IMI Norgren B68G-NNS-004 Filter Regulator - Arrival & Technical Data
This arrival, photographed in our warehouse: one IMI Norgren B68G-NNS-004 filter regulator. The B68G is a large-flow filter/regulator series in Norgren's Excelon® Quikclamp system (G3/4 to G1½ ports, 240 dm³/s typical flow, aluminium body). The knowledge-base document on the B38P filter regulator covers a different series and cannot be applied here; the parameters below are taken from the knowledge-base original sample for the B64G/B68G Excelon filter regulators and the low-temperature B68G sample.
I. Arrival Photos

Arrival photo (taken by Baoman Industrial, watermarked, serial information redacted)

Arrival and unboxing detail (taken by Baoman Industrial)

Arrival and unboxing detail (taken by Baoman Industrial)
II. Brand & Model
| Item | Specification |
|---|---|
| 【Brand】 | IMI Norgren (a precision-engineering brand of IMI plc, UK); the product data sheets are marked NORGREN ENERGY SECTOR and IMI Precision Engineering |
| 【Model】 | B68G-NNS-004 (B68G series Excelon® Quikclamp large-flow filter regulator); the specific port, drain, pressure range and filter-element suffix are subject to the nameplate / purchase order or the official manual |
| 【Distinction from B38P】 | The knowledge-base document "Norgren B38P Filter Regulator — Product Parameters and Selection" and the "Common Filter Regulator Selection Logic" list the B38P and B52G; the B68G is a larger-port (G3/4 to G1½), higher-flow (240 dm³/s) Excelon series and parameters must not be cross-applied |
| 【Model-code note】 | Per the original sample, N at the 5th and 6th digits denotes a replacement filter/regulator without a yoke, as in the original example B68G-NNK-AR3-RLN; the meaning of this unit's S and 004 suffix is not listed in the available materials and is subject to the nameplate / purchase order or the official manual |
| 【Product positioning】 | Combined filtration and regulation with high-efficiency water removal and good regulation characteristics; non-rising adjusting knob with snap-action lock; standard options include non-relieving models, manual drain and alternative pressure ranges |
| 【Manual source】 | Knowledge-base file "B64GB68G" original sample (NORGREN ENERGY SECTOR, B64G/B68G Excelon® Quikclamp system Filter/regulators); "Low-temperature B68 B72" sample (IMI Precision Engineering) |
III. Technical Data
The core parameters below are taken from the knowledge-base original sample "B64GB68G" (Technical features, Technical data B68, Flow characteristics B68G and Materials) and the "Low-temperature B68 B72" sample (technical data and ordering information). Outline dimensions given only as drawings in the sample and not extractable as text are marked "not listed in the available materials; subject to the nameplate / purchase order or the official manual". The B38P is a different series and its parameters were not used.
| Item | Specification |
|---|---|
| 【Brand / model】 | IMI Norgren; B68G-NNS-004 = B68G large-flow filter regulator in the Excelon® Quikclamp system (NN denotes a yoke-less replacement unit; meaning of S/004 not listed in the available materials) |
| 【Medium / max. inlet pressure】 | Compressed air only; max. inlet pressure 17 bar (250 psi); the low-temperature version's metal bowl is also rated to 17 bar |
| 【Flow (B68)】 | 240 dm³/s (typical conditions: 10 bar inlet, 1 bar set pressure, 1 bar drop below set); low-temperature sample: 240 dm³/s (Kv 12.7) at 10 bar inlet, 6.3 bar set pressure and 1 bar drop |
| 【Flow-characteristic conditions】 | B68G sample curve: 1″ port, 40 µm element, regulating range 0.4-8 bar, 10 bar inlet pressure; the low-temperature sample gives an outlet pressure range of 0.3-10 bar |
| 【Ports / gauge port】 | B68 standard air ports per sample: G3/4, G1, G1 1/4, G1 1/2 (Excelon Quikclamp); gauge port Rc 1/8 (1/8 PTF on the low-temperature B68); threaded exhaust port |
| 【Filter element / filtration】 | Filter element 5 µm and 40 µm (sintered plastic); the low-temperature version is supplied with a 5 µm element; service kits LB68G-KITM05R (5 µm), KITM25R (25 µm), KITM40R (40 µm) |
| 【Drain / relieving】 | Manual drain standard, automatic drain optional (the low-temperature sample lists manual drain); standard options include non-relieving models; the low-temperature range offers relieving/non-relieving and manual/automatic drain combinations |
| 【Operating temperature】 | Standard -20 to +80 °C (-4 to +176 °F); low-temperature version ambient -40 °C to +85 °C; below +2 °C the air supply must be dry enough to prevent ice formation |
| 【Materials (B68G)】 | Body, bonnet, bowl and yoke: aluminium; adjusting knob: acetal resin; elastomers: synthetic rubber; filter element: sintered plastic. The low-temperature sample lists elastomers as neoprene and nitrile rubber |
