Home » Products » Samson
SAMSON 3730-0 Basic Electropneumatic Positioner - Technical Data & Selection
SAMSON 3730-0 Basic Electropneumatic Positioner - Technical Data & Selection
SAMSON 3730-0 Basic Electropneumatic Positioner - Technical Data & Selection
SAMSON 3730-0 Basic Electropneumatic Positioner - Technical Data & Selection
SAMSON 3730-0 Basic Electropneumatic Positioner - Technical Data & Selection
SAMSON 3730-0 Basic Electropneumatic Positioner - Technical Data & Selection

SAMSON 3730-0 Basic Electropneumatic Positioner - Technical Data & Selection

Details

1. Product Overview

The SAMSON 3730-0 is a basic, non-communication electro-pneumatic valve positioner in the 3730 family. It contains no microprocessor and uses a purely mechanical control structure: it receives the 4-20 mA setpoint from the control system and drives a pneumatic linear or rotary actuator through an i/p converter and a pneumatic amplifier stage, forming a closed loop via mechanical valve position feedback. Compared with the 3730-1/2/3 of the same family, the 3730-0 does not provide LCD display, autotune, parameterization or EXPERTplus diagnostics; it is positioned for basic applications where the only requirement is to reliably convert the 4-20 mA signal into a valve position.

SAMSON 3730-0 basic non-communication positioner official product image
SAMSON 3730-0 positioner official product image (official image, for selection reference only)

Arrival Photos (taken by Baoman Industrial)

SAMSON 3730 Smart Electropneumatic Positioner arrival photo
SAMSON 3730 arrival photo, taken by Baoman Industrial, watermarked, identification details masked

SAMSON 3730 Smart Electropneumatic Positioner arrival photo
SAMSON 3730 arrival photo, taken by Baoman Industrial, watermarked, identification details masked

SAMSON 3730 Smart Electropneumatic Positioner arrival photo
SAMSON 3730 arrival photo, taken by Baoman Industrial, watermarked, identification details masked

SAMSON 3730 Smart Electropneumatic Positioner arrival photo
SAMSON 3730 arrival photo, taken by Baoman Industrial, watermarked, identification details masked

SAMSON 3730 Smart Electropneumatic Positioner arrival photo
SAMSON 3730 arrival photo, taken by Baoman Industrial, watermarked, identification details masked

2. Technical Description

Control principle: Purely mechanical / electro-pneumatic conversion closed-loop control, with no microprocessor and no digital communication interface. The actual valve position is detected by a mechanical feedback element, compared with the setpoint, and then drives the pneumatic amplifier to output a signal pressure, completing valve positioning. There is no initialization/autotune process; before commissioning, set the mechanical zero and travel according to the instructions.

Functional positioning: No LCD, no rotary-knob menu, no autotune, and no EXPERT/EXPERTplus diagnostics or NE107 status output. If LCD and autotune are required, select the 3730-1; if parameterization and EXPERTplus diagnostics are required, select the 3730-2; if HART communication is required, select the 3730-3.

Ordering code structure: Complete ordering number = "3730-0" + 16 digits, using a "grouped, digit-by-digit" structure. Its explosion-protection and additional-equipment positions are essentially similar to those of the 3730-3, but there is no fixed bus-identification position (the 4th digit is not required to be 0). For the detailed digit positions of the three basic types 3730-0/1/2, refer to their respective data sheets (T 8384-1/2 EN); please consult us for confirmation of the final code.

Explosion-protection boundary: The 3730-0 belongs to the 3730-0~5 basic series and offers only intrinsically safe Ex ia, Ex nA non-sparking and dust explosion-protection options; it does not include flameproof Ex d. If the application explicitly requires a flameproof enclosure, select the 3731 series.

3. Key Technical Data

ItemDescription
Input signal4-20 mA two-wire (no HART superimposed)
Supply air pressure1.4-7.0 bar
Travel range3.6-300 mm (linear, depending on mounting)
Rotation angle range24°-100° (rotary)
Control typePurely mechanical, no microprocessor, no autotune
Degree of protectionIP66 (with terminal box)
Type of explosion protectionMainly intrinsically safe Ex ia, including Ex nA non-sparking and dust explosion-protection options; no flameproof Ex d
Display and diagnosticsNo LCD, no EXPERTplus diagnostics
Ambient temperature-40 ~ +80 °C (depending on enclosure and explosion-protection options)
MountingDirect integration / NAMUR / IEC 60534-6-1 / VDI-VDE 3845 / 3847
Source: SAMSON official data sheets T 8384-1 EN, T 8384-2 EN, NA 0122; specific values are subject to the official data sheets.

