Bifold ASH12 / ASH25 / ASH06 Filter Regulators - Arrival & Technical Data
Baoman Industrial Technology (Chengdu) Co., Ltd. has recently received a shipment of Bifold ASH series filter regulators with ordering codes ASH12-FR-SR-AD-10-X1-L217, ASH25-FR-SR-AD-10-X1 and ASH06-FR-SR-MD-10-X1-L217, all of them 316L stainless-steel FR filter regulators (self-relieving SR, 10 bar regulation band, X1 filter element). The ASH12 and ASH25 are the AD automatic-drain versions and the ASH06 is the MD manual-drain version. The ASH is the arctic-duty version of the SH (fluorosilicone seals, -60 °C). Compared with the previous arrival, this batch adds the 1″ port ASH25 and the AD automatic-drain variants. The information below is organized according to official data sheet BFD000 and the arrival ordering codes, for your reference.
I. Arrival Photos

Arrival photo (taken by Baoman Industrial, watermarked, serial information redacted)

Arrival and unboxing detail (taken by Baoman Industrial)

Arrival and unboxing detail (taken by Baoman Industrial)

Arrival and unboxing detail (taken by Baoman Industrial)

Arrival and unboxing detail (taken by Baoman Industrial)
II. Brand & Model
| Item | Specification |
|---|---|
| Brand | Bifold (Bifold Group, UK) |
| Category | Air-preparation units / filter regulators (FR), distinguished by ordering codes in this arrival |
| ASH12-FR-SR-AD-10-X1-L217 | Arctic-duty FR filter regulator; port code 12 = ½″ NPT; SR self-relieving; AD automatic drain; 10 regulation band (0.40-10 bar); X1 filter element 5 µm; L217 suffix |
| ASH25-FR-SR-AD-10-X1 | Arctic-duty FR filter regulator; port code 25 = 1″ NPT (the data sheet specifies code 25 only with 145 psi/10 bar + X1/X4); SR self-relieving; AD automatic drain; 10 regulation band; X1 filter element 5 µm; no L217 suffix |
| ASH06-FR-SR-MD-10-X1-L217 | Arctic-duty FR filter regulator; port code 06 = ½″ NPT; SR self-relieving; MD manual drain; 10 regulation band; X1 filter element 5 µm; L217 suffix |
| ASH series | Arctic-duty version of the SH, with fluorosilicone seals down to -60 °C; all three models in this arrival are ASH |
| SH / SC series | SH is the standard air-preparation unit (rolling-diaphragm balanced poppet, high flow and low pressure drop); SC is the compact series, not part of this arrival and not detailed here |
| Configuration in this arrival | FR filter regulator / SR self-relieving / AD automatic drain (ASH12, ASH25) or MD manual drain (ASH06) / 10 regulation band / X1 filter element 5 µm; the L217 suffix is defined in the data sheet as low-temperature nitrile to -40 °C, which conflicts with the ASH fluorosilicone -60 °C definition — see technical notes |
| Port-size codes | Codes 06 and 12 both correspond to ½″ NPT; code 25 corresponds to 1″ NPT |
III. Technical Data
All three models in this arrival are Bifold stainless-steel ASH filter regulators using a rolling-diaphragm balanced poppet design for high flow and low pressure drop. The ASH is the arctic-duty version of the SH, fitted with fluorosilicone seals for -60 °C service. The body, bonnet and bowl are standard 316L stainless steel with a sintered 316L filter element; media include air, inert gases and natural gas (sweet / sour), with NACE MR-01-75 available as an option. The ASH12 and ASH25 use automatic drain (AD), with a maximum inlet pressure of 16 bar and a 50 cc bowl; the ASH06 uses manual drain (MD), with a maximum inlet pressure of 20-40 bar and a 25 cc bowl. Note: the ASH is specified as fluorosilicone to -60 °C in the selection table, while the L217 suffix is defined in the data sheet as low-temperature nitrile to -40 °C — these two conflict (ASH12 and ASH06 carry L217, while ASH25 does not) and should be confirmed with the manufacturer.
