Home » News Center » Product Arrival Display
Bifold ASH06/ASH12/SH06 Filter Regulators - Arrival & Technical Data
Bifold ASH06/ASH12/SH06 Filter Regulators - Arrival & Technical Data
Bifold ASH06/ASH12/SH06 Filter Regulators - Arrival & Technical Data
Bifold ASH06/ASH12/SH06 Filter Regulators - Arrival & Technical Data
Bifold ASH06/ASH12/SH06 Filter Regulators - Arrival & Technical Data
Bifold ASH06/ASH12/SH06 Filter Regulators - Arrival & Technical Data

Bifold ASH06/ASH12/SH06 Filter Regulators - Arrival & Technical Data

Details

Baoman Industrial Technology (Chengdu) Co., Ltd. has recently received a shipment of Bifold filter regulators with ordering codes ASH12-FR-SR-MD-10-X1-L217, ASH12-FR-SR-MD-10-X1-02-L217, ASH06-FR-SR-MD-10-X1-L217 and SH06-FR-SR-MD-10-X3-L217, all of them 316L stainless-steel FR filter regulators (self-relieving SR, manual drain MD, 10 bar regulation range, L217 suffix). The ASH is the arctic-duty version of the SH (fluorosilicone seals, -60 °C), while the SH is the standard air-preparation unit. The information below is organized according to official data sheet BFD000 and the arrival ordering codes, for your reference.

I. Arrival Photos

Bifold ASH06 / ASH12 / SH06 filter regulators (FR/SR/MD, arrival ordering codes) arrival photo 1
Arrival photo (taken by Baoman Industrial, watermarked, serial information redacted)

Bifold ASH06 / ASH12 / SH06 filter regulators (FR/SR/MD, arrival ordering codes) arrival photo 2
Arrival and unboxing detail (taken by Baoman Industrial)

Bifold ASH06 / ASH12 / SH06 filter regulators (FR/SR/MD, arrival ordering codes) arrival photo 3
Arrival and unboxing detail (taken by Baoman Industrial)

Bifold ASH06 / ASH12 / SH06 filter regulators (FR/SR/MD, arrival ordering codes) arrival photo 4
Arrival and unboxing detail (taken by Baoman Industrial)

Bifold ASH06 / ASH12 / SH06 filter regulators (FR/SR/MD, arrival ordering codes) arrival photo 5
Arrival and unboxing detail (taken by Baoman Industrial)

Bifold ASH06 / ASH12 / SH06 filter regulators (FR/SR/MD, arrival ordering codes) arrival photo 6
Arrival and unboxing detail (taken by Baoman Industrial)

Bifold ASH06 / ASH12 / SH06 filter regulators (FR/SR/MD, arrival ordering codes) arrival photo 7
Arrival and unboxing detail (taken by Baoman Industrial)

Bifold ASH06 / ASH12 / SH06 filter regulators (FR/SR/MD, arrival ordering codes) arrival photo 8
Arrival and unboxing detail (taken by Baoman Industrial)

II. Brand & Model

ItemSpecification
BrandBifold
CategoryAir-preparation units / filter regulators (FR), distinguished by ordering codes in this arrival
ASH seriesArctic-duty version of the SH, with fluorosilicone seals down to -60 °C; this arrival includes ASH06 / ASH12
SH seriesStandard air-preparation unit with rolling-diaphragm balanced poppet valve, high flow and low pressure drop; this arrival includes SH06
SC seriesCompact series, not part of this arrival and not detailed here
Configuration in this arrivalFR filter regulator / SR self-relieving / MD manual drain / 10 regulation band / L217 suffix; filter elements X1 (ASH06, ASH12) and X3 (SH06)
Port-size codesCodes 06 and 12 both correspond to ½″ NPT

III. Technical Data

The ASH06 / ASH12 / SH06 in this arrival are all Bifold stainless-steel filter regulators using a rolling-diaphragm balanced poppet design for high flow and low pressure drop. The ASH is the arctic-duty version of the SH, fitted with fluorosilicone seals for -60 °C service. The body, bonnet and bowl are standard 316L stainless steel with a sintered 316L filter element; media include air, inert gases and natural gas (sweet / sour), with NACE MR-01-75 available as an option. Note: the ASH is specified as fluorosilicone to -60 °C in the selection table, while the L217 suffix is defined as low-temperature nitrile to -40 °C in the data sheet — these two conflict and should be confirmed with the manufacturer.

