Home » Service & Support » Technical Documentation
Fisher HSR Regulator Internal Relief Function & Part Number Quick Reference
Release time:1970-01-01 08:33:46 | Views:

The HSR is a direct-operated, spring-loaded pressure reducing regulator with internal relief, used for residential, commercial and industrial gas pressure reduction. Its internal across-diaphragm relief automatically vents when the outlet pressure is over, making it a key component for safe operation. This article covers the internal relief working principle, main part numbers and maintenance precautions, based on the official Fisher Parts List.

I. Product Positioning

ItemDescription
BrandFisher (Emerson)
SeriesHSR
ConstructionDirect-operated, spring-loaded pressure reducing regulator with internal relief
ApplicationResidential, commercial and industrial gas pressure reduction
Relief typeInternal across-diaphragm relief, automatically vents through the spring case relief port on outlet overpressure
Relief setpoint6-12 in.w.c. / 15-30 mbar (above the outlet setting), only for the 6-8 and 8-10 in.w.c. spring ranges
Main official documentInstruction Manual D103074X012 (Form 5753, 2011-10), page 7 Parts List

Source: Fisher official Instruction Manual D103074X012 (Form 5753, 2011-10), page 7 Parts List.

Fisher HSR pressure reducing regulator with internal relief
Official product image, for selection reference only

II. Internal Relief Working Principle

When the outlet pressure exceeds the setpoint of the non-adjustable relief spring, the diaphragm lifts off the relief seat, and the excess pressure is discharged through the spring case relief port with a screen. The relief setpoint is 6-12 in.w.c. / 15-30 mbar (above the outlet setting) and applies only to the 6-8 and 8-10 in.w.c. spring ranges. The standard spring case relief connection is 1 NPT with a removable screen, with 3/4 NPT optional.

III. Main Part Numbers (Official Parts List)

KeyPart NamePart NumberMaterial
1Spring case assembly (3/4" vent)T40655T0GY2—
1Spring case assembly (1" vent)T40656T0GY2—
2Lower bodyT80565T0GY2Aluminum
3ScreenT112133898218-8 stainless steel
4LeverT21184T0012Cast steel
11Diaphragm (with integral relief valve)T21163T0012—
12Pusher postT40653T0012Acetal
10Relief valve springT14406T0012302 stainless steel
15Body Globe 3/4 NPTT21183T0GY2Cast iron
15Body Globe 3/4×1 NPTT21199T0GY2Cast iron
15Body Globe 1 NPTT21182T0GY2Cast iron
15Body Angle 3/4 NPTT21193T0GY2Cast iron

Source: Fisher official Instruction Manual D103074X012 (Form 5753, 2011-10), page 7 Parts List. Part numbers are subject to the official manual; please confirm before ordering.

IV. Maintenance Precautions

Allowable inlet pressure: emergency 150 psig / 10.3 bar; allowable outlet pressure (body) emergency 25 psig / 1.7 bar; to avoid damage to internal parts, the differential pressure above the outlet setpoint shall not exceed 3 psi / 0.21 bar. Temperature range -20 to 160°F / -29 to 71°C. Orifice sizes 1/8, 3/16, 1/4, 3/8, 1/2 in; pressure sensing is internal.

V. Selection Guide & Common Models

Selection guide: The HSR is a direct-operated, spring-loaded pressure reducing regulator with internal relief, suitable for residential, commercial and industrial gas pressure reduction; orifice sizes are 1/8, 3/16, 1/4, 3/8, 1/2 in with internal pressure sensing. The relief setpoint of 6-12 in.w.c. / 15-30 mbar (above the outlet setting) applies only to the 6-8 and 8-10 in.w.c. spring ranges; the standard spring case relief connection is 1 NPT with a removable screen, with 3/4 NPT optional. For maintenance and ordering, check part numbers against the official Parts List, and note the allowable inlet pressure (emergency 150 psig / 10.3 bar), allowable outlet pressure (body, emergency 25 psig / 1.7 bar), temperature range -20 to 160°F / -29 to 71°C and the limit of 3 psi / 0.21 bar above the outlet setpoint; please confirm before ordering.

Common models: HSR spring-loaded pressure regulator (internal-relief type), orifice sizes 1/8, 3/16, 1/4, 3/8, 1/2 in, internal pressure sensing; common discs and internal parts ordered per the official Parts List D103074X012.

If you are selecting a regulator for steam or gas service, or need to confirm HSR internal parts and part numbers, please feel free to contact us. We can help check the right configuration against your differential pressure, temperature and orifice requirements.

Orders & Inquiries

Baoman Industrial Technology (Chengdu) Co., Ltd
Tel: +86 028-60220547 | Email: info@bit-cd.com
Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China

The information above is not guaranteed to remain valid at all times. Subsequent changes will not be notified separately. Please confirm the latest information at the time of inquiry.