Fisher DVC6200 SIS Digital Valve Controller | SIL3 Safety Positioner



The Fisher FIELDVUE DVC6200 SIS digital valve controller is a smart positioner designed for Safety Instrumented Systems (SIS), featuring partial stroke test (PST) and SIS diagnostics. exida-certified for SIL 3 safety applications, it is used as a shutdown valve positioner in emergency shutdown (ESD) service. It supports online verification of valve mobility, extending the interval between proof tests while monitoring the health of the entire valve assembly.
- Communication protocol: HART 5 (HART 7 optional) Dedicated Safety Instrumented System (SIS) · partial stroke test (PST) · exida SIL 3 certification · HART 5 (HART 7 optional)
- Functional safety: partial stroke test (PST), SIS diagnostics, SIL 3 (exida certified) Functional safety: partial stroke test (PST), SIS diagnostics, SIL 3 (exida certified)
- Input signal: 4-20 mA (point-to-point) or 0-24 V DC (multidrop), exida certified Input signal: 4-20 mA (point-to-point) or 0-24 V DC (multidrop), exida certified
- Supply pressure: Max. 10.0 bar (145 psig) Supply pressure: Max. 10.0 bar (145 psig)
- Ambient temperature: -52 ~ +85 °C (standard fluorosilicone elastomer) Ambient temperature: -52 ~ +85 °C (standard fluorosilicone elastomer)
- Protection rating: IP66 / NEMA 4X Protection rating: IP66 / NEMA 4X
- Amplifier: Low Bleed amplifier supplied as standard Amplifier: Low Bleed amplifier supplied as standard
## Technical Description
The DVC6200 SIS can assess valve condition online through partial stroke testing (PST) and full stroke testing, delivering easy-to-understand pass/fail results and the causes of abnormalities (such as sticking, pressure drop, friction changes, leakage, etc.) without taking the valve offline from the process. Valve diagnostic information can be read from any point on the communication loop, reducing personnel exposure to hazardous or hard-to-reach areas. The linkage-free non-contact feedback system and fully encapsulated electronics minimize the effects of pipeline vibration and environmental factors. The Outgoing Pressure Threshold function prevents overtravel of sticking valves and actuators, avoiding spurious trips.
Key configuration features: ① A Low Bleed amplifier is supplied as standard; only Low Bleed relays (38B5786X082/X122/X162) may be used. ② The cover is available only in the extreme-temperature version (fluorosilicone elastomer, GG53748X022). ③ All I/P converters use extreme-temperature elastomer; only 38B6041X132 is offered. ④ Fluorosilicone rubber elastomer is standard, with a lower operating temperature limit of -52 °C. Key configuration features: ① A Low Bleed amplifier is supplied as standard; only Low Bleed relays (38B5786X082/X122/X162) may be used. ② The cover is available only in the extreme-temperature version (fluorosilicone elastomer, GG53748X022). ③ All I/P converters use extreme-temperature elastomer; only 38B6041X132 is offered. ④ Fluorosilicone rubber elastomer is standard, with a lower operating temperature limit of -52 °C.


## Key Technical Specifications
| ## Key Technical Specifications | Parameter | Specification / Description | |
|---|---|
| Communication protocol: HART 5 (HART 7 optional) | Communication protocol | HART 5 or HART 7 | |
| Input signal: 4-20 mA (point-to-point) or 0-24 V DC (multidrop), exida certified | Input signal | 4-20 mA DC; minimum loop voltage 9.5 V (analog control) / 10 V (HART) for point-to-point; multidrop 11-30 VDC @ 10 mA; max. 30 VDC, with overcurrent/reverse-polarity protection | |
| Supply pressure: Max. 10.0 bar (145 psig) | Supply pressure | Max. 10.0 bar (145 psig) or the actuator's rated pressure, whichever is lower; compliant with ISA 7.0.01 and ISO 8573-1 (particles Class 7 / oil Class 3 / dew point Class 3) | |
| Output signal (pneumatic) | Up to full supply pressure; span 0.4-9.5 bar; double-acting / single-acting direct / single-acting reverse | | Output signal (pneumatic) | Up to full supply pressure; span 0.4-9.5 bar; double-acting / single-acting direct / single-acting reverse | |
