Fisher 3582i / 4211 / 167DAS - Positioner, Transmitter & Switching Valve Arrival
Baoman Industrial Technology (Chengdu) Co., Ltd. has recently received a shipment of Fisher products in a three-model combination: the 3582i electro-pneumatic valve positioner (the 3582 pneumatic positioner fitted with a 582i electro-pneumatic converter), the 4211 electronic position transmitter (4200 series) and the 167DAS stainless-steel switching valve (a three-way switching valve of the 167D series). The three cover pneumatic / electro-pneumatic positioning, valve-position feedback transmission and pilot supply switching respectively. Each is introduced below with verifiable technical data for your reference.
I. Arrival Photos

Arrival photo (taken by Baoman Industrial, watermarked, serial information redacted)

Arrival and unboxing detail (taken by Baoman Industrial)

Arrival and unboxing detail (taken by Baoman Industrial)

Arrival and unboxing detail (taken by Baoman Industrial)

Arrival and unboxing detail (taken by Baoman Industrial)
II. Brand & Model
| Item | Specification |
|---|---|
| Brand | Fisher (an Emerson brand) |
| Arrival model combination | 3582i electro-pneumatic valve positioner / 4211 electronic position transmitter / 167DAS stainless-steel switching valve (three-model combination) |
| ① 3582i | Electro-pneumatic version of the 3582 pneumatic single-acting positioner, fitted with a 582i electro-pneumatic converter (current input); pneumatic signal 3-15 or 6-30 psi (0.2-1.0 or 0.4-2.0 bar); adjustable zero / span with split-ranging support and simple forward / reverse action switching; certifications ATEX Group II Cat 2 Gas & Dust, CUTR, PED. The specific current input / accuracy of the 3582i is not listed in the available materials — refer to the official manual. |
| ② 4211 | Electronic position transmitter of the 4200 series (the 4200 series was discontinued in 2025 and replaced by the 4400); 4-20 mA DC output; reference accuracy ±1% of output span; arrival part number 49A7891X0J2. |
| ③ 167DAS | Three-way switching valve of the 167D series (167DA/167DAS are three-way, 167D/167DS are two-way), with optional stainless-steel construction; maximum inlet pressure 400 psig / 27.6 bar; this arrival is the stainless-steel version. |
III. Technical Data
This shipment is a three-model combination, described as follows. The 3582i is the electro-pneumatic version of the 3582 pneumatic single-acting positioner fitted with a 582i electro-pneumatic converter, with current input, adjustable zero / span and split-ranging support, simple forward / reverse action switching, minimal sensitivity to supply-pressure changes and valve loading, and body, component and gasket materials suited to harsh environments. The 4211 is an electronic position transmitter of the 4200 series, converting valve position into a 4-20 mA DC output signal. The 167DAS is a three-way switching valve of the 167D series that supplies stable, reduced gas pressure to pilot-operated controllers and pneumatic instruments. The specific current input / accuracy of the 3582i is not given in the available points and is marked as not listed, subject to the official manual — no values are assumed.
| Item | Specification |
|---|---|
| 3582i | Type | 3582 pneumatic single-acting positioner + 582i electro-pneumatic converter (electro-pneumatic, current input) |
| 3582i | Pneumatic signal | 3-15 or 6-30 psi (0.2-1.0 or 0.4-2.0 bar) |
| 3582i | Zero / span and action | Adjustable zero / span with split-ranging support; simple forward / reverse action switching |
| 3582i | Performance | Minimal sensitivity to supply-pressure changes and valve loading; body, component and gasket materials suited to harsh environments |
| 3582i | Current input / accuracy | Not listed in the available materials — refer to the official manual (Instruction Manual: Fisher 3582 and 3582i Positioners and 582i Electro-Pneumatic Converter) |
| 3582i | Certifications | ATEX Group II Cat 2 Gas & Dust, CUTR, PED |
| 4211 | Series | Electronic position transmitter of the 4200 series (discontinued in 2025, replaced by the 4400) |
| 4211 | Output | 4-20 mA DC |
| 4211 | Reference accuracy | ±1% of output span |
| 4211 | Repeatability | ±0.25% |
| 4211 | Power supply | 11-30 V DC, 20 mA max (24 V DC recommended) |
