SAMSON 3731-3 Ex d HART Smart Positioner - Technical Data & Selection
1. Product Overview
The SAMSON 3731-3 is an Ex d flameproof HART intelligent electro-pneumatic valve positioner in the 3731 family. It shares a hybrid technology platform with the 3730 series (analog PD control + microprocessor) but uses a flameproof (Ex d / Flameproof) cast-aluminum or stainless-steel enclosure, allowing local operation via a single-knob menu in hazardous areas. It features a 4-20 mA two-wire loop with HART communication, LCD, autotune and EXPERTplus diagnostics. The complete ordering code is 15 digits, based on the separate data sheet T 8387-3 EN, and must not be confused with the 16-digit code of the 3730-3.

SAMSON 3731-3 positioner official product image (official image, for selection reference only)
Arrival Photos (taken by Baoman Industrial)

SAMSON 3731 arrival photo, taken by Baoman Industrial, watermarked, identification details masked

SAMSON 3731 arrival photo, taken by Baoman Industrial, watermarked, identification details masked

SAMSON 3731 arrival photo, taken by Baoman Industrial, watermarked, identification details masked

SAMSON 3731 arrival photo, taken by Baoman Industrial, watermarked, identification details masked

SAMSON 3731 arrival photo, taken by Baoman Industrial, watermarked, identification details masked
2. Technical Description
Flameproof construction: Uses an Ex d flameproof enclosure (cast aluminum EN AC-43400 chromated + powder coated, or stainless steel), which may include Ex ia intrinsically safe options; degree of protection IP66 / NEMA 4X, weight approximately 2.5 kg. Suitable for industrial applications in Zone 1 hazardous areas requiring flameproof devices.
Control and communication: Wear-free calibrated position sensor + analog i/p + pneumatic amplifier + microprocessor closed-loop control; 4-20 mA two-wire setpoint (reverse polarity protected, minimum span 4 mA, static destruction limit 40 V, internal current limiting 60 mA), HART-band impedance approximately 455 Ω for reception and about 185 Ω for transmission. Features a 180°-rotatable alphanumeric LCD, single-knob autotune and EXPERTplus diagnostics (including PST partial stroke test).
Ordering code structure: Complete ordering number = 3731-3 + 15 digits, with the 1st digit being the "version/communication digit" (3 = HART). Compared with the 3731-5, the 3731-3 has a 4-20 mA loop and therefore has an additional "fail-action" digit, uses 2 digits for explosion protection, and offers a more complete option set. See Section 4 digit by digit.
3. Key Technical Data
| Item | Description |
|---|---|
| Communication protocol | HART field communication protocol (4-20 mA two-wire) |
| Setpoint signal | 4-20 mA, reverse polarity protected, minimum span 4 mA; static destruction limit 40 V, internal current limiting 60 mA |
| Load impedance | ≤450 Ω at 20 mA |
| Supply air pressure | 3731-321/327: 1.4-7 bar; 3731-323: 1.4-6 bar |
| Travel range | Direct 3277: 3.6-30 mm; IEC 60534-6-1 bracket: 3.6-300 mm; rotary: 24°-100° |
| Accuracy | Hysteresis ≤0.3%; sensitivity ≤0.1%; flow characteristic deviation ≤1% |
| Degree of protection | IP66 / NEMA 4X |
| Type of explosion protection | Ex d flameproof (cast aluminum or stainless steel enclosure), may include Ex ia intrinsically safe options |
| Electrical connection | 2×1/2 NPT or optional 2×M20×1.5; terminals 2.5 mm² |
| Self-diagnostics | EXPERT / EXPERTplus (including PST), NE107 status |
| Ambient temperature | -40 ~ +80 °C (certificate limits apply separately) |
| Ordering code length | 15 digits (separate data sheet T 8387-3 EN) |
| Functional safety | IEC 61508: SIL 2 (single) / SIL 3 (redundant) |
4. Selection Guide (Complete Ordering Code)
Complete ordering number = 3731-3 + 15 digits, with the version digit fixed at 3. The table below lists the available codes and meanings digit by digit:
| Position | Field | Available codes / Meaning |
|---|---|---|
| 1 | Communication/version digit | 3 = HART version (with LCD, autotune, HART communication) |
| 2-3 | Explosion protection (2 digits) | 21 = ATEX II 2G Ex db IIC T6 Gb (incl. Ex db eb / Ex db[ia] / Ex ia; II 2D Ex tb IIIC T80°C Db IP66); 23 = FM; 24 = EAC Ex; 27 = JIS Ex d IIC T6 |