| Electronic output | Integrated 4-20 mA position transmitter (8-30 VDC, reference accuracy 1% / safety accuracy 5%, compliant with NAMUR NE43) + integrated switch | | Electronic output | Integrated 4-20 mA position transmitter (8-30 VDC, reference accuracy 1% / safety accuracy 5%, compliant with NAMUR NE43) + integrated switch | |
| Steady-state air consumption | Low Bleed relay: 0.056 Nm³/h at 1.4 bar, 0.184 Nm³/h at 5.5 bar (average) | | Steady-state air consumption | Low Bleed relay: 0.056 Nm³/h at 1.4 bar, 0.184 Nm³/h at 5.5 bar (average) | |
| Operating ambient temperature | -52 ~ +85 °C | | Ambient temperature: -52 ~ +85 °C (standard fluorosilicone elastomer) |
| Independent linearity | Typical ±0.50% of output span | | Independent linearity | Typical ±0.50% of output span | |
| Actuator compatibility | Linear 6.5-606 mm; rotary 45-90° | | Actuator compatibility | Linear 6.5-606 mm; rotary 45-90° | |
| Connections | Supply/output: 1/4 NPT female; tubing: 3/8"; vent: 3/8 NPT; electrical: 1/2 NPT or M20 | | Connections | Supply/output: 1/4 NPT female; tubing: 3/8"; vent: 3/8 NPT; electrical: 1/2 NPT or M20 | |
| Protection rating: IP66 / NEMA 4X | Protection rating | CSA / FM Type 4X, IP66; ATEX / IECEx IP66 | |
| Weight | Aluminum 3.5 kg / stainless steel 8.6 kg; DVC6205 SIS 4.1 kg; DVC6215 1.4 kg | | Weight | Aluminum 3.5 kg / stainless steel 8.6 kg; DVC6205 SIS 4.1 kg; DVC6215 1.4 kg | |
| Materials of construction | Housing/module base/junction box: A03600 low-copper aluminum alloy (standard) or stainless steel; cover: thermoplastic polyester; elastomer: fluorosilicone rubber | | Materials of construction | Housing/module base/junction box: A03600 low-copper aluminum alloy (standard) or stainless steel; cover: thermoplastic polyester; elastomer: fluorosilicone rubber | |
| Hazardous-area certifications | CSA, FM, ATEX, IECEx, Lloyds Register, CUTR, INMETRO, KGS, NEPSI, PESO CCOE | | Hazardous-area certifications | CSA, FM, ATEX, IECEx, Lloyds Register, CUTR, INMETRO, KGS, NEPSI, PESO CCOE | |
| Functional safety: partial stroke test (PST), SIS diagnostics, SIL 3 (exida certified) | Functional safety | partial stroke test (PST), SIS diagnostics; Low Bleed amplifier supplied as standard; exida-certified for SIL 3 safety applications | |
## Selection Quick Reference (9-Segment Ordering Code)
| Segment | Item | Common Code Quick Reference | | Segment | Item | Common Code Quick Reference | | Segment | Item | Common Code Quick Reference | |
|---|---|---|
| Base model | Instrument model | DVC6200-SIS = digital valve controller with PST, supporting HART 5 and SIS diagnostics | | Base model | Instrument model | DVC6200-SIS = digital valve controller with PST, supporting HART 5 and SIS diagnostics | | Base model | Instrument model | DVC6200-SIS = digital valve controller with PST, supporting HART 5 and SIS diagnostics | |
| Segment 1 | Hazardous-area certification | 1C = ATEX intrinsic safety Ex ia; 1D = ATEX flameproof Ex d; 1F = IECEx; 1I = NEPSI (China); 1A/1B = CSA/FM; 1L = TIIS (Japan) | | Hazardous-area certifications | CSA, FM, ATEX, IECEx, Lloyds Register, CUTR, INMETRO, KGS, NEPSI, PESO CCOE | | Segment 1 | Hazardous-area certification | 1C = ATEX intrinsic safety Ex ia; 1D = ATEX flameproof Ex d; 1F = IECEx; 1I = NEPSI (China); 1A/1B = CSA/FM; 1L = TIIS (Japan) | |
| Segment 2 | Housing material | 2A = aluminum; 2B = stainless steel (housing B only) | | Segment 2 | Housing material | 2A = aluminum; 2B = stainless steel (housing B only) | | Segment 2 | Housing material | 2A = aluminum; 2B = stainless steel (housing B only) | |
| Segment 3 | Housing type | 3A = housing B (standard); 3B = housing A (integral, for Fisher GX valves only) | | Segment 3 | Housing type | 3A = housing B (standard); 3B = housing A (integral, for Fisher GX valves only) | | Segment 3 | Housing type | 3A = housing B (standard); 3B = housing A (integral, for Fisher GX valves only) | |
