Samson 3277 Actuator with 3725 Positioner - Arrival & Technical Data
Baoman Industrial Technology (Chengdu) Co., Ltd. has recently received the Samson Type 3277 pneumatic diaphragm actuator with Type 3725 positioner. The 3277 is a single-acting rolling-diaphragm linear pneumatic actuator, and the 3725 is a digital electro-pneumatic positioner that can be mounted directly on the 3277 (4–20 mA two-wire, LCD and capacitive touch keys). Note that the 3725 is a different product from the newer 3730 positioner with HART / PROFIBUS PA / FF and EXPERTplus diagnostics — the manuals and ordering codes differ. The specifications below are taken from the original manufacturer's manual EB 8394 ZH (3725) and the official product catalogue (3277) in the knowledge base, for selection and spare-part verification.
I. Arrival Photos

Arrival photo (taken by Baoman Industrial, watermarked, serial information redacted)

Arrival and unboxing detail (taken by Baoman Industrial)
II. Brand & Model
| Item | Specification |
|---|---|
| Brand | SAMSON (Germany, founded 1907 in Frankfurt; an independent group) |
| Actuator model | Type 3277 pneumatic diaphragm actuator (single-acting, with internal compression spring, linear stroke) |
| Positioner model | Type 3725 digital electro-pneumatic positioner (firmware 1.03, manual EB 8394 ZH, February 2012 edition) |
| Matching relationship | The 3725 can be mounted directly on the 3277 (120 / 240 / 350 / 355 / 700 cm² and other sizes), or per IEC 60534-6 (NAMUR) / VDI/VDE 3845 |
| 3277 positioning | Single-acting diaphragm linear actuator with low-friction rolling diaphragm; reversible fail-safe action (stem extending / retracting); positioner, limit switch or position transmitter can be mounted directly |
| 3725 positioning | Compares the 4–20 mA set point with the valve-stem travel feedback and outputs a pneumatic signal to the actuator; non-contact AMR position sensor, analogue i/p converter, pneumatic amplifier and microprocessor |
| Difference from the 3730 | The 3730 is a newer full-function digital positioner (HART / PROFIBUS PA / FF, EXPERTplus diagnostics, TROVIS-VIEW, data sheet T 8387, SIL 2/3); this arrival is the 3725, with no fieldbus or EXPERTplus, commissioned via its own keys/display and parameter codes P0–P20 |
| Source status | Both models have original-manufacturer documents in the knowledge base; parameters are transcribed from the originals; specific ordering codes are subject to the nameplate / purchase order or the original manual |
III. Technical Data
The 3725 specifications below are taken from the SAMSON original "Installation and Operating Instructions" EB 8394 ZH (1300-1621, February 2012 edition, firmware 1.03), and the 3277 specifications from the SAMSON official catalogue (Ed. Nov 2025) and data sheet T 8310-1. The 3725 and the 3730/3731 are different platforms and their specifications must not be interchanged. Items not listed in the available materials or marked as pending in the official sources (such as the digit-by-digit ordering code of the 3277) are flagged honestly and are subject to the nameplate / purchase order or the official manual; no values are assumed.
| Item | Specification |
|---|---|
| 3725 travel range | Direct mounting on a 3277 actuator: 3.75 to 30 mm; per IEC 60534-6 (NAMUR): 3.75 to 50 mm; on a 3372 actuator: 15/30 mm; rotary actuators: 24° to 100° |
| 3725 input signal | 4 to 20 mA, two-wire, reverse-polarity protected; split range 4–11.9 mA and 12.1–20 mA; static destruction limit ±33 V; minimum current 3.8 mA; load impedance ≤ 6 V (equivalent to 300 Ω at 20 mA) |
| 3725 air supply | Supply pressure 1.4 to 7 bar (20 to 105 psi); air quality per ISO 8573-1: particles class 4, oil class 3, dew point class 3 or at least 10 K below the minimum ambient temperature |
| 3725 output and characteristics | Output signal pressure 0 bar up to maximum supply pressure, software-limited to 2.4 bar; characteristics: 3 for straight-through valves and 9 for rotary valves (linear, equal percentage, reverse equal percentage, etc.) |
| 3725 accuracy | Hysteresis ≤ 0.3%; sensitivity ≤ 0.1%; w/x direction reversible; temperature effect ≤ 0.15%/10 K; supply effect none; vibration ≤ 0.25% (IEC 770, up to 2000 Hz, 4 g) |
| 3725 air consumption and output flow | Static air consumption ≤ 100 ln/h (supply up to 6 bar, 0.6 bar output); actuator filling 8.5 m³[N]/h at Δp=6 bar and 3.0 m³[N]/h at Δp=1.4 bar (Kvsmax=0.09); exhausting 14.0 m³[N]/h at Δp=6 bar and 4.5 m³[N]/h at Δp=1.4 bar (Kvsmax=0.15) |
| 3725 ambient / electrical / protection | Permitted ambient temperature -25 to +80 °C (Ex versions per the EC certificate limits); one M20×1.5 cable gland for 6–12 mm cable OD, terminals for 0.2–1.5 mm²; protection class IP66 |
| 3725 materials / weight / Ex | Housing polyphthalamide (PPA), transparent polycarbonate cover, external parts stainless steel 1.4571 and 1.4301; weight approx. 0.5 kg; Ex rating ≤ II 2 G Ex ia IIC 4 (type 3725-1100 holds certificate PTB 11 ATEX 2020 X) |
| 3725 commissioning and display | Three capacitive touch keys and LCD; parameter codes P0–P20 (P2 fail-safe position, P3 pin position, P4 rated travel, P5 characteristic, P9 output pressure limit, P15 initialisation, P16 zero calibration, P17 manual mode, P18 reset, P19 enable configuration, P20 firmware version); EMC to EN 61000-6-2/-6-3, EN 61326-1 and NAMUR NE 21 |