| 4211 | Electrical connections | One 1/2 NPT connection on each side |
| 4211 | Enclosure rating | NEMA 4X / IP66 |
| 4211 | Certifications | CSA / FM / ATEX / IECEx (intrinsic safety, explosion proof, dust protection) |
| 4211 | Arrival part number | 49A7891X0J2 |
| 4211 | Document numbers | D200354X012 (4200 instruction manual); 4400 data sheet D104739X0CN |
| 167DAS | Series / type | Three-way switching valve of the 167D series (167DA/167DAS three-way, 167D/167DS two-way), optional stainless-steel construction |
| 167DAS | Application | Supplies stable, reduced gas pressure to pilot-operated controllers and pneumatic instruments |
| 167DAS | Ports | Ports A and C: 1/4 or 1/2 NPT; exhaust / control ports D and B: 1/4 NPT |
| 167DAS | Maximum inlet pressure | 400 psig / 27.6 bar |
| 167DAS | Temperature range | Standard bolts -29 to 82 °C; stainless-steel bolts -40 to 82 °C; FKM trim -18 to 149 °C |
| 167DAS | Weight | Approximately 1 kg for the 167DAS |
Source: (1) 3582i data was obtained via online search, from the Emerson official fisher-3582 product page and the official Instruction Manual: Fisher 3582 and 3582i Positioners and 582i Electro-Pneumatic Converter; (2) 4211 data comes from the knowledge base 'Fisher Valve Position Transmitter Technical Compilation — FIELDVUE 4400 and 4200 Series' (document numbers D200354X012 and 4400 data sheet D104739X0CN); (3) 167DAS data was obtained via online search, from the Emerson official fisher-167d product page and the 167D series data sheet. The 3582i / 167DAS data comes from online search. The specific current input / accuracy of the 3582i is not listed in the available materials and is subject to the official manual. Parameters are subject to the latest official documentation.
IV. Related Models
| Item | Specification |
|---|---|
| 3582 / 3582i | The 3582 is a pneumatic single-acting positioner; the 3582i is its electro-pneumatic version fitted with a 582i converter — this arrival is the 3582i |
| 582i | Electro-pneumatic converter that combines with the 3582 to form the 3582i electro-pneumatic positioner |
| 4200 series / 4400 | The 4200 series to which the 4211 belongs was discontinued in 2025 and replaced by the 4400 series (4400 data sheet D104739X0CN) |
| 167D series | 167D/167DS are two-way and 167DA/167DAS are three-way switching valves; this arrival is the 167DAS stainless-steel three-way version |
V. Selection Guide & Common Models
Selection guide:This is a three-model combination shipment. For selection, confirm each separately: for the 3582i, specify the pneumatic signal range (3-15 or 6-30 psi), action (forward / reverse), split-ranging requirement and hazardous-area certifications (ATEX / CUTR / PED); its specific current input / accuracy is not listed in the available materials and is subject to the official manual. For the 4211, confirm the 4-20 mA DC output, power supply (24 V DC recommended), 1/2 NPT electrical connections on both sides and certifications (intrinsic safety / explosion proof / dust protection), noting that the 4200 series has been discontinued and replaced by the 4400, with arrival part number 49A7891X0J2. For the 167DAS, confirm the three-way switching function, port sizes (A/C: 1/4 or 1/2 NPT; D/B: 1/4 NPT), inlet pressure 400 psig / 27.6 bar, temperature range and stainless-steel construction. Complete ordering codes are subject to the official data sheets, manuals and confirmation at inquiry.
Common models:This arrival combination: Fisher 3582i electro-pneumatic valve positioner (with 582i converter), 4211 electronic position transmitter (4200 series, part number 49A7891X0J2) and 167DAS stainless-steel three-way switching valve (167D series).
These are some of the configurations we supply regularly. If you are working through a selection, or would like to know about availability of these models, feel free to get in touch — we can look at the right combination together based on your operating conditions.
Disclaimer: The information above is not guaranteed to remain valid and may be modified without separate notice. Please confirm the latest information at the time of inquiry.
Ordering & Inquiry
Baoman Industrial Technology (Chengdu) Co., Ltd Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China

简体中文
ENGLISH
