Home » Products » Samson
SAMSON 3730-1 Digital Positioner (No Communication) - Technical Data
SAMSON 3730-1 Digital Positioner (No Communication) - Technical Data
SAMSON 3730-1 Digital Positioner (No Communication) - Technical Data
SAMSON 3730-1 Digital Positioner (No Communication) - Technical Data
SAMSON 3730-1 Digital Positioner (No Communication) - Technical Data
SAMSON 3730-1 Digital Positioner (No Communication) - Technical Data

SAMSON 3730-1 Digital Positioner (No Communication) - Technical Data

Details

1. Product Overview

The SAMSON 3730-1 is a non-communication digital electro-pneumatic valve positioner in the 3730 family. It adds a microprocessor in addition to the basic control platform, receives the 4-20 mA setpoint, drives a pneumatic linear or rotary actuator to form a valve position closed loop, and is equipped with an LCD display and a single rotary knob supporting autotune. Compared with the purely mechanical 3730-0, the 3730-1 is more convenient for local commissioning and for adapting valve/actuator characteristics; however, it has no fieldbus or HART communication and does not provide the EXPERTplus diagnostics of the 3730-2/3.

SAMSON 3730-1 non-communication digital positioner official product image
SAMSON 3730-1 positioner official product image (official image, for selection reference only)

Arrival Photos (taken by Baoman Industrial)

SAMSON 3730 Smart Electropneumatic Positioner arrival photo
SAMSON 3730 arrival photo, taken by Baoman Industrial, watermarked, identification details masked

SAMSON 3730 Smart Electropneumatic Positioner arrival photo
SAMSON 3730 arrival photo, taken by Baoman Industrial, watermarked, identification details masked

SAMSON 3730 Smart Electropneumatic Positioner arrival photo
SAMSON 3730 arrival photo, taken by Baoman Industrial, watermarked, identification details masked

SAMSON 3730 Smart Electropneumatic Positioner arrival photo
SAMSON 3730 arrival photo, taken by Baoman Industrial, watermarked, identification details masked

SAMSON 3730 Smart Electropneumatic Positioner arrival photo
SAMSON 3730 arrival photo, taken by Baoman Industrial, watermarked, identification details masked

2. Technical Description

Control principle: A closed loop formed by a valve position sensing element, an analog i/p converter, a pneumatic amplifier and a microprocessor electronic unit. The microprocessor compares the actual valve position with the setpoint and outputs a pneumatic control signal according to the control algorithm; initialization/autotune is supported, automatically adapting to valve and actuator characteristics, with parameters stored in non-volatile memory.

Display and operation: A rotatable LCD and a single rotary knob; parameters are listed in a single-level menu, allowing local viewing and setting without entering submenus. This is the main increment of the 3730-1 over the 3730-0.

Functional boundaries: No HART / PROFIBUS PA / FOUNDATION Fieldbus communication; no EXPERTplus diagnostics (for these diagnostics, select the 3730-2 or 3730-3). Optional additional functions include inductive limit switch, solenoid valve, position transmitter, separate position sensor, etc.

Ordering code structure: Complete ordering number = "3730-1" + 16 digits, using a grouped, digit-by-digit structure; its explosion-protection and additional-equipment positions are essentially similar to those of the 3730-3, but there is no fixed bus-identification position (the 4th digit is not required to be 0). For detailed positions refer to T 8384-2 EN; please consult us for confirmation of the final code.

Explosion-protection boundary: The 3730-1 belongs to the 3730-0~5 basic series and offers only intrinsically safe Ex ia, Ex nA non-sparking and dust explosion-protection options; it does not include flameproof Ex d. If the application explicitly requires a flameproof enclosure, select the 3731 series.

3. Key Technical Data

ItemDescription
Input signal4-20 mA two-wire (no communication superimposed)
Supply air pressure1.4-7.0 bar (limitable by software)
Travel range3.6-300 mm (linear, depending on mounting)
Rotation angle range24°-100° (rotary)
Control typeMicroprocessor control + autotune
Display and operationLCD + single rotary knob, rotatable reading
Degree of protectionIP66
Type of explosion protectionMainly intrinsically safe Ex ia, including Ex nA non-sparking and dust explosion-protection options; no flameproof Ex d
Ambient temperature-40 ~ +80 °C (depending on enclosure and explosion-protection options)
MountingDirect integration / NAMUR / IEC 60534-6-1 / VDI-VDE 3845 / 3847
Source: SAMSON official data sheets T 8384-2 EN, NA 0122; specific values are subject to the official data sheets.