| 3277 type and sizes | Single-acting diaphragm linear actuator with internal compression spring and low-friction rolling diaphragm; diaphragm areas 120 / 175v2 / 240 / 350 / 350v2 / 355v2 / 700 / 750v2 cm²; reversible fail-safe action (stem extending / retracting) |
| 3277 travel / supply / temperature | Rated travel 7.5 to 30 mm; maximum supply pressure 6 bar; temperature ranges: NBR diaphragm -35 to +90 °C (-35 to +80 °C for the 120 cm² version), EPDM diaphragm -50 to +120 °C, PVMQ diaphragm -60 to +90 °C; separate limits apply for on/off duty and a vent plug is required below -20 °C (see AB 07) |
| 3277 materials / weight / data sheet | Stem stainless steel, stem seals NBR / EPDM, diaphragm casing painted steel plate or die-cast aluminium, stem thread M30×1.5; 3277 weights without handwheel: 120 cm² 3.2 kg, 240 cm² 9 kg, 350 cm² 12 kg, 700 cm² 26 kg; data sheet T 8310-1 |
| 3277 compatible valves | Especially suited to SAMSON Types 3213, 3222, 3321, 3531, 3226, 3260, 3323, 3535 and Series 240, 250, 280, 290, 590 valves; a handwheel or travel stop can be added |
| Ordering-code note | The 3725 model code (EB 8394 section 2) is exemplified as xxx00000009999, with Ex codes 000 = none and 1100 = II 2 G Ex ia IIC T4 (ATEX); the digit-by-digit ordering code of the 3277 is not provided in the official catalogue and is marked pending, subject to the nameplate / purchase order or data sheet T 8310-1 |
Sources: the knowledge-base documents "SAMSON Intelligent Valve Positioner — Technical Parameters and Model Code Rules" (entry_id df754f4751924cb0a1d456b48cd55428, used to distinguish the 3730/3731) and the SAMSON original manual "Type 3725 Digital Electro-Pneumatic Positioner — Installation and Operating Instructions" EB 8394 ZH (1300-1621, 02/2012, firmware 1.03, entry_id 08b2b03b76184167853af8450f0d6140, technical data tables and model code); 3277 parameters are taken from the knowledge-base document "05 Actuators (SAMSON)" (entry_id ba85beb3493a4548a00fb0902321818b, sourced from the SAMSON official catalogue Ed. Nov 2025 and data sheet T 8310-1). Knowledge-base purchasing records also list 3725-112 and 3730-310010004, which are different models and must not be confused. Items marked pending in the official sources or not listed in the available materials are flagged honestly and are subject to the nameplate / purchase order or the original manual; no values are assumed.
IV. Related Models
| Item | Specification |
|---|---|
| SAMSON 3730 / 3731 | Newer full-function digital positioners: 3730-3 HART, 3730-4 PROFIBUS PA, 3730-5 FF, with the 3731 as the Ex d flameproof version; EXPERTplus diagnostics, data sheet T 8387; a different platform from the 3725 in this arrival and specifications must not be interchanged |
| SAMSON 3271 actuator | The large-diaphragm sibling of the 3277, with diaphragm areas from 120 cm² (micro-flow valves) up to 2×2800 cm² (tandem versions), maximum supply pressure 6 bar, data sheets T 8310-2/-3/-8 |
| SAMSON 3372 / 3278 actuators | The 3372 is a linear actuator for V2001 series control valves (120/350 cm²); the 3278 is a rotary actuator (160/320 cm²) on which the 3725 can also be mounted per VDI/VDE 3845 |
| SAMSON 3724 / 3710 accessories | The 3724 is an earlier positioner; the 3710 is a reversing amplifier for double-acting actuators (see the knowledge-base purchasing record 3710-10210020000-02) |
V. Selection Guide & Common Models
Selection guide:Selection starts with the positioner generation: this arrival is the 3725 (4–20 mA two-wire, no fieldbus, commissioned via local keys). If HART / PROFIBUS PA / FF and EXPERTplus diagnostics are required, choose the 3730/3731 instead — the two are not interchangeable. Then match the 3277 diaphragm area (120/240/350/700 cm², etc.) and required travel to the 3725 feedback lever and pin position (code P3: 25/35/50/90°), and confirm the fail-safe action (ATO air-to-open / ATC air-to-close), supply pressure 1.4–7 bar, air quality per ISO 8573-1 and whether output pressure limiting (P9) is needed. For hazardous areas, check against certificate PTB 11 ATEX 2020 X and the 3725-1100 model code. The digit-by-digit ordering code of the 3277 is not listed in the available materials and is subject to the nameplate / purchase order or data sheet T 8310-1. Please feel free to inquire for an item-by-item check against your valve and service conditions.
Common models:This arrival: the Samson Type 3277 pneumatic diaphragm actuator with Type 3725 digital electro-pneumatic positioner (the 3725 and the 3730 are different products). Parameters come from original-manufacturer manuals and the official catalogue recorded in the knowledge base and are for selection and spare-part verification only, not guaranteed values. The specific configuration is subject to the nameplate / purchase order or the official manual, and items not listed in the available materials are not assumed.
These are some of the configurations we supply regularly. If you are working through a selection, or would like to know about availability of these models, feel free to get in touch — we can look at the right combination together based on your operating conditions.
Disclaimer: The information above is not guaranteed to remain valid and may be modified without separate notice. Please confirm the latest information at the time of inquiry.
Ordering & Inquiry
Baoman Industrial Technology (Chengdu) Co., Ltd Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China

简体中文
ENGLISH
