Midland-ACS 8FRMSV07205 & Controlair 350SS Filter Regulators - Arrival
Baoman Industrial Technology (Chengdu) Co., Ltd. has recently received two filter regulators: the Midland-ACS 8FRMSV07205 and the Controlair 350SS. They belong respectively to the Rotork group (Midland, UK) and to ControlAir of the USA (distributed under authorization by Baoman). The Midland model can be decoded digit by digit using the knowledge-base compilation of the original samples; no dedicated document for the Controlair 350ss exists in the knowledge base, so its parameters are taken from the official ControlAir product specification page. Both brands are listed separately below for selection and spare-part verification.
I. Arrival Photos

Arrival photo (taken by Baoman Industrial, watermarked, serial information redacted)

Arrival and unboxing detail (taken by Baoman Industrial)

Arrival and unboxing detail (taken by Baoman Industrial)

Arrival and unboxing detail (taken by Baoman Industrial)
II. Brand & Model
| Item | Specification |
|---|---|
| 【Midland】Brand | MIDLAND-ACS (a Rotork group brand, Rotork Midland Ltd., Wolverhampton, UK, founded 1956); the whole range is built around 316L stainless steel for oil & gas and offshore harsh-service applications |
| 【Midland】Model | 8FRMSV07205 (3500 series air-preparation unit, 1″ filter regulator) |
| 【Midland】Model decoding | 8 = 1″ port; FRM = filter regulator, manual drain; S = 316L stainless steel; V = standard seals -20°C (FKM); 07 = regulating range 0.5-7 bar; 2 = NPT connection; 05 = 5 µm filter element |
| 【Midland】Product positioning | Air-preparation unit combining filtration and regulation to supply clean, stabilized air to actuator circuits; high-flow design with a bowl-level sight window |
| 【Midland】Manual source | Original sample PUB117-001-00 (Issue 07/19, 40 pages: 3550/3500/3575 air preparation + OPD) |
| 【Controlair】Brand | ControlAir (US-origin pneumatic products distributed under authorization by Baoman Industrial) |
| 【Controlair】Model | 350ss (Type 350SS stainless steel filter regulator; the specific suffix was not stated in the arrival note and is subject to the nameplate / purchase order) |
| 【Controlair】Model family | 350SS filter regulator / 360SS regulator / 370SS filter; the 350SS standard models are 350-BA~BD (1/4″) and 350-DA~DD (1/2″), eight output-range variants |
| 【Controlair】Product positioning | 316 stainless steel filter regulator with fluorocarbon diaphragm, suitable for sour gas and offshore environments; meets NACE MR-0175 with stable, repeatable output and low pressure droop |
| Note | The specific configuration / certification codes of both products are subject to the nameplate, purchase order or official manual; items not listed in the available materials are not assumed |
III. Technical Data
Listed below by brand. The Midland section is taken from Chapter 10 "3500 Series Air Preparation Units" of the knowledge-base document "Rotork Midland Pneumatic Instrument Valves and Air Preparation Products — Technical Parameters and Model Code Rules", transcribed verbatim from the original sample PUB117-001-00 (Issue 07/19); model 8FRMSV07205 is decoded digit by digit using the original coding table in that chapter. The Controlair section is taken from the official ControlAir Chinese product specification page (models 350/360/370SS) and English catalogue; no dedicated document exists in the knowledge base, so these data were obtained online. Items not listed in the available materials are marked "not listed in the available materials; subject to the nameplate / purchase order or the official manual", and no values are assumed.
| Item | Specification |
|---|---|
| 【Midland】Brand / model | MIDLAND-ACS (Rotork); 8FRMSV07205 = 3500 series 1″ filter regulator (FRM manual drain, 316L, FKM, 0.5-7 bar, NPT, 5 µm) |
| 【Midland】Port size / type | 1″ (3500 series); FRM = filter regulator with manual drain (filtration + regulation in one unit) |
| 【Midland】Regulating range / maximum inlet pressure | Regulating range of this unit: 0.5-7 bar (code 07; full series 0.5-2/4/7/10 bar); maximum inlet pressure 20 bar for manual drain (17 bar for automatic drain) |
| 【Midland】Flow / flow coefficient | 7,800 L/min (274 SCFM) at 7 bar inlet, 6 bar secondary, 1 bar differential; Cv 8.8 (1″ FR) |
| 【Midland】Filtration / bowl volume | 5 µm (code 05; standard 40 µm sintered polypropylene); bowl volume 260 cc with sight window |
| 【Midland】Temperature / seals / materials | Standard -20 to +80°C, low-temperature version -50 to +80°C (/ATEX limited to +40°C, II 2G C T6); FKM seals (low temperature EPDM + fluorosilicone); body, bonnet, bowl and internals 316L |
| 【Midland】Connections / weight / dimensions | 1″ NPT (BSP optional), gauge port 1/8″ NPT, relief port 1/8″ NPT; weight 5.75 kg; dimensions (FR/manual drain) height 219 mm, width 120 mm, depth 70 mm, centre distance 145 mm, mounting holes 2-Ø8.5 |
| 【Midland】Approval / manual | ATEX II 2G c T6; original sample PUB117-001-00 Issue 07/19; no NACE option is listed for the 3500 series sample |
| 【Controlair】Brand / model | ControlAir; 350ss = Type 350SS stainless steel filter regulator (specific suffix subject to the nameplate / purchase order) |
