Eaton MTL SDRTD Surge Protector & MTL5582B - Arrival & Data
This arrival, photographed in our warehouse: a batch each of the Eaton MTL surge protectors SDRTD and MTL5582B. The SDRTD is an MTL SD series surge protector for 3-wire RTD signal loops (ultra-slim 7 mm DIN-rail module); the MTL5582B is an MTL5500 series single-channel intrinsic-safety RTD resistance isolator that isolates and repeats a hazardous-area RTD signal to the safe area. Both belong to the MTL intrinsic-safety and process-signal protection portfolio and are often paired in temperature-measurement loops. The knowledge base returned only purchasing and supply-capability records and no dedicated technical document for either model; the specifications below are taken from Eaton official SKU specification pages and the official data sheet, for selection and spare-part verification.
I. Arrival Photos

Arrival photo (taken by Baoman Industrial, watermarked, serial information redacted)

Arrival and unboxing detail (taken by Baoman Industrial)

Arrival and unboxing detail (taken by Baoman Industrial)

Arrival and unboxing detail (taken by Baoman Industrial)
II. Brand & Model
| Item | Specification |
|---|---|
| Brand | Eaton (Crouse-Hinds series MTL product line); MTL was formerly MTL Instruments and is now part of Eaton's process safety, automation and measurement business |
| SDRTD model | Eaton Crouse-Hinds MTL SD series surge protector, catalog number SDRTD; 0.75 Vac / 1 Vdc, 5 kA surge current, <12 V voltage protection level, 12 AWG, 10-1500 ohm resistance range, dedicated to 3-wire RTDs |
| MTL5582B model | Eaton Crouse-Hinds MTL5500 series resistance isolator, catalog number MTL5582B; single-channel temperature input, 2/3/4-wire RTD, isolates and repeats hazardous-area RTD signals to a safe-area monitoring system |
| Functional distinction | The SDRTD is a passive signal surge protective device (SPD); the MTL5582B is an active intrinsic-safety isolator (requires 20-35 Vdc). The two serve different functions and are not interchangeable |
| Typical applications | Surge/lightning protection of RTD temperature loops (SDRTD) and intrinsic-safe isolation / signal repetition (MTL5582B) for process control in hazardous areas (Zone 0 / Zone 2) such as oil, chemical and power plants |
| Source status | No dedicated technical document exists in the knowledge base; parameters were obtained online from Eaton official sources |
III. Technical Data
The specifications below follow the original Eaton official SKU specification pages and data sheet. The SDRTD data come from the Eaton official SDRTD product page (including IEC 61643-21 test categories and all electrical/environmental data); the MTL5582B data come from the Eaton official MTL5582B product page and the official data sheet EPS5582 (Rev5, 01/09/2016, document "MTL4582B - MTL5582B Resistance Isolator"). Items not listed in the official materials are marked "not listed in the available materials; subject to the nameplate / purchase order or the official manual" and are not assumed. Note: a third-party website misdescribes the 5582B as a 4-20 mA HART isolator, which conflicts with the official data sheet (RTD resistance isolator); the official data prevail and the third-party error is not adopted.
| Item | Specification |
|---|---|
| Brand / models | Eaton Crouse-Hinds MTL series; SDRTD = MTL SD series surge protector for 3-wire RTD; MTL5582B = MTL5500 series single-channel intrinsic-safety RTD resistance isolator |
| [SDRTD] Nature / purpose | Passive signal surge protector that protects electronic equipment and systems against surges on signal and I/O cabling; designed specifically for 3-wire RTDs (10-1500 ohm resistance range) |
| [SDRTD] Nominal voltage / current | Nominal voltage AC 0.75 V / DC 1 V; max. continuous voltage AC 5 V; nominal load current 10 (as printed on the official page, unit not stated); nominal discharge surge current (8/20 us) 5 kA; lightning impulse current (10/350 us) 2.8 kA |
| [SDRTD] Protection level / response | Voltage protection level at In 38 V; at 1 kV/us <12 V; response time <1 ns; frequency 50 MHz; series resistance 2.7 ohm per line; max. leakage current 0.3 uA |
| [SDRTD] Test categories / standards | Category tested acc. IEC 61643-21: A2, B2, C1, C2, C3, D1; standards NEC/CEC IEC and IEC/EN 61643-21; IECEx/ATEX hazardous rating Zone 2 |
| [SDRTD] Construction / mounting / environment | Dimensions 99 x 101.3 x 7 mm (length x height x width); weight 70 g; 12 AWG conductor cross-section; T-section DIN-rail mounting; IP54; operating/storage temperature -40 to +80 degC; humidity 5-95% RH (non-condensing) |
| [MTL5582B] Nature / purpose | Single-channel intrinsic-safety resistance isolator that connects to a 2/3/4-wire RTD (or other resistance source) in a hazardous area, isolates it and repeats the resistance to a safe-area monitoring system; typically for Pt100 3-wire RTDs; 2/3/4-wire selection by switches (factory set to 3-wire); drives upscale to approx. 420 ohm on sensor open-circuit; not suitable for multiplexed input cards |
| [MTL5582B] RTD input | 2/3/4-wire RTDs to BS 1904 / DIN 43760 (100 ohm at 0 degC); resistance range 10-400 ohm; RTD excitation current 200 uA nominal; RTD may be located in Zone 0, IIC, T4 hazardous area / Div. 1, Group A |
| [MTL5582B] Output / accuracy | Output 2/3/4 wires (independent of the mode selected for hazardous-area terminals); output range 10-400 ohm (from a 100 uA to 5 mA source); load resistance 10-400 ohm; transfer accuracy at 20 degC: <0.15 ohm at excitation current 1-5 mA, <0.25 ohm at 0.5-1 mA; temperature drift +/-10 mOhm/degC (0.01%/degC at 100 ohm) |