ItemSpecification
DesignRolling-diaphragm balanced poppet valve for high flow and low pressure drop; the ASH is the arctic-duty version of the SH
Body / bonnet / bowl316L stainless steel (standard configuration)
Filter elementSintered 316L stainless steel; filtration 5 µm (X1) / 20-30 µm (X3) / 40-50 µm (X4)
Connection sizes¼″ / ½″ / ¾″ / 1″ NPT (BSPP optional); port codes 06 and 12 both correspond to ½″ NPT
Regulation ranges0.03-2 / 0.03-4 / 0.20-6 / 0.25-8 / 0.40-10 bar, five bands
Maximum inlet pressureManual drain 20-40 bar; automatic drain 16 bar
Flow¼″ / ½″: Cv 2.6 (94 SCFM); high flow: Cv 4.5 (168 SCFM); 1″: Cv 14.2 (429 SCFM)
Seat sealsStandard low-temperature nitrile; fluorosilicone seals for the ASH
DiaphragmSilicone
Ambient temperatureL217 nitrile -40 to +130 °C; ASH fluorosilicone -60 to +100 °C
MediaAir / inert gases / natural gas (sweet / sour)
OptionsNACE MR-01-75
Data sheetBFD000 (Bifold, 2018-09)

Source: the Bifold official data sheet BFD000 (Bifold, 2018-09) recorded in the knowledge base and the original arrival ordering codes. Honest note: the ASH is specified as fluorosilicone seals to -60 °C in the selection table, while the L217 suffix is defined in the data sheet as low-temperature nitrile to -40 °C — these two conflict and should be confirmed with the manufacturer; the additional field '02' in ASH12-FR-SR-MD-10-X1-02-L217 is not specifically described in the available materials and is subject to manufacturer confirmation. Configurations not listed in the data sheet are not assumed. Parameters are subject to the latest official documentation.

IV. Related Models

ItemSpecification
Bifold SC compact seriesCompact air-preparation units, different in form from the ASH / SH standard units in this arrival
SH other port sizesThe SH series is also available with ¼″ / ¾″ / 1″ NPT connections (see data sheet BFD000); this arrival includes only SH06 (½″ NPT)
ASH other port sizesOther ASH sizes and configurations are selected per data sheet BFD000; this arrival includes only ASH06 / ASH12 (½″ NPT)
X4 filter element (40-50 µm)The data sheet lists an X4 filtration grade not present in this arrival; the filter elements here are X1 (5 µm) and X3 (20-30 µm)

V. Selection Guide & Common Models

Selection guide:Selection starts with distinguishing the ASH (arctic duty, fluorosilicone to -60 °C) from the SH (standard type), then confirming each function segment of the ordering code: FR filter regulator, SR self-relieving, MD manual drain, 10 regulation band and L217 suffix, together with the port code 06 / 12 (both ½″ NPT) and filter element X1 (5 µm) / X3 (20-30 µm). The regulation range must be selected from the five bands 0.03-2 / 0.03-4 / 0.20-6 / 0.25-8 / 0.40-10 bar, and the maximum inlet pressure (manual drain 20-40 bar, automatic drain 16 bar), media (air / inert gases / natural gas, including sweet and sour gas) and whether NACE MR-01-75 is required should be checked. Honest note: the definition of ASH fluorosilicone to -60 °C conflicts with the L217 low-temperature nitrile to -40 °C, and the '02' field in ASH12-...-02-L217 is not specifically described in the available materials — both should be confirmed with the manufacturer. Complete ordering codes are subject to official data sheet BFD000 and confirmation at inquiry.

Common models:Arrival ordering codes: ASH12-FR-SR-MD-10-X1-L217, ASH12-FR-SR-MD-10-X1-02-L217, ASH06-FR-SR-MD-10-X1-L217 and SH06-FR-SR-MD-10-X3-L217 (filter element X1 is 5 µm, X3 is 20-30 µm).

These are some of the configurations we supply regularly. If you are working through a selection, or would like to know about availability of these models, feel free to get in touch — we can look at the right combination together based on your operating conditions.

Disclaimer: The information above is not guaranteed to remain valid and may be modified without separate notice. Please confirm the latest information at the time of inquiry.

Ordering & Inquiry

The photos above show the models currently in stock. If you are working through a similar selection, or would like to know more about a model's configuration and availability, feel free to get in touch — we can look at the right combination together based on your valve type and signal requirements.
Tel: +86 028-60220547  |  Email: info@bit-cd.com
Baoman Industrial Technology (Chengdu) Co., Ltd   Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China

Application area