4. Selection Guide (Complete Ordering Code)

Complete ordering number = 3730-0 + 16 digits. The table below is a quick reference of the grouped, digit-by-digit structure (positions essentially similar to the 3730-3, but without a fixed bus position); for detailed positions refer to T 8384-1/2 EN:

PositionItemAvailable codes / Meaning
P1Explosion protection0 = no explosion protection; 1 = ATEX Ex ia intrinsically safe; 3 = CSA intrinsically safe; 5 = dust explosion protection; 8 = Ex nA non-sparking
P2Inductive limit switch0 = none; 1 = SJ2-SN (normally closed contact)
P3Solenoid valve0 = none; 4 = with, 24 V DC
P4-P7Additional equipment (mutually exclusive group)0000 = none; 1000 = position transmitter (4-20 mA feedback); 0100 = separate position sensor; other combinations per data sheet
P8Self-diagnostics0 = standard (3730-0 has no EXPERTplus)
P9-P14Fixed / reserved positionsFill in according to the data sheet; usually 0 for standard orders
P15-P16Special version00 = standard; other additional certifications per data sheet
Source: SAMSON official data sheets T 8384-1 EN, T 8384-2 EN, NA 0122. For positions marked "per data sheet", please consult us for confirmation; do not make assumptions.

5. Complete Model Enumeration

The following lists the complete ordering code formats for the 3730-0 (16 digits). To avoid misinterpretation, the complete codes shown here are illustrations constructed according to the grouped, digit-by-digit structure; for the meaning of each digit refer to Section 4. For formal orders, the code generated by the SAMSON official selection tool shall prevail (please consult us for confirmation).

Complete ordering codeDigit-by-digit breakdown / Meaning
3730-0 1000000000000000P1=1 (ATEX Ex ia intrinsically safe); P2=0 no limit switch; P3=0 no solenoid valve; P4-P7=0000 no additional equipment; P8=0 standard; P15-P16=00 standard version
3730-0 0000000000000000P1=0 (no explosion protection); all other digits 0, standard configuration
3730-0 8000000000000000P1=8 (ATEX Ex nA non-sparking / dust option); remaining digits standard configuration; specific certification subject to the data sheet

Note: The above is for structural illustration only, to show that "3730-0 must be followed by a full 16-digit code"; it does not represent a confirmed model ready for direct ordering. For any uncertain position, always state "Please consult us for confirmation".

6. Related Models

Related modelType / Application
3730-1Non-communication digital type, with LCD and autotune, suitable for basic loops requiring local commissioning display
3730-2Non-communication full-featured type, with parameterization and EXPERTplus diagnostics
3730-3HART full-featured type, a widely used communication version in this family
3725Digital basic positioner, 10-digit ordering code, intrinsically safe Ex ia
3277 actuatorPneumatic diaphragm actuator directly integrated with the positioner (linear)

7. Common Spare Parts

ComponentDescription / Part number
Mechanical valve position feedback assemblyPart number: please consult us for confirmation
i/p converter assemblyPart number: please consult us for confirmation
Pneumatic amplifierPart number: please consult us for confirmation
Housing and cover assemblyPart number: please consult us for confirmation
Cable glandPart number: please consult us for confirmation
Source: SAMSON official data sheet NA 0122. Before ordering, please verify the complete model and configuration with us for part numbers.

8. Matching Accessories

AccessoryModel / SpecificationApplication
Filter pressure-reducing valvePlease consult us for confirmationFilters and stabilizes the instrument air supply pressure
Inductive limit switchSJ2-SN (normally closed contact)Limit position feedback
Solenoid valve24 V DCForced venting / emergency action
Reversing amplifier3710For use with double-acting actuators
Position transmitterPlease consult us for confirmationOutputs 4-20 mA valve position feedback

9. Disclaimer

The information above is not guaranteed to remain valid at all times. Subsequent changes will not be notified separately. Please confirm the latest information at the time of inquiry.

10. Sources & Contact

Source: SAMSON official data sheets T 8384-1 EN, T 8384-2 EN, NA 0122.

Ordering & Inquiry

If you need help confirming model numbers, configurations or availability, please feel free to contact us. We can assist with selection and technical confirmation based on your operating conditions and signal requirements.
Tel: +86 028-60220547  |  Email: info@bit-cd.com
Baoman Industrial Technology (Chengdu) Co., Ltd   Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China

Application area