| [MTL5582B] Response / power | Response time: within 4% of final value within 1 s; power supply 20-35 Vdc; dissipation 0.8 W at 24 V, 1.0 W at 35 V; current 33 mA at 24 V, 35 mA at 20 V, 28 mA at 35 V |
| [MTL5582B] Isolation / safety | Galvanic isolation 250 V rms between safe-area circuits and power supply; EMC to EN61326; intrinsic-safety parameters (terminals 1 and 3): Uo=1.2 V, Io=4 mA, Po=1.2 mW, Um=253 V rms or dc, non-energy-storing apparatus <=1.5 V / <=0.1 A / <=25 mW; terminals 1, 3, 4 and 5: Uo=6.51 V, Io=10 mA, Po=17 mW; assessed for IEC 61508 functional-safety applications up to SIL 1 (refer to the safety manual) |
| [MTL5582B] Construction / mounting / environment | Dimensions 109.8 x 118.8 x 15.8 mm; weight 150 g; terminals accept conductors up to 2.5 mm2 stranded or single-core with crimp ferrules; T-section 35 mm DIN-rail mounting; green power LED; operating temperature -20 to +60 degC; storage -40 to +80 degC; humidity 5-95% RH |
| Manual / document number | MTL5582B official data sheet EPS5582 Rev5 (01/09/2016), which also covers MTL4582B; SDRTD has no separate data-sheet number, with Eaton providing an SKU specification page plus MTL SD catalog page, instruction sheet and safety manual |
| Items not listed | The separate data-sheet number of the SDRTD and the specific certificate numbers of the MTL5582B are not listed in the available materials and are subject to the nameplate / purchase order or the official manual |
These data were obtained via online search. Sources: the Eaton official SDRTD product page (https://www.eaton.com/ca/en-gb/skuPage.SDRTD.html, including IEC 61643-21 test categories and all electrical/environmental data); the Eaton official MTL5582B product page (https://www.eaton.com/cr/en-us/skuPage.MTL5582B.html); and the Eaton official data sheet "MTL4582B - MTL5582B Resistance Isolator", Publication No. EPS5582 Rev5 010916 (eaton.com/content/dam/eaton/products/process-safety-automation-test-and-measurement/crouse-hinds/literature/crouse-hinds-mtl4582-b-resistance-isolator-datasheet.pdf). The knowledge base returned only purchasing records and the "Baoman Supply Capability Summary" and contains no dedicated technical document for either model, so online verification was performed. A third-party website (ach-automation.com) misdescribes the 5582B as a HART current isolator, which conflicts with the official data sheet and was not adopted.
IV. Related Models
| Item | Specification |
|---|---|
| Other MTL SD series models | The ultra-slim surge protector family includes SD32T3 (2-wire 4-20 mA loop), SLP32D and TP48-N-NDI; the SDRTD in this arrival is the dedicated 3-wire RTD version, selected by signal type and wiring configuration |
| MTL5500 series isolators | The family includes MTL5575 (configurable temperature isolator) and MTL5582B (this unit, non-configurable resistance repeater); the official data sheet describes the 5582B as a non-configurable alternative to the MTL5575 when a resistance input is preferred to 4-20 mA |
| MTL4582B | A resistance isolator model sharing the same official data sheet (EPS5582) as the MTL5582B; specific differences are subject to the nameplate / purchase order or the official manual |
| MTL5500 vs MTL4500 series | MTL5500 is the newer series (to which the MTL5582B belongs) and MTL4500 the previous generation; Eaton also lists the MTL SUM5 smart universal marshalling system as the latest solution |
| RTD loop pairing | The SDRTD (surge protection) plus MTL5582B (intrinsic-safe isolation / signal repetition) form a typical signal-chain protection and isolation pairing for RTD temperature loops |
V. Selection Guide & Common Models
Selection guide:Selection starts with the signal type: the SDRTD is designed for 3-wire RTDs (10-1500 ohm), ultra-slim 7 mm on a T-section DIN rail, for surge protection of signal/I/O cabling (IEC 61643-21 A2/B2/C1/C2/C3/D1, Zone 2), and must not be interchanged with 2-wire 4-20 mA protectors such as the SD32T3. The MTL5582B is a single-channel intrinsic-safety RTD resistance isolator (2/3/4-wire selectable, 10-400 ohm, Zone 0, SIL 1 capable) requiring a 20-35 Vdc supply, suited to isolating and repeating hazardous-area Pt100 signals to the safe area, and is not for multiplexed input cards. The two serve different functions and are often paired in temperature loops. Segments not listed item by item are subject to the nameplate / purchase order or the official manual. Please feel free to inquire for an item-by-item check against your RTD wiring and intrinsic-safety loop parameters.
Common models:This arrival: the Eaton MTL surge protectors SDRTD (MTL SD series 3-wire RTD surge protector) and MTL5582B (MTL5500 series intrinsic-safety RTD resistance isolator). Parameters were obtained online from Eaton official SKU specification pages and data sheets and are for selection and spare-part verification only, not guaranteed values. The specific configuration, approval codes and wiring configuration are subject to the nameplate / purchase order or the official manual, and items not listed in the available materials are not assumed.
These are some of the configurations we supply regularly. If you are working through a selection, or would like to know about availability of these models, feel free to get in touch — we can look at the right combination together based on your operating conditions.
Disclaimer: The information above is not guaranteed to remain valid and may be modified without separate notice. Please confirm the latest information at the time of inquiry.
Ordering & Inquiry
Baoman Industrial Technology (Chengdu) Co., Ltd Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China

简体中文
ENGLISH
