Fisher DVC6200f / DVC6200HC & DVC6205+DVC6215 Remote Positioners - Arrival
Baoman Industrial Technology (Chengdu) Co., Ltd. has recently received a shipment of Fisher FIELDVUE digital valve controllers, including the DVC6200f (FOUNDATION fieldbus), DVC6200HC (HART) and the DVC6205+DVC6215 remote-mount (split) positioners. Below are arrival photos and technical data for your reference.
I. Arrival Photos

Arrival photo (taken by Baoman Industrial, watermarked, serial information redacted)

Arrival and unboxing detail (taken by Baoman Industrial)

Arrival and unboxing detail (taken by Baoman Industrial)

Arrival and unboxing detail (taken by Baoman Industrial)
II. Brand & Model
| Item | Specification |
|---|---|
| Brand | Fisher (an Emerson brand), FIELDVUE series |
| Models | DVC6200f AD (FOUNDATION fieldbus, AD advanced diagnostics); DVC6200 HC (HART); DVC6205+DVC6215 remote-mount (split) positioner |
| Function | Intelligent digital valve controller converting 4-20 mA / bus signals into pneumatic output for control / on-off valve actuators |
| Position feedback | Non-contact, linkless Hall-effect valve position feedback with no mechanical wear |
| Remote-mount note | DVC6205 is the remote-mounted body; DVC6215 is the remote travel sensor (rated 125 °C), ordering option RM |
| Diagnostics | DVC6200f: FD/AD/PS; DVC6200HC: HC/AD/PD/ODV (ODV for HART version only) |
III. Technical Data
The DVC6200 family is divided by communication protocol into three basic instrument models: DVC6200H (HART), DVC6200F (FOUNDATION fieldbus) and DVC6200P (PROFIBUS PA), supporting single-acting direct / reverse and double-acting operation, with aluminium or stainless-steel housings. Key specifications are listed below.
| Item | Specification |
|---|---|
| Communication | DVC6200H: HART 5 / HART 7; DVC6200F: FOUNDATION fieldbus; DVC6200P: PROFIBUS PA |
| Input signal | 4-20 mA DC with split ranging; point-to-point loop minimum 10.5 V (analogue) / 11 V (HART); 30 VDC maximum, overcurrent / reverse polarity protection |
| Supply pressure | 10.0 bar (145 psig) maximum or actuator rating, whichever is lower; clean dry air or natural gas (ISA 7.0.01) |
| Output signal | Pneumatic output up to full supply pressure; travel span 0.4-9.5 bar; double-acting / single-acting direct / single-acting reverse |
| Independent linearity | Typical ±0.50% of output span |
| Ambient temperature | -40 to +85 °C (extreme-temperature fluorosilicone -52 to +85 °C; remote feedback unit -52 to +125 °C) |
| Enclosure rating | CSA/FM Type 4X, IP66; ATEX/IECEx IP66 |
| Connections | Supply / output 1/4 NPT internal, piping 3/8″, vent 3/8 NPT; electrical 1/2 NPT (optional M20) |
| Actuator compatibility | Linear travel 6.5-606 mm; rotary 45-90° |
| Weight | DVC6200 3.5 kg / DVC6205 4.1 kg / DVC6215 1.4 kg |
| Construction materials | A03600 low-copper aluminium (standard); thermoplastic polyester cover; nitrile elastomer (standard) / fluorosilicone (extreme temperature) |
| Hazardous-area certifications | CSA, FM, ATEX, IECEx, natural gas approval, GOST-R, INMETRO, KGS, NEPSI, PESO, TIIS |
| Steady-state air consumption | Standard relay <0.38 Nm³/h at 1.4 bar, <1.3 Nm³/h at 5.5 bar; low-consumption relay 0.056 / 0.184 Nm³/h average |
| Options | XT extreme temperature -52 °C, RM remote mount (DVC6205+DVC6215), LB low-consumption amplifier, H7 HART 7, SF 10-micron filter |
Source: Fisher '62.1: Digital Valve Controller' product bulletin D104363X0CN (2019-10); DVC6200 instruction manual D103409X012 Table 1-2; DVC6200 SIS manual D103557X012. Retrieved from the internal knowledge base document 'FISHER Valve Positioner Selection'. Parameters are subject to the latest official documentation.
IV. Related Models
| Item | Specification |
|---|---|
| DVC6200H | HART version, 4-20 mA input; diagnostics HC/AD/PD/ODV (ODV includes PST, HART only) |
| DVC6200P | PROFIBUS PA version for PROFIBUS network control valves |
| DVC6200 SIS | Safety instrumented system version with PST partial stroke test and SIL3 certification (exida) for ESD emergency shutdown |
| DVC2000 | Entry-level HART positioner, aluminium single-acting, built-in LCD + 4-key LUI |
| DVC7K | Next-generation digital valve controller, the official replacement for the discontinued HW1 version |
V. Selection Guide & Common Models
Selection guide:First select the model by communication protocol: DVC6200H for HART, DVC6200f for FOUNDATION fieldbus, DVC6200P for PROFIBUS, and DVC6200 SIS for safety instrumented service; then confirm hazard-area certification, housing material (aluminium / stainless steel), pneumatic action, position-feedback I/O, pressure gauge, thread connection, diagnostic level (HC/AD/PD/ODV or FD/PS) and options (XT/RM/LB/H7/SF) digit by digit. The DVC6205+DVC6215 in this shipment is a remote-mount (RM) configuration, suitable where actuator mounting space is limited or vibration isolation is needed. If you are working through a similar selection, feel free to get in touch — we can work out the right configuration together.
Common models:DVC6200f (FOUNDATION fieldbus), DVC6200HC (HART) and the DVC6205+DVC6215 remote-mount version. The above parameters are for selection reference; the actual configuration is subject to the order confirmation and official nameplate.
These are some of the configurations we supply regularly. If you are working through a selection, or would like to know about availability of these models, feel free to get in touch — we can look at the right combination together based on your operating conditions.
Disclaimer: The information above is not guaranteed to remain valid and may be modified without separate notice. Please confirm the latest information at the time of inquiry.
Ordering & Inquiry
Baoman Industrial Technology (Chengdu) Co., Ltd Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China

简体中文
ENGLISH