| 【Weight】 | Original B68 sample: G3/4 and G1 3.29 kg, G1 1/4 and G1 1/2 3.35 kg (standard models with yoke); the low-temperature B68G-8AS-005 is 1.16 kg (2.55 lb). The specific weight of this unit is subject to its nameplate |
| 【Knob / mounting】 | Non-rising adjusting knob with snap-action lock; Excelon® Quikclamp system with optional single/double yokes (e.g. Y68A-8GN-N1N, Y68A-8GN-N2N) and end-connector kits |
| 【Standard model examples】 | Original sample models: B68G-66K-MR3-RLN (G3/4, manual), B68G-86K-MR3-RLN (G1), B68G-AGK-MR3-RLN (G1 1/4); yoke-less replacement example B68G-NNK-AR3-RLN; low-temperature NPT 1 model B68G-8AS-005 |
| 【Approvals / service limits】 | No ATEX/Ex rating is listed in the sample (not listed in the available materials; subject to the nameplate / purchase order or the official manual); intended for industrial compressed-air and fluid systems only, and must not be used beyond the pressures and temperatures stated in the technical features |
Knowledge-base file "B64GB68G" (entry_id 5b7a5631d50946a0845c417aca9056de, product-materials space, file_type pdf): original sample "NORGREN ENERGY SECTOR — B64G, B68G, Excelon® Quikclamp system Filter/regulators, G 1/4 … G 1 1/2", with parameters from the Technical features, Technical data B68, Flow characteristics B68G, Materials and Accessories B68 sections. Knowledge-base file "Low-temperature B68 B72" (entry_id 8d8038c7b5984516bdda8e1d8e62e449, product-materials space, file_type pdf): original sample "IMI Precision Engineering — Low-temperature B72G, B74G, B68G filter/regulators", with parameters from the technical-data and ordering-information sections. Both are original manufacturer samples held in the knowledge base, not online-verified data. The B38P material ("Norgren B38P Filter Regulator — Product Parameters and Selection", entry_id 2bbe0439e939458aa1608d6ba68550aa) covers a different series and was not used. Outline dimensions are given as drawings in the original sample and are not listed as text values, so no values are assumed.
IV. Related Models
| Item | Specification |
|---|---|
| Norgren B64G | Smaller-port Excelon filter regulator in the same series: G1/4 to G3/4, flow 30-106 dm³/s, zinc-alloy body with aluminium bonnet/bowl, weight approx. 1.66-2.02 kg |
| Norgren B72G / B74G (low-temperature) | Low-temperature smaller-port models: B72G 1/4″ 38 dm³/s (Kv 2.0), B74G 1/2″ 100 dm³/s (Kv 5.3); together with the B68G they cover outdoor applications at -40 to +85 °C |
| Norgren B38P / B52G | The B38P and B52G are filter regulators of different series (see the knowledge-base selection logic); the B52G/B54G are high-flow stainless-steel models (document 8.530.350.0x, max. inlet 31 bar) and must not share parameters with the aluminium B68G |
| Excelon® accessories | Y68A single/double yokes, end-connector kits (5524-55/52, 5523-52/93), panel-mounting nut 5520-89, tamper-resistant cap 4355-51, gauge 18-013-013 (Rc 1/8, 0-10 bar) |
| B68G service kits | LB68G-KITM05R (5 µm) / KITM25R (25 µm) / KITM40R (40 µm) manual-drain service kits; automatic-drain types LB68G-KITA05R/A25R/A40R |
V. Selection Guide & Common Models
Selection guide:When selecting, first confirm from the nameplate / purchase order the specific B68G suffix (G3/4 to G1½ or NPT port, manual/automatic drain, relieving version, 5/40 µm element and pressure range), then verify the 17 bar max. inlet pressure, 240 dm³/s flow, temperature range and material compatibility. For outdoor duty at -40 °C, select the low-temperature version (0.3-10 bar regulation, 5 µm element, aluminium bowl). For yoke-less replacement units, confirm against the original NN code rules with the supplier; the S/004 suffix is subject to the nameplate / purchase order or the official manual. Please feel free to inquire for an item-by-item check against your air quality and port size.
Common models:This arrival: the IMI Norgren B68G-NNS-004 filter regulator (B68G Excelon large-flow series, aluminium, 240 dm³/s). Parameters come from the original B64G/B68G and low-temperature B68G samples held in the knowledge base and are for selection and spare-part verification only, not guaranteed values. The B38P is a different series and was not applied. The specific configuration is subject to the nameplate / purchase order or the official manual, and items not listed in the available materials are not assumed.
These are some of the configurations we supply regularly. If you are working through a selection, or would like to know about availability of these models, feel free to get in touch — we can look at the right combination together based on your operating conditions.
Disclaimer: The information above is not guaranteed to remain valid and may be modified without separate notice. Please confirm the latest information at the time of inquiry.
Ordering & Inquiry
Baoman Industrial Technology (Chengdu) Co., Ltd Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China

简体中文
ENGLISH