| Segment 4 | Input signal | 4A = 4-20 mA (point-to-point) with HART, exida certified; 4B = 0-24 V DC (multidrop), exida certified; 4C = 0-24 V DC multidrop with HART (supplied with DIN-rail LC340 line regulator) | | Input signal: 4-20 mA (point-to-point) or 0-24 V DC (multidrop), exida certified | Segment 4 | Input signal | 4A = 4-20 mA (point-to-point) with HART, exida certified; 4B = 0-24 V DC (multidrop), exida certified; 4C = 0-24 V DC multidrop with HART (supplied with DIN-rail LC340 line regulator) | |
| Segment 5 | Pneumatic action | 5A = single-acting direct on loss of power (Type C amplifier); 5B = single-acting reverse on power application (Type B); 5C = double-acting on loss of power (Type A) | | Segment 5 | Pneumatic action | 5A = single-acting direct on loss of power (Type C amplifier); 5B = single-acting reverse on power application (Type B); 5C = double-acting on loss of power (Type A) | | Segment 5 | Pneumatic action | 5A = single-acting direct on loss of power (Type C amplifier); 5B = single-acting reverse on power application (Type B); 5C = double-acting on loss of power (Type A) | |
| Segment 6 | Position feedback I/O | 6A = SIL 2 certified 4-20 mA position feedback transmitter (limit switches disabled); 6B = SIL 2 certified single limit switch (transmitter disabled) | | Segment 6 | Position feedback I/O | 6A = SIL 2 certified 4-20 mA position feedback transmitter (limit switches disabled); 6B = SIL 2 certified single limit switch (transmitter disabled) | | Segment 6 | Position feedback I/O | 6A = SIL 2 certified 4-20 mA position feedback transmitter (limit switches disabled); 6B = SIL 2 certified single limit switch (transmitter disabled) | |
| Segment 7 | Pressure gauge | 7A/7B = none; 7C = 0-60 psig / 0-4 bar; 7F = 0-160 psig / 0-11 bar; 7D/7E/7G/7H = other unit systems | | Figure A: Side view photo of the SIS (with feedback assembly and pressure gauge configuration) | Segment 7 | Pressure gauge | 7A/7B = none; 7C = 0-60 psig / 0-4 bar; 7F = 0-160 psig / 0-11 bar; 7D/7E/7G/7H = other unit systems | |
| Segment 8 | Threaded connections | 8A = 1/2 NPT + 1/4 NPT; 8B/8C = with M20 adapter (brass/stainless steel); 8D = M20 (for ATEX equipment) | | Segment 8 | Threaded connections | 8A = 1/2 NPT + 1/4 NPT; 8B/8C = with M20 adapter (brass/stainless steel); 8D = M20 (for ATEX equipment) | | Segment 8 | Threaded connections | 8A = 1/2 NPT + 1/4 NPT; 8B/8C = with M20 adapter (brass/stainless steel); 8D = M20 (for ATEX equipment) | |
| Segment 9 | Other options (multiple selection) | XX = none; RM = remote mount (DVC6205 SIS + DVC6215, rated 125 °C, aluminum only); SV = solenoid valve test function (single-acting only, includes a third pressure gauge); CG1/CG2 = sealing gland; LL = Lloyds Register certification; H7 = HART 7; SF = 10 μm supply air filter; PP = protective pipe plug; CC = custom | | Segment 9 | Other options (multiple selection) | XX = none; RM = remote mount (DVC6205 SIS + DVC6215, rated 125 °C, aluminum only); SV = solenoid valve test function (single-acting only, includes a third pressure gauge); CG1/CG2 = sealing gland; LL = Lloyds Register certification; H7 = HART 7; SF = 10 μm supply air filter; PP = protective pipe plug; CC = custom | | Segment 9 | Other options (multiple selection) | XX = none; RM = remote mount (DVC6205 SIS + DVC6215, rated 125 °C, aluminum only); SV = solenoid valve test function (single-acting only, includes a third pressure gauge); CG1/CG2 = sealing gland; LL = Lloyds Register certification; H7 = HART 7; SF = 10 μm supply air filter; PP = protective pipe plug; CC = custom | |
Typical ordering example: DVC6200-SIS 1D_2A_3A_4A_5A_6B_7F_8D_SV H7 — ATEX flameproof Ex d (1D), aluminum housing (2A), housing B (3A), HART 4-20 mA point-to-point input (4A), single-acting direct on loss of power (5A), SIL 2 single limit switch (6B), 0-160 psig/0-11 bar pressure gauge (7F), M20 + 1/4 NPT (8D), solenoid valve test function (SV), HART 7 (H7). Typical ordering example: DVC6200-SIS 1D_2A_3A_4A_5A_6B_7F_8D_SV H7 — ATEX flameproof Ex d (1D), aluminum housing (2A), housing B (3A), HART 4-20 mA point-to-point input (4A), single-acting direct on loss of power (5A), SIL 2 single limit switch (6B), 0-160 psig/0-11 bar pressure gauge (7F), M20 + 1/4 NPT (8D), solenoid valve test function (SV), HART 7 (H7).