| 【Controlair】Output pressure ranges | 0-30 psig (0-2.0 BAR), 0-60 psig (0-4.0 BAR), 0-100 psig (0-7.0 BAR), 0-150 psig (0-10.0 BAR); corresponding models 350-BA/BB/BC/BD (1/4″) and 350-DA/DB/DC/DD (1/2″) |
| 【Controlair】Maximum supply / relief / air consumption | Maximum supply 290 psig (21 BAR); relief capacity 1.0 SCFM (1.7 m³/hr) at 10 psig (0.7 BAR) above set point; air consumption 4 SCFH (0.1 m³/hr) |
| 【Controlair】Filtration / temperature | 25 µm standard, 5 µm optional; operating temperature -20°F to 180°F (-29°C to 82°C), low-temperature option -58° to +194°F (-50° to +90°C), automatic-drain option 32° to 185°F (0° to 85°C) |
| 【Controlair】Connections / materials / weight | Inlet/outlet 1/4″ or 1/2″ NPT, gauge ports (2) 1/4″ NPT, exhaust 1/8″ NPT; 316 stainless steel body, bonnet, filter and adjusting spring, fluorocarbon diaphragm and seals; weight 1/4″ 2.2 lbs (1.0 kg), 1/2″ 2.8 lbs (1.3 kg) |
| 【Controlair】Options / approval | Options: N non-relieving, F 5 µm filter element, A automatic drain (maximum supply 150 psig), K stainless steel handwheel; meets NACE MR-0175; specification documents 350_360_370spec.pdf / 350_360_370_instr.pdf |
Midland source: the knowledge-base document "Rotork Midland Pneumatic Instrument Valves and Air Preparation Products — Technical Parameters and Model Code Rules" (entry_id 948abc3d476e4c6298f870b729b8e189, Chapter 10, 3500 series), transcribed verbatim from the original sample PUB117-001-00 (Issue 07/19); model 8FRMSV07205 is decoded using the original Coding Chart in that chapter. For the Controlair part, the data were obtained via online search. Source: the official ControlAir Chinese product specification page "Models 350/360/370SS Stainless Steel Filter Regulators / Regulators", https://www.controlair.com.cn/a/shebeitigong/kongqiguolvqibuxiugang (350SS specification column, ordering information and options), and the ControlAir official catalogues Oil-Gas-Regulators_Catalog.pdf / ShortFormCatalog_10-26.pdf. Brand authorization background is referenced from the knowledge-base "Baoman Supply Capability Summary". The specific suffix of the Controlair 350ss is not listed item by item in the official manual and is subject to the nameplate / purchase order. Items not listed in the available materials are not assumed.
IV. Related Models
| Item | Specification |
|---|---|
| Midland series 3550 | 1/4″~3/4″ air-preparation units; filter regulator Cv 2.4/4.4/5.0, 40 µm element (5 µm optional); forms a size ladder with the 3500 series |
| Midland series 3575 | 1½″~2″ large air-preparation units, Cv 38/45, 25 µm 316 stainless steel element, bracket and gauge supplied as standard; for main air distribution headers |
| Controlair 360SS / 370SS | The 360SS is a standalone regulator in the same materials; the 370SS is the matching filter (370-BX 1/4″, 370-DX 1/2″); can be combined with the 350SS into two- or three-piece sets |
| Controlair series 380 / 390 | Large-flow all-316-stainless-steel filter regulator / regulator, 3/4″ and 1″ NPT, Cv 9.0/10.0, NACE approved, with optional automatic drain and 5 µm element |
V. Selection Guide & Common Models
Selection guide:Selection must be checked separately for each product. For the Midland 8FRMSV07205, first confirm from the code the port size (1″), type (FRM manual drain), regulating range (0.5-7 bar) and connection (NPT), then verify flow / Cv, maximum inlet pressure and ATEX requirements; no NACE option is listed for the 3500 series, so sour-service applications must be referred to the manufacturer. For the Controlair 350ss, first confirm the specific suffix from the nameplate (1/4″ or 1/2″ port and output pressure range), then verify maximum supply pressure, filtration, temperature and NACE MR-0175 requirements; the automatic-drain option has a 150 psig supply limit. The specific configuration of both products is subject to the nameplate / purchase order or the official manual. Please feel free to inquire for an item-by-item check against your air quality and operating conditions.
Common models:This arrival: the Midland-ACS filter regulator 8FRMSV07205 (a Rotork brand, 1″ 316L) and the Controlair 350SS stainless steel filter regulator. Midland parameters come from the knowledge-base compilation of the original samples and Controlair parameters from an officially sourced web page; both are for selection and spare-part verification only and are not guaranteed values. The specific configuration is subject to the nameplate / purchase order or the official manual, and items not listed in the available materials are not assumed.
These are some of the configurations we supply regularly. If you are working through a selection, or would like to know about availability of these models, feel free to get in touch — we can look at the right combination together based on your operating conditions.
Disclaimer: The information above is not guaranteed to remain valid and may be modified without separate notice. Please confirm the latest information at the time of inquiry.
Ordering & Inquiry
Baoman Industrial Technology (Chengdu) Co., Ltd Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China

简体中文
ENGLISH
