Home » News Center » Product Arrival Display
ASCO S290A417 Stainless Steel Angle Seat Valve - Arrival & Data
ASCO S290A417 Stainless Steel Angle Seat Valve - Arrival & Data
ASCO S290A417 Stainless Steel Angle Seat Valve - Arrival & Data
ASCO S290A417 Stainless Steel Angle Seat Valve - Arrival & Data

ASCO S290A417 Stainless Steel Angle Seat Valve - Arrival & Data

Details

Baoman Industrial Technology (Chengdu) Co., Ltd. has recently received an ASCO S290A417 stainless-steel angle-seat valve. It belongs to the ASCO Series 290 (ordering prefix S290, also known as 8290), a pressure-operated (pilot-operated) 2/2-way angle-seat valve with a straight-through body in 316L stainless steel or bronze, available with 32/50/63/90/125 mm actuators and suitable for air, inert gases, steam, water and fuels. The specific bore / actuator configuration of the S290A417 is not given in the available points and is subject to the nameplate / purchase order. The information below is organized from the ASCO official product page and the Series 290 official data sheet, for your reference.

I. Arrival Photos

ASCO S290A417 stainless-steel angle-seat valve (Series 290 / 8290, pilot-operated 2/2 way) arrival photo 1
Arrival photo (taken by Baoman Industrial, watermarked, serial information redacted)

ASCO S290A417 stainless-steel angle-seat valve (Series 290 / 8290, pilot-operated 2/2 way) arrival photo 2
Arrival and unboxing detail (taken by Baoman Industrial)

ASCO S290A417 stainless-steel angle-seat valve (Series 290 / 8290, pilot-operated 2/2 way) arrival photo 3
Arrival and unboxing detail (taken by Baoman Industrial)

ASCO S290A417 stainless-steel angle-seat valve (Series 290 / 8290, pilot-operated 2/2 way) arrival photo 4
Arrival and unboxing detail (taken by Baoman Industrial)

II. Brand & Model

ItemSpecification
BrandASCO (an Emerson brand)
ModelS290A417 (ordering prefix S290, Series 290, also known as 8290)
TypePressure-operated (pilot-operated) 2/2-way angle-seat valve with straight-through body
Body material316L stainless steel or bronze; this arrival is the stainless-steel version
Sizes and connections3/8″ to 2-1/2″ NPT; clamp / butt-weld and other connections available
Actuators32 / 50 / 63 / 90 / 125 mm
S290A417 configurationSpecific bore / actuator configuration not listed in the available materials — subject to the nameplate / purchase order; no values are assumed

III. Technical Data

The ASCO Series 290 is a pressure-operated (pilot-operated) 2/2-way angle-seat valve with an anti-water-hammer design in which the fluid enters beneath the disc, and a straight-through flow path for low pressure loss. The body and trim are 316L stainless steel with a PTFE seat seal, and the maximum fluid temperature depends on the actuator material (-10 to 184 °C for plastic actuators, -20 to 140 °C for stainless-steel actuators). Options include position indication, feedback box, limit stop and proportional positioner (0-10 V / 0-20 mA / 4-20 mA). The specific bore / actuator configuration of the S290A417 is not given in the available points and is subject to the nameplate / purchase order — no values are assumed.

ItemSpecification
Pilot pressureMaximum 10 bar (150 psi); minimum per specification (approximately 2.5 bar and up for NC, under-disc inlet, 1/2″ with 63 mm actuator)
Maximum differential pressureAir / water up to 16 bar (240 psi); steam up to 10 bar (150 psi)
Maximum fluid temperaturePlastic actuator -10 to 184 °C; stainless-steel actuator -20 to 140 °C
Body / trim316L stainless steel
Seat sealPTFE
Design featuresAnti-water-hammer design with fluid entering beneath the disc; straight-through body for low pressure loss
MediaAir / inert gases / steam / water / fuels, etc.
CertificationsPED 2014/68/EU, IEC 61508 SIL2, ATEX / IECEx optional, RoHS
OptionsPosition indication, feedback box, limit stop, proportional positioner (0-10 V / 0-20 mA / 4-20 mA)
Sizes and actuators3/8″ to 2-1/2″ NPT; actuators 32 / 50 / 63 / 90 / 125 mm; specific configuration of the S290A417 subject to the nameplate / purchase order
Data sheetOfficial Series 290 data sheet PDF: catalog-series-290

Source (data obtained via online search): Emerson / ASCO official product page and the official Series 290 data sheet PDF (catalog-series-290). The specific bore / actuator configuration of the S290A417 is not listed in the available materials and is subject to the nameplate / purchase order; no values are assumed. Parameters are subject to the latest official documentation.

IV. Related Models

ItemSpecification
ASCO Series 290 (8290) other sizesOther sizes and actuator combinations in the same series, selected per data sheet catalog-series-290; this arrival is the S290A417
Other ASCO angle-seat valvesNo other angle-seat valve models are specifically listed in the available materials, so none are assumed; please confirm against official data sheets and nameplate information if required

V. Selection Guide & Common Models

Selection guide:Selection starts with the medium and operating conditions (air / water / steam / fuels, etc.), bore size and connection (3/8″ to 2-1/2″ NPT, clamp / butt-weld optional), then determines the actuator size (32 / 50 / 63 / 90 / 125 mm) against the maximum differential pressure (air / water up to 16 bar, steam up to 10 bar), maximum fluid temperature (-10 to 184 °C for plastic actuators, -20 to 140 °C for stainless-steel actuators) and pilot pressure (maximum 10 bar, approximately 2.5 bar and up for NC 1/2″ with 63 mm actuator). ATEX / IECEx is optional for hazardous areas, along with position indication, feedback box, limit stop or proportional positioner (0-10 V / 0-20 mA / 4-20 mA) as required. The specific bore / actuator configuration of the S290A417 in this arrival is not given in the available points and is subject to the nameplate / purchase order; no values are assumed. Complete ordering information is subject to official data sheet catalog-series-290 and confirmation at inquiry.

Common models:This arrival: ASCO S290A417 stainless-steel angle-seat valve (Series 290 / 8290, pilot-operated 2/2 way). Other sizes in the same series are selected per data sheet catalog-series-290; the specific configuration is subject to the nameplate / purchase order.

These are some of the configurations we supply regularly. If you are working through a selection, or would like to know about availability of these models, feel free to get in touch — we can look at the right combination together based on your operating conditions.

Disclaimer: The information above is not guaranteed to remain valid and may be modified without separate notice. Please confirm the latest information at the time of inquiry.

Ordering & Inquiry

The photos above show the models currently in stock. If you are working through a similar selection, or would like to know more about a model's configuration and availability, feel free to get in touch — we can look at the right combination together based on your valve type and signal requirements.
Tel: +86 028-60220547  |  Email: info@bit-cd.com
Baoman Industrial Technology (Chengdu) Co., Ltd   Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China

Application area