## DVC6200 SIS Same-Series Model List
| Enumeration dimension | Model | Description | | Base model | Instrument model | DVC6200-SIS = digital valve controller with PST, supporting HART 5 and SIS diagnostics | | [Image Note] All photos above were taken by Baoman Industrial and uniformly bear the anti-theft watermark 'Baoman Industrial Technology (Chengdu) Co., Ltd +86 028-60220547'. Do not reproduce without permission. |
|---|---|---|
| Base model | Instrument model | DVC6200-SIS = digital valve controller with PST, supporting HART 5 and SIS diagnostics | | Base model | Instrument model | DVC6200-SIS = digital valve controller with PST, supporting HART 5 and SIS diagnostics | | Base model | DVC6200-SIS | Digital valve controller with PST, HART 5 and SIS diagnostics (HART 7 via option H7) | |
| Structural variants | DVC6205 SIS / DVC6215 | RM remote-mount combination: DVC6205 SIS is the remote-mounted body and DVC6215 is a separate remote travel sensor (rated 125 °C, aluminum only) | | Structural variants | DVC6205 SIS / DVC6215 | RM remote-mount combination: DVC6205 SIS is the remote-mounted body and DVC6215 is a separate remote travel sensor (rated 125 °C, aluminum only) | | Structural variants | DVC6205 SIS / DVC6215 | RM remote-mount combination: DVC6205 SIS is the remote-mounted body and DVC6215 is a separate remote travel sensor (rated 125 °C, aluminum only) | |
| Housing versions | Aluminum / stainless steel | 2A = aluminum (3.5 kg); 2B = stainless steel (8.6 kg, housing B only) | | Housing versions | Aluminum / stainless steel | 2A = aluminum (3.5 kg); 2B = stainless steel (8.6 kg, housing B only) | | Housing versions | Aluminum / stainless steel | 2A = aluminum (3.5 kg); 2B = stainless steel (8.6 kg, housing B only) | |
| Difference from the non-SIS version | DVC6200 (standard version) | On the standard version, PST requires the ODV (HART) or PS (FF) diagnostic tier as an option; on the SIS version, PST is standard and carries SIL 3 functional safety certification, with a different ordering code system (9 segments vs. 10 segments) | | Difference from the non-SIS version | DVC6200 (standard version) | On the standard version, PST requires the ODV (HART) or PS (FF) diagnostic tier as an option; on the SIS version, PST is standard and carries SIL 3 functional safety certification, with a different ordering code system (9 segments vs. 10 segments) | | Difference from the non-SIS version | DVC6200 (standard version) | On the standard version, PST requires the ODV (HART) or PS (FF) diagnostic tier as an option; on the SIS version, PST is standard and carries SIL 3 functional safety certification, with a different ordering code system (9 segments vs. 10 segments) | |
## Related Models
### Fisher DVC6200 (Standard Version)
HART/FF/PROFIBUS protocols, diagnostics up to ODV; mid-to-high-end applications in general control and isolation service.
View Series →### Fisher DVC2000
Entry level: HART 5, single-acting, LCD + 4-button local interface (12 languages), max. supply pressure 7 bar.
View Series →### Gulde 3800SA
Chinese-interface version built on the same line as the DVC2000; order by configuration models FS3800SA-105/205.