| Item | Specification |
|---|---|
| 【ASH12】Model and configuration | ASH12-FR-SR-AD-10-X1-L217: ½″ NPT, FR filter regulator, SR self-relieving, AD automatic drain, 10 regulation band (5.8-145 psi / 0.40-10 bar), X1 filter element 5 µm, L217 suffix |
| 【ASH25】Model and configuration | ASH25-FR-SR-AD-10-X1: 1″ NPT (code 25 only with 145 psi/10 bar + X1/X4), FR filter regulator, SR self-relieving, AD automatic drain, 10 regulation band, X1 filter element 5 µm, no L217 suffix |
| 【ASH06】Model and configuration | ASH06-FR-SR-MD-10-X1-L217: ½″ NPT, FR filter regulator, SR self-relieving, MD manual drain, 10 regulation band, X1 filter element 5 µm, L217 suffix |
| Design | Rolling-diaphragm balanced poppet valve for high flow and low pressure drop; the ASH is the arctic-duty version of the SH; a pressure-balanced supply valve and isolated control chamber prevent hunting and buzzing |
| Body / bonnet / bowl | 316L stainless steel (standard); sintered 316L stainless-steel filter element with filtration 5 µm (X1) / 20-30 µm (X3) / 40-50 µm (X4); all units in this arrival use X1 (5 µm) |
| Connections and flow | Service ports ¼″, ½″, ¾″, 1″ NPT (BSPP optional), gauge port ¼″ NPT; flow: ½″ Cv 2.6 (94 SCFM), ½″ high flow Cv 4.5 (168 SCFM), 1″ low flow Cv 4.5 (168 SCFM), 1″ Cv 14.2 (429 SCFM); the ASH12/ASH06 correspond to ½″ Cv 2.6 and the ASH25 to 1″ Cv 14.2 (if it is actually the 25L low-flow version, Cv is 4.5 — verify against the nameplate / purchase order) |
| Regulation ranges | Five bands: 0.03-2 / 0.03-4 / 0.20-6 / 0.25-8 / 0.40-10 bar; code 10 in this arrival is 0.40-10 bar (5.8-145 psi) |
| Maximum inlet pressure / bowl volume | Automatic drain (ASH12, ASH25) 16 bar / 50 cc; manual drain (ASH06) 20-40 bar / 25 cc |
| Temperature and seals | ASH fluorosilicone -60 to +100 °C; SH...L217 low-temperature nitrile -40 to +130 °C; SH Viton -20 to +180 °C. Conflict note: the ASH is specified as fluorosilicone to -60 °C in the selection table while the L217 suffix is defined in the data sheet as nitrile to -40 °C; ASH12 and ASH06 carry L217 and must be confirmed with the manufacturer |
| Diaphragm / springs / fasteners | Silicone diaphragm; springs 302S26 stainless steel (BS 2056) or Inconel; regulating spring Inconel X750 AMS5699; fasteners 18/10 stainless steel; adjustment by M8 hex socket set screw |
| Relieving and bleed | Relief port ¼″ NPT tapped exhaust with removable plastic dust cap (can be removed and piped away for gas service); typical bleed flow 1.5 cm³/sec at 2 bar secondary; relief differential 2 psi / 0.15 bar (relieving versions only, at 2 bar secondary) |
| Media / options | Air / inert gases / natural gas (sweet / sour); NACE MR-01-75 optional; gauges: dry 50 mm or glycerine-filled 50 mm (psi / bar / dual scale) |
| Mounting and ingress | Panel, pillar or bracket mounting; water-ingress design meets severe sea-state / deck-level conditions; manufactured to BS EN ISO 9001:2008, with functional test certificates, certificates of conformity and BS EN 10204 3.1 raw-material certificates available |
| Data sheet | BFD000 (Bifold, September 2018); seal repair kits use the SRK prefix (e.g. SRKSH-FR-SR-MD-10-X4) |
Source: the Bifold official data sheet BFD000 (Bifold, September 2018, entry_id df6932202c4d4fe493301803e4024ab2) recorded in the knowledge base and the original arrival ordering codes. This batch covers the ASH25 (1″ NPT; code 25 only with 10 bar + X1/X4) and the AD automatic-drain variants (maximum inlet 16 bar, 50 cc bowl) that were absent from the previous batch 1309. Honest note: the ASH is specified as fluorosilicone seals to -60 °C in the selection table while the L217 suffix is defined in the data sheet as low-temperature nitrile to -40 °C — these two conflict (ASH12 and ASH06 carry L217; ASH25 has no suffix) and should be confirmed with the manufacturer; whether the ASH25 flow corresponds to code 25 (Cv 14.2) or the 25L low-flow version (Cv 4.5) is subject to the nameplate / purchase order or data sheet BFD000. Configurations not listed in the data sheet are not assumed. Parameters are subject to the latest official documentation.
IV. Related Models
| Item | Specification |
|---|---|
| ASH25 low-flow option 25L | The data sheet also lists code 25L (1″ NPT low flow) with Cv 4.5 (168 SCFM); the ordering code in this arrival is 25 (not 25L) and is therefore listed at the 1″ standard flow Cv 14.2 — if it is actually the low-flow version, verify against the nameplate / purchase order |
| SH other port sizes | The SH series is also available with ¼″, ¾″ and 1″ NPT connections (see data sheet BFD000); this arrival contains only the ASH arctic-duty versions and no standard SH units |
| X3 / X4 filter elements | The data sheet lists X3 (20-30 µm, standard) and X4 (40-50 µm) filtration grades; all units in this arrival use X1 (5 µm); code 25 supports only X1/X4 per the data sheet |
| Bifold SC compact series | Compact air-preparation units, different in form from the ASH units in this arrival and not relevant here |
V. Selection Guide & Common Models
Selection guide:Selection starts with the port size and drain type of each ordering code: the ASH06 and ASH12 are ½″ NPT, the ASH25 is 1″ NPT; the ASH06 uses MD manual drain (maximum inlet 20-40 bar, 25 cc bowl) while the ASH12 and ASH25 use AD automatic drain (maximum inlet 16 bar, 50 cc bowl). Then confirm the function segments — FR filter regulator, SR self-relieving, 10 regulation band (0.40-10 bar) and X1 filter element 5 µm — together with the media (air / inert gases / natural gas, including sweet and sour gas), whether NACE MR-01-75 is required, and the mounting arrangement. Honest note: the definition of ASH fluorosilicone to -60 °C conflicts with the L217 low-temperature nitrile to -40 °C (ASH12 and ASH06 carry L217, while ASH25 has no suffix), and the flow difference between code 25 and the 25L low-flow version of the ASH25 should also be confirmed with the manufacturer. Complete ordering codes are subject to official data sheet BFD000 and confirmation at inquiry.
Common models:Arrival ordering codes: ASH12-FR-SR-AD-10-X1-L217, ASH25-FR-SR-AD-10-X1 and ASH06-FR-SR-MD-10-X1-L217 (all ASH arctic-duty, SR self-relieving, 10 regulation band, X1 filter element 5 µm; the ASH12/ASH25 use AD automatic drain and the ASH06 uses MD manual drain). Parameters come from the official data sheet BFD000 recorded in the knowledge base and are for selection and spare-part verification only, not guaranteed values. The specific configuration is subject to the nameplate / purchase order or the official manual, and items not listed in the available materials are not assumed.
These are some of the configurations we supply regularly. If you are working through a selection, or would like to know about availability of these models, feel free to get in touch — we can look at the right combination together based on your operating conditions.
Disclaimer: The information above is not guaranteed to remain valid and may be modified without separate notice. Please confirm the latest information at the time of inquiry.
Ordering & Inquiry
Baoman Industrial Technology (Chengdu) Co., Ltd Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China

简体中文
ENGLISH
