Home » Service & Support » Technical Documentation
Fisher 630 / 630R Regulator & Relief Valve Field Conversion Guide
Release time:1970-01-01 08:33:46 | Views:

The Fisher 630 Big Joe series includes the self-operated, spring-loaded 630 pressure reducing regulator and the 630R relief valve. The two can be converted into each other in the field, but the conversion involves replacement of internal parts and must be carried out in accordance with the official instruction manual. This article covers their structure and working principle, field interchangeability requirements, allowable pressure drop versus disk material and selection points, based on the official Fisher documentation.

I. Product Positioning

ItemDescription
BrandFisher (Emerson)
Series630 Big Joe series (630 pressure reducing regulator / 630R relief valve)
ConstructionSelf-operated, spring-loaded; the 630 is a pressure reducing regulator and the 630R is the relief valve of the same series
Maximum design inlet pressure1500 psig / 103 bar
Outlet pressure3 to 500 psig / 0.21 to 34.5 bar
Relief setting range630R: 3 to 250 psig
Typical applicationPrimary farm-tap or high-pressure industrial regulation; sour gas capability
Main official documentsInstruction Manual D100300X012 (Form 1243); Bulletin 71.4:630R

Source: Fisher official Instruction Manual D100300X012 (Form 1243); Bulletin 71.4:630R.

Fisher 630/630R regulator and relief valve
Official product image, for selection reference only

II. Structure and Working Principle

The 630 is a self-operated regulator with a maximum design inlet pressure of 1500 psig / 103 bar and an outlet pressure of 3 to 500 psig / 0.21 to 34.5 bar. It features sour gas service capability and is suitable for primary farm-tap or high-pressure industrial regulation. The 630R is the relief version of the same series, with a relief setting range of 3 to 250 psig.

III. Internal Parts Requirements for Field Interchangeability

Item630 Regulator to 630R Relief Valve
Internal parts to be replacedValve carrier, disk and orifice replaced according to relief service configuration
Pressure settingReset according to the 630R relief range of 3 to 250 psig
Pressure sensingInternal pressure sensing; spring case relief 1/4 NPT
PrecautionsAfter conversion, setting and leakage verification must be performed in accordance with the instruction manual; the medium temperature range is determined by the disk material

IV. Allowable Pressure Drop vs. Disk Material

Disk materialMaximum allowable differential pressure
PTFE / FKM / Nylon (PA)Up to 1500 psid
Nitrile (NBR)Approximately 41.4 psid (1/8"~3/16" orifice)

V. Selection Tips

Orifice sizes 1/8, 3/16, 1/4, 3/8, 1/2 in (3.18-12.7 mm); body 1" and 2" / DN 25 and 50; end connections NPT, ASME CL150 RF, CL300 RF, CL600 RF. The medium is natural gas, air or compatible gases. NACE materials are optional, and the official documentation notes that the 630 series has been evaluated for hydrogen service. Certifications such as PED/ATEX/UL are not explicitly stated in the official instruction manual; please confirm with Emerson.

Source: Fisher official Instruction Manual D100300X012 (Form 1243); Bulletin 71.4:630R.

VI. Selection Guide & Common Models

Selection guide: First decide whether the duty requires the 630 pressure reducing regulator or the 630R relief valve, then confirm the orifice size, body size and end connection against inlet pressure, outlet setpoint and medium: orifice sizes 1/8, 3/16, 1/4, 3/8, 1/2 in (3.18-12.7 mm), bodies 1" and 2" / DN 25 and 50, end connections NPT, ASME CL150 RF, CL300 RF and CL600 RF. Converting a 630 to a 630R requires replacing the valve carrier, disk and orifice, resetting to the 3 to 250 psig relief range and performing setting and leakage verification in accordance with the instruction manual; the medium temperature range is determined by the disk material. NACE sour-gas materials are optional; certifications such as PED/ATEX/UL are not explicitly stated in the official instruction manual, so please confirm with Emerson.

Common models: 630 (self-operated pressure regulator), 630R (relief version in the same series, convertible from the 630 by changing internal parts); orifice sizes 1/8, 3/16, 1/4, 3/8, 1/2 in; bodies 1″ / 2″ (DN25 / DN50); end connections NPT, ASME CL150/CL300/CL600 RF; NACE sour-gas materials optional.

If you are specifying a regulator for natural gas or air service, or would like to know about availability of the 630 / 630R and internal parts, please feel free to contact us. We can help check the right orifice and materials against your inlet pressure, outlet setpoint and media.

Orders & Inquiries

Baoman Industrial Technology (Chengdu) Co., Ltd
Tel: +86 028-60220547 | Email: info@bit-cd.com
Address: Room 1108, Building A, Tingbiao Central Plaza, No. 158 Erxianqiao East Road, Chenghua District, Chengdu, Sichuan Province, China

The information above is not guaranteed to remain valid at all times. Subsequent changes will not be notified separately. Please confirm the latest information at the time of inquiry.