View Series →## Common Service Spare Parts (Part Numbers)
| Spare part category | Part number | Description | | ## Common Service Spare Parts (Part Numbers) | Spare part category | Part number | Description | |
|---|---|---|
| Cover assembly (COVER, including cover screws) | GG53748X022 | Cover assembly, extreme-temperature type (fluorosilicone elastomer) — the only option for SIS | | Key configuration features: ① A Low Bleed amplifier is supplied as standard; only Low Bleed relays (38B5786X082/X122/X162) may be used. ② The cover is available only in the extreme-temperature version (fluorosilicone elastomer, GG53748X022). ③ All I/P converters use extreme-temperature elastomer; only 38B6041X132 is offered. ④ Fluorosilicone rubber elastomer is standard, with a lower operating temperature limit of -52 °C. | Cover assembly (COVER, including cover screws) | GG53748X022 | Cover assembly, extreme-temperature type (fluorosilicone elastomer) — the only option for SIS | |
| Junction box terminal kit (JUNCTION BOX, for I/O-module versions only, replace like-for-like only) | 19B5401X552 | Aluminum alloy / with I/O module | | Junction box terminal kit (JUNCTION BOX, for I/O-module versions only, replace like-for-like only) | 19B5401X552 | Aluminum alloy / with I/O module | | Junction box terminal kit (JUNCTION BOX, for I/O-module versions only, replace like-for-like only) | 19B5401X552 | Aluminum alloy / with I/O module | |
| 19B5401X562 | Stainless steel / with I/O module | | 19B5401X562 | Stainless steel / with I/O module | | |
| 19B5401X582 | Aluminum alloy / with I/O module / M20 | | 19B5401X582 | Aluminum alloy / with I/O module / M20 | | |
| 19B5401X592 | Stainless steel / with I/O module / M20 | | 19B5401X592 | Stainless steel / with I/O module / M20 | | |
| Relay assembly (RELAY, Low Bleed type only for SIS, with fluorosilicone elastomer) | 38B5786X082 | Low Bleed / Type A (double-acting) / for housings A and B | | Key configuration features: ① A Low Bleed amplifier is supplied as standard; only Low Bleed relays (38B5786X082/X122/X162) may be used. ② The cover is available only in the extreme-temperature version (fluorosilicone elastomer, GG53748X022). ③ All I/P converters use extreme-temperature elastomer; only 38B6041X132 is offered. ④ Fluorosilicone rubber elastomer is standard, with a lower operating temperature limit of -52 °C. | Relay assembly (RELAY, Low Bleed type only for SIS, with fluorosilicone elastomer) | 38B5786X082 | Low Bleed / Type A (double-acting) / for housings A and B | |
| 38B5786X122 | Low Bleed / Type B (single-acting reverse) / for housings A and B | | 38B5786X122 | Low Bleed / Type B (single-acting reverse) / for housings A and B | | |
| 38B5786X162 | Low Bleed / Type C (single-acting direct) / for housings A and B | | 38B5786X162 | Low Bleed / Type C (single-acting direct) / for housings A and B | | |
| I/P converter kit | 38B6041X132 | Extreme-temperature type (fluorosilicone elastomer) — SIS uses extreme-temperature elastomer throughout; this is the only option | | Key configuration features: ① A Low Bleed amplifier is supplied as standard; only Low Bleed relays (38B5786X082/X122/X162) may be used. ② The cover is available only in the extreme-temperature version (fluorosilicone elastomer, GG53748X022). ③ All I/P converters use extreme-temperature elastomer; only 38B6041X132 is offered. ④ Fluorosilicone rubber elastomer is standard, with a lower operating temperature limit of -52 °C. | I/P converter kit | 38B6041X132 | Extreme-temperature type (fluorosilicone elastomer) — SIS uses extreme-temperature elastomer throughout; this is the only option | |
Notes: ① The SIS spare parts list does not separately list pressure gauge part numbers; consult us for confirmation of gauges by dial range (Segment 7 codes 7C~7H). ② SIS relays must be the Low Bleed type only and cannot be replaced with standard bleed types; the junction box is the I/O-module version and must be replaced like-for-like. ③ All SIS spare parts are of the extreme-temperature (fluorosilicone elastomer) configuration, matching the unit's -52 °C lower operating temperature limit.