| 4-5 | Options (2 digits) | 00 = none; 01 = position transmitter; 03 = binary input; 05 = forced venting; 06 = binary output (NAMUR/PLC) |
| 6 | Diagnostics | 4 = EXPERTplus (control valve expert diagnostics, including partial stroke test PST) |
| 7 | Electrical connection thread | 1 = 2×M20×1.5; 2 = 2×1/2 NPT |
| 8 | Fail action / emergency action | 0 = emergency shut-off when setpoint = 0 mA (marked "no longer available" in T 8387-3 EN, no longer offered); 1 = emergency shut-off when setpoint falls below 3.85 mA, currently usually ordered as 1 |
| 9-11 | Explosion certification (3 digits) | 211 = CCC Ex / NEPSI; 212 = IECEx; 213 = EAC Ex; 215 = KCS; 216 = INMETRO; 217 = TR CMU 1055 |
| 12 | Special application | 0 = none |
| 13-15 | Special version | 000 = none |
5. Complete Model Enumeration
The following are verified examples of complete 15-digit ordering codes for the 3731-3 with digit-by-digit breakdown:
| Complete ordering code | Digit-by-digit breakdown / Meaning |
|---|---|
3731-321004112110000 | Version 3 (HART) · explosion protection 21 (ATEX Ex db flameproof) · options 00 (no additions) · diagnostics 4 (EXPERTplus) · electrical interface 1 (M20×1.5) · fail action 1 (emergency shut-off at setpoint <3.85 mA) · certification 211 (CCC / NEPSI) · special application 0 (none) · special version 000 (none) |
3731-321004122110000 | Version 3 (HART) · explosion protection 21 (ATEX Ex db) · options 00 · diagnostics 4 · electrical interface 2 (2×1/2 NPT) · fail action 1 · certification 211 (CCC / NEPSI) · application 0 · version 000 |
3731-321014112110000 | Version 3 (HART) · explosion protection 21 (ATEX Ex db) · options 01 (position transmitter) · diagnostics 4 · interface 1 (M20×1.5) · fail action 1 · certification 211 · application 0 · version 000 |
Note: The initial item has been verified against official T 8387-3 EN; the other two are combination illustrations based on the digit table in Section 4 (only the "electrical interface" and "options" digits are replaced); please consult us for confirmation for formal orders.
6. Related Models
| Related model | Type / Application |
|---|---|
| 3731-5 | Ex d flameproof FF type (15-digit code, T 8387-5 EN) |
| 3730-3 | HART intrinsically safe type (non-flameproof), 16-digit code, T 8384-3 EN |
| 3730-6 | HART + pressure monitoring type, separate data sheet T 8384-6 EN (14 digits) |
| 3725 | Digital basic positioner, 10-digit ordering code, intrinsically safe Ex ia |
| 3277 actuator | Pneumatic diaphragm actuator directly integrated with the positioner (linear) |
7. Common Spare Parts
| Component | Description / Part number |
|---|---|
| Position sensor assembly | Part number: please consult us for confirmation |
| i/p converter | Part number: please consult us for confirmation |
| Pneumatic amplifier | Part number: please consult us for confirmation |
| Display and operating unit (LCD and buttons) | Part number: please consult us for confirmation |
| Flameproof housing and cover assembly | Part number: please consult us for confirmation |
| Cable gland (M20 / 1/2 NPT) | Part number: please consult us for confirmation |
8. Matching Accessories
| Accessory | Model / Specification | Application |
|---|---|---|
| Filter pressure-reducing valve | Please consult us for confirmation | Filters and stabilizes the instrument air supply pressure |
| Position transmitter | Please consult us for confirmation | Outputs 4-20 mA valve position feedback signal |
| Inductive limit switch | SJ2-SN (normally closed contact) | Limit position feedback |
| Solenoid valve / forced venting assembly | 24 V DC | Emergency action / forced venting |
| Binary input / output module | Please consult us for confirmation | Switching signal input and output |
| Reversing amplifier | 3710 | For use with double-acting actuators |
| Commissioning software | TROVIS-VIEW (SSP interface) / DTM | Parameter setting, commissioning and diagnostics |
9. Disclaimer
The information above is not guaranteed to remain valid at all times. Subsequent changes will not be notified separately. Please confirm the latest information at the time of inquiry.
10. Sources & Contact
Ordering & Inquiry
Baoman Industrial Technology (Chengdu) Co., Ltd Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China

简体中文
ENGLISH
