-resistant general modulating duty
Neles SG9000 / VG9000The SG9000 is a smart on/off controller (limit switches available up to SIL 3); the VG9000 is a SIL 3 safety solenoid with partial-stroke testing PST (IEC 61508 / TUV)
Benchmark: Emerson FIELDVUE DVC6200Both are two-wire 4-20 mA smart positioners with contactless position feedback and HART support; the ND9000 has all three protocols native and declares device-level SIL 2, whereas the standard DVC6200 is HART only with FF/PA as separate variants

V. Selection Guide & Common Models

Selection guide:Selection first distinguishes the two product types. The ND9106HNT is a smart positioner (verify from the ND9000 code the housing 1, high-capacity spool 06, HART communication H, no certification N and position transmitter T), and the air supply 1.4-8 bar, travel range and operating temperature should be checked. The NE726/S1 is an electro-pneumatic proportional positioner (4-20 mA, 06 mm pilot valve, S1 mounting face), with the pilot valve matched to an actuator swept volume of 8-30 dm3; note that it is analogue with no HART communication or diagnostics, so upgrade to ND9000/NDX if smart diagnostics are required. For SIL loops, evaluate against the device-level SIL 2 and the safety manual. Positions not published by the manufacturer (such as the 5th position "S" of the NE726/S1) and outline dimensions are subject to the nameplate / purchase order or the original configuration software. Please feel free to inquire for an item-by-item check against your actuator volume and service conditions.

Common models:This arrival: the Metso (now Neles™ / Valmet Flow Control) NE726/S1 electro-pneumatic positioner and ND9106HNT smart valve positioner. Parameters are from the Valmet/Neles official technical bulletins 7ND9021EN - 4/2025 and 7NENP20EN - 10/2020 recorded in the knowledge base, and are for selection and spare-part verification only, not guaranteed values. The specific configuration and approval codes are subject to the nameplate / purchase order or the official manual, and items not listed in the available materials are not assumed.

These are some of the configurations we supply regularly. If you are working through a selection, or would like to know about availability of these models, feel free to get in touch — we can look at the right combination together based on your operating conditions.

Disclaimer: The information above is not guaranteed to remain valid and may be modified without separate notice. Please confirm the latest information at the time of inquiry.

Ordering & Inquiry

The photos above show the models currently in stock. If you are working through a similar selection, or would like to know more about a model's configuration and availability, feel free to get in touch — we can look at the right combination together based on your valve type and signal requirements.
Tel: +86 028-60220547  |  Email: info@bit-cd.com
Baoman Industrial Technology (Chengdu) Co., Ltd   Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China

Application area