## Accessories (Part Numbers)
| Accessory category | Part number | Description / Application | | ## Common Service Spare Parts (Part Numbers) | Accessory category | Part number | Description / Application | |
|---|---|---|
| Magnetic feedback array kit (magnet strip, sliding-stem) | GE65853X082 | Travel 7 mm / stainless steel | | Magnetic feedback array kit (magnet strip, sliding-stem) | GE65853X082 | Travel 7 mm / stainless steel | | Magnetic feedback array kit (magnet strip, sliding-stem) | GE65853X082 | Travel 7 mm / stainless steel | |
| GE65853X012 | Travel 19 mm / stainless steel | | GE65853X012 | Travel 19 mm / stainless steel | | |
| GE65853X022 | Travel 25 mm / stainless steel | | GE65853X022 | Travel 25 mm / stainless steel | | |
| GE65853X032 / X042 | Travel 38 / 50 mm / stainless steel | | GE65853X032 / X042 | Travel 38 / 50 mm / stainless steel | | |
| GE65853X062 / X072 | Travel 110 / 210 mm / stainless steel | | GE65853X062 / X072 | Travel 110 / 210 mm / stainless steel | | |
| GG20240X012 ~ GG20243X012 | Travel 7 ~ 210 mm / aluminum alloy | | GG20240X012 ~ GG20243X012 | Travel 7 ~ 210 mm / aluminum alloy | | |
| Rotary feedback array kit (for rotary actuators) | GE71982X012 | Rotary / aluminum alloy / with NAMUR coupler | | Rotary feedback array kit (for rotary actuators) | GE71982X012 | Rotary / aluminum alloy / with NAMUR coupler | | Rotary feedback array kit (for rotary actuators) | GE71982X012 | Rotary / aluminum alloy / with NAMUR coupler | |
| GE71982X022 | Rotary / stainless steel / with NAMUR coupler | | GE71982X022 | Rotary / stainless steel / with NAMUR coupler | | |
| GG10562X012 / X022 | Rotary / aluminum alloy (stainless steel) / with pointer + scale | | GG10562X012 / X022 | Rotary / aluminum alloy (stainless steel) / with pointer + scale | | |
| GG10562X012 rotary with beacon | The beacon version refers to the DVC6200 standard version GH19538X series; confirm compatibility with us | | GG10562X012 rotary with beacon | The beacon version refers to the DVC6200 standard version GH19538X series; confirm compatibility with us | | |
| Mounting bracket (657/667 actuators) | GG12343X012 | For 657/667 SIZE 30-60 (fits DVC2000/DVC6200) | | Mounting bracket (657/667 actuators) | GG12343X012 | For 657/667 SIZE 30-60 (fits DVC2000/DVC6200) | | Mounting bracket (657/667 actuators) | GG12343X012 | For 657/667 SIZE 30-60 (fits DVC2000/DVC6200) | |
| GG12361X012 | For 657/667 SIZE 70/76/87 (fits DVC2000/DVC6200) | | GG12361X012 | For 657/667 SIZE 70/76/87 (fits DVC2000/DVC6200) | | |
| MTG-225-1178199 | Stainless steel bracket for 657/667 SIZE 30-60, supplied with a 19 mm stainless steel magnet strip | | MTG-225-1178199 | Stainless steel bracket for 657/667 SIZE 30-60, supplied with a 19 mm stainless steel magnet strip | |
Notes: ① Select magnet strips/brackets according to the actuator's stroke and type; the stroke is based on the actuator's actual travel. ② A Fisher Series 67 filter regulator is recommended at the supply inlet (see the 67C/67CFR/67D product pages); air quality must meet ISA 7.0.01 and ISO 8573-1 requirements. ③ The SV solenoid valve test function (Segment 9 option) is available only on single-acting units and includes a third pressure gauge.
- ValveLink software — required to read SIS diagnostics and PST results. ValveLink software — required to read SIS diagnostics and PST results.
- HART handheld communicator (375/475) — remote configuration, parameter read/write, and diagnostics. HART handheld communicator (375/475) — remote configuration, parameter read/write, and diagnostics.
- Remote mount assembly (RM option) — DVC6205 SIS body + DVC6215 remote travel sensor, rated 125 °C, aluminum only. Remote mount assembly (RM option) — DVC6205 SIS body + DVC6215 remote travel sensor, rated 125 °C, aluminum only.
- PST solenoid valve — a solenoid valve test solution for performing partial stroke tests with the SIS positioner (SV option). PST solenoid valve — a solenoid valve test solution for performing partial stroke tests with the SIS positioner (SV option).
Disclaimer: The information above is not guaranteed to remain valid and is subject to change without prior notice. Please confirm the latest information at the time of inquiry.
Note: The technical data on this page is compiled from official Fisher product catalogs and manuals (D103557X012 / D104363X0CN) for selection reference only; the final model, parameters, and certification status are subject to official Emerson confirmation documents. Fisher, FIELDVUE, and ValveLink are trademarks of Emerson. The product main image on this page is a public product image from Emerson's website and is for product identification only; all photos were taken by Baoman Industrial and bear anti-theft watermarks. Do not reproduce without permission.Ordering & Inquiry
Baoman Industrial Technology (Chengdu) Co., Ltd Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China

简体中文
ENGLISH