4. Selection Guide (Complete Ordering Code)

Complete ordering number = 3730-1 + 16 digits. The table below is a quick reference of the grouped, digit-by-digit structure (positions essentially similar to the 3730-3, but without a fixed bus position); for detailed positions refer to T 8384-2 EN:

PositionItemAvailable codes / Meaning
P1Explosion protection0 = no explosion protection; 1 = ATEX Ex ia intrinsically safe; 3 = CSA intrinsically safe; 5 = dust explosion protection; 8 = Ex nA non-sparking
P2Inductive limit switch0 = none; 1 = SJ2-SN (normally closed contact)
P3Solenoid valve0 = none; 4 = with, 24 V DC
P4-P7Additional equipment (mutually exclusive group)0000 = none; 1000 = position transmitter (4-20 mA feedback); 0100 = separate position sensor; other combinations per data sheet
P8Self-diagnostics0 = standard (3730-1 does not include EXPERTplus)
P9-P14Fixed / reserved positionsFill in according to the data sheet; usually 0 for standard orders
P15-P16Special version00 = standard; other additional certifications per data sheet
Source: SAMSON official data sheets T 8384-2 EN, NA 0122. For positions marked "per data sheet", please consult us for confirmation; do not make assumptions.

5. Complete Model Enumeration

The following lists the complete ordering code formats for the 3730-1 (16 digits). The complete codes shown here are illustrations constructed according to the grouped, digit-by-digit structure; for the meaning of each digit refer to Section 4. For formal orders, the code generated by the SAMSON official selection tool shall prevail (please consult us for confirmation).

Complete ordering codeDigit-by-digit breakdown / Meaning
3730-1 1000000000000000P1=1 (ATEX Ex ia intrinsically safe); P2=0 no limit switch; P3=0 no solenoid valve; P4-P7=0000 no additional equipment; P8=0 standard; P15-P16=00 standard version
3730-1 1100000000000000P1=1 (ATEX Ex ia); P2=1 (SJ2-SN inductive limit switch); remaining digits standard configuration
3730-1 1001000000000000P1=1 (ATEX Ex ia); P4-P7=1000 (with 4-20 mA position transmitter feedback); remaining digits standard configuration

Note: The above is for structural illustration only, to show that "3730-1 must be followed by a full 16-digit code"; it does not represent a confirmed model ready for direct ordering. For any uncertain position, always state "Please consult us for confirmation".

6. Related Models

Related modelType / Application
3730-0Non-communication basic control type, no microprocessor, purely mechanical
3730-2Non-communication full-featured type, with parameterization and EXPERTplus diagnostics
3730-3HART full-featured type, a widely used communication version in this family
3725Digital basic positioner, 10-digit ordering code, intrinsically safe Ex ia
3277 actuatorPneumatic diaphragm actuator directly integrated with the positioner (linear)

7. Common Spare Parts

ComponentDescription / Part number
Position sensor assemblyPart number: please consult us for confirmation
i/p converterPart number: please consult us for confirmation
Pneumatic amplifierPart number: please consult us for confirmation
Display and operating unit (LCD and buttons)Part number: please consult us for confirmation
Housing and cover assemblyPart number: please consult us for confirmation
Source: SAMSON official data sheet NA 0122. Before ordering, please verify the complete model and configuration with us for part numbers.

8. Matching Accessories

AccessoryModel / SpecificationApplication
Filter pressure-reducing valvePlease consult us for confirmationFilters and stabilizes the instrument air supply pressure
Position transmitterPlease consult us for confirmationOutputs 4-20 mA valve position feedback signal
Inductive limit switchSJ2-SN (normally closed contact)Limit position feedback
Solenoid valve24 V DCForced venting / emergency action
Reversing amplifier3710For use with double-acting actuators
Commissioning softwareTROVIS-VIEW (SSP interface)Parameter setting and commissioning

9. Disclaimer

The information above is not guaranteed to remain valid at all times. Subsequent changes will not be notified separately. Please confirm the latest information at the time of inquiry.

10. Sources & Contact

Source: SAMSON official data sheets T 8384-2 EN, NA 0122.

Ordering & Inquiry

If you need help confirming model numbers, configurations or availability, please feel free to contact us. We can assist with selection and technical confirmation based on your operating conditions and signal requirements.
Tel: +86 028-60220547  |  Email: info@bit-cd.com
Baoman Industrial Technology (Chengdu) Co., Ltd   Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